MCU 32-bit STM32F ARM Cortex M3 RISC 32KB Flash 2.5V/3.3V 64-Pin LQFP Tray, STM32F102R6T6A, STMicroelectronics

The STM32F102xx medium-density USB access line incorporates the high-performance ARM Cortex -M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 16 or 32 Kbytes and SRAM of 4 or 6 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (one I²C, one SPI, one USB and two USARTs), one 12-bit ADC and two general-purpose 16-bit timers.The STM32F102xx family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F102xx medium-density USB access line is delivered in the LQFP48 7 × 7 mm and LQFP64 10 × 10 mm packages.The STM32F102xx medium-density USB access line microcontrollers are suitable for a wide range of applications.

  • Core: ARM® 32-bit Cortex® -M3 CPU
  • 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
  • Single-cycle multiplication and hardware division
  • Memories
  • 16 or 32 Kbytes of Flash memory
  • 4 or 6 Kbytes of SRAM
  • Clock, reset and supply management
  • 2.0 to 3.6 V application supply and I/Os
  • POR, PDR and programmable voltage detector (PVD)
  • 4-to-16 MHz crystal oscillator
  • Internal 8 MHz factory-trimmed RC
  • Internal 40 kHz RC
  • PLL for CPU clock
  • 32 kHz oscillator for RTC with calibration
  • Low power
  • Sleep, Stop and Standby modes
  • VBAT supply for RTC and backup registers
  • Debug mode
  • Serial wire debug (SWD) and JTAG interfaces
  • DMA
  • 7-channel DMA controller
  • Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
  • 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • Temperature sensor
  • Up to 51 fast I/O ports
  • 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
  • Up to 5 timers
  • Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
  • 2 watchdog timers (Independent and Window)
  • SysTick timer: 24-bit downcounter
  • Up to 5 communication interfaces
  • One I2C interface (SMBus/PMBus)
  • Two USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  • One SPI (12 Mbit/s)
  • One USB 2.0 full speed interface
  • CRC calculation unit, 96-bit unique ID
  • ECOPACK® packages
  • Характеристики

    Program_memory_type

    Flash

    Supplier_package

    LQFP

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0001117172/SGST-S-A0001117172-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    6 KB

    Program_memory_size

    32 Kb

    Product_dimensions

    10 x 10 x 1.4 mm

    Pin_count

    64

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    2.5, 3.3 V

    Watchdog

    2

    Eccn

    3A991.A.2

    Instruction_set_architecture

    RISC

    Htsn

    8542310001

    Тип интерфейса

    I2C/SPI/USART/USB

    Device_core

    ARM Cortex M3

    Data_bus_width

    32 Bit

    Country_of_origin

    China

    Бренд

    On_chip_adc

    16-chx12-bit

    Min_operating_supply_voltage

    2 V

    Number_of_timers

    2

    Number_of_programmable_i_os

    51

    Msl_level

    3

    Mounting

    Surface Mount

    Max_speed

    48 MHz

    Max_processing_temp

    260 °C

    Max_power_dissipation

    444 mW

    Max_operating_supply_voltage

    3.6 V

    Lead_finish

    Gold

    Артикул: STM32F102R6T6A

    Описание

    The STM32F102xx medium-density USB access line incorporates the high-performance ARM Cortex -M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 16 or 32 Kbytes and SRAM of 4 or 6 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (one I²C, one SPI, one USB and two USARTs), one 12-bit ADC and two general-purpose 16-bit timers.The STM32F102xx family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F102xx medium-density USB access line is delivered in the LQFP48 7 × 7 mm and LQFP64 10 × 10 mm packages.The STM32F102xx medium-density USB access line microcontrollers are suitable for a wide range of applications.

  • Core: ARM® 32-bit Cortex® -M3 CPU
  • 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
  • Single-cycle multiplication and hardware division
  • Memories
  • 16 or 32 Kbytes of Flash memory
  • 4 or 6 Kbytes of SRAM
  • Clock, reset and supply management
  • 2.0 to 3.6 V application supply and I/Os
  • POR, PDR and programmable voltage detector (PVD)
  • 4-to-16 MHz crystal oscillator
  • Internal 8 MHz factory-trimmed RC
  • Internal 40 kHz RC
  • PLL for CPU clock
  • 32 kHz oscillator for RTC with calibration
  • Low power
  • Sleep, Stop and Standby modes
  • VBAT supply for RTC and backup registers
  • Debug mode
  • Serial wire debug (SWD) and JTAG interfaces
  • DMA
  • 7-channel DMA controller
  • Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
  • 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • Temperature sensor
  • Up to 51 fast I/O ports
  • 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
  • Up to 5 timers
  • Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
  • 2 watchdog timers (Independent and Window)
  • SysTick timer: 24-bit downcounter
  • Up to 5 communication interfaces
  • One I2C interface (SMBus/PMBus)
  • Two USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  • One SPI (12 Mbit/s)
  • One USB 2.0 full speed interface
  • CRC calculation unit, 96-bit unique ID
  • ECOPACK® packages
  • Детали

    Program_memory_type

    Flash

    Supplier_package

    LQFP

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0001117172/SGST-S-A0001117172-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    6 KB

    Program_memory_size

    32 Kb

    Product_dimensions

    10 x 10 x 1.4 mm

    Pin_count

    64

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    2.5, 3.3 V

    Watchdog

    2

    Eccn

    3A991.A.2

    Instruction_set_architecture

    RISC

    Htsn

    8542310001

    Тип интерфейса

    I2C/SPI/USART/USB

    Device_core

    ARM Cortex M3

    Data_bus_width

    32 Bit

    Country_of_origin

    China

    Бренд

    On_chip_adc

    16-chx12-bit

    Min_operating_supply_voltage

    2 V

    Number_of_timers

    2

    Number_of_programmable_i_os

    51

    Msl_level

    3

    Mounting

    Surface Mount

    Max_speed

    48 MHz

    Max_processing_temp

    260 °C

    Max_power_dissipation

    444 mW

    Max_operating_supply_voltage

    3.6 V

    Lead_finish

    Gold