MCU 32-Bit STM32 ARM Cortex M7 RISC 1024KB Flash 1.8V/2.5V/3.3V 208-Pin LQFP Tray, STM32F756BGT6, STMicroelectronics

The STM32F756xx devices are based on the high-performance ARM Cortex -M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex -M7 core features a single floating point unit (SFPU) precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.The STM32F756xx devices incorporate high-speed embedded memories with Flash memory up to 1 Mbyte, 320 KB of SRAM (including 64 KB of Data TCM RAM for critical real time data), 16 KB of instruction TCM RAM (for critical real time routines), 4 KB of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.All devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers including two PWM timers for motor control and one low-power timer available in Stop mode, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.

  • Core: ARM® 32-bit Cortex®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
  • Memories
  • Up to 1MB of Flash memory
  • 1024 bytes of OTP memory
  • SRAM: 320KB (including 64KB of data TCM RAM for critical real time data) + 16KB of instruction TCM RAM (for critical real time routines) + 4KB of backup SRAM (available in the lowest power modes)
  • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
  • Dual mode Quad SPI
  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
  • Clock, reset and supply management
  • 1.7 V to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • Dedicated USB power
  • 4-to-26 MHz crystal oscillator
  • Internal 16 MHz factory-trimmed RC (1% accuracy)
  • 32 kHz oscillator for RTC with calibration
  • Internal 32 kHz RC with calibration
  • Low-power
  • Sleep, Stop and Standby modes
  • VBATsupply for RTC, 32×32 bit backup registers + 4KB backup SRAM
  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Debug mode
  • SWD & JTAG interfaces
  • Cortex®-M7 Trace Macrocell™
  • Up to 168 I/O ports with interrupt capability
  • Up to 164 fast I/Os up to 108 MHz
  • Up to 166 5 V-tolerant I/Os
  • Up to 25 communication interfaces
  • Up to 4× I²C interfaces (SMBus/PMBus)
  • Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
  • Up to 6 SPIs (up to 50 Mbits/s), 3 with muxed simplex I²S for audio class accuracy via internal audio PLL or external clock
  • 2 x SAIs (serial audio interface)
  • 2 × CANs (2.0B active) and SDMMC interface
  • SPDIFRX interface
  • HDMI-CEC
  • Advanced connectivity
  • USB 2.0 full-speed device/host/OTG controller with on-chip PHY
  • USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
  • 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC
  • True random number generator
  • CRC calculation unit
  • RTC: subsecond accuracy, hardware calendar
  • 96-bit unique ID
  • Характеристики

    Program_memory_type

    Flash

    Supplier_package

    LQFP

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0001540890/SGST-S-A0001540890-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Special_features

    CAN Controller, LCD Controller

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    340 KB

    Program_memory_size

    1024 KB

    Product_dimensions

    28 x 28 x 1.4

    Pin_count

    208

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    1.8, 2.5, 3.3 V

    Watchdog

    2

    On_chip_dac

    2(2-chx12-bit)

    Eccn

    5A992.C

    Instruction_set_architecture

    RISC

    Htsn

    8542310001

    Display_driver

    1

    Тип интерфейса

    CAN/Ethernet/I2C/I2S/SPI/UART/USART/USB

    Device_core

    ARM Cortex M7

    Data_bus_width

    32 Bit

    Бренд

    On_chip_adc

    3(24-chx12-bit)

    Min_operating_supply_voltage

    1.7 V

    Number_of_timers

    15

    Number_of_programmable_i_os

    168

    Mounting

    Surface Mount

    Max_speed

    216 MHz

    Max_power_dissipation

    1053 mW

    Max_operating_supply_voltage

    3.6 V

    Артикул: STM32F756BGT6

    Описание

    The STM32F756xx devices are based on the high-performance ARM Cortex -M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex -M7 core features a single floating point unit (SFPU) precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.The STM32F756xx devices incorporate high-speed embedded memories with Flash memory up to 1 Mbyte, 320 KB of SRAM (including 64 KB of Data TCM RAM for critical real time data), 16 KB of instruction TCM RAM (for critical real time routines), 4 KB of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.All devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers including two PWM timers for motor control and one low-power timer available in Stop mode, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.

  • Core: ARM® 32-bit Cortex®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
  • Memories
  • Up to 1MB of Flash memory
  • 1024 bytes of OTP memory
  • SRAM: 320KB (including 64KB of data TCM RAM for critical real time data) + 16KB of instruction TCM RAM (for critical real time routines) + 4KB of backup SRAM (available in the lowest power modes)
  • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
  • Dual mode Quad SPI
  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
  • Clock, reset and supply management
  • 1.7 V to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • Dedicated USB power
  • 4-to-26 MHz crystal oscillator
  • Internal 16 MHz factory-trimmed RC (1% accuracy)
  • 32 kHz oscillator for RTC with calibration
  • Internal 32 kHz RC with calibration
  • Low-power
  • Sleep, Stop and Standby modes
  • VBATsupply for RTC, 32×32 bit backup registers + 4KB backup SRAM
  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Debug mode
  • SWD & JTAG interfaces
  • Cortex®-M7 Trace Macrocell™
  • Up to 168 I/O ports with interrupt capability
  • Up to 164 fast I/Os up to 108 MHz
  • Up to 166 5 V-tolerant I/Os
  • Up to 25 communication interfaces
  • Up to 4× I²C interfaces (SMBus/PMBus)
  • Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
  • Up to 6 SPIs (up to 50 Mbits/s), 3 with muxed simplex I²S for audio class accuracy via internal audio PLL or external clock
  • 2 x SAIs (serial audio interface)
  • 2 × CANs (2.0B active) and SDMMC interface
  • SPDIFRX interface
  • HDMI-CEC
  • Advanced connectivity
  • USB 2.0 full-speed device/host/OTG controller with on-chip PHY
  • USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
  • 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s
  • Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC
  • True random number generator
  • CRC calculation unit
  • RTC: subsecond accuracy, hardware calendar
  • 96-bit unique ID
  • Детали

    Program_memory_type

    Flash

    Supplier_package

    LQFP

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0001540890/SGST-S-A0001540890-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Special_features

    CAN Controller, LCD Controller

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    340 KB

    Program_memory_size

    1024 KB

    Product_dimensions

    28 x 28 x 1.4

    Pin_count

    208

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    1.8, 2.5, 3.3 V

    Watchdog

    2

    On_chip_dac

    2(2-chx12-bit)

    Eccn

    5A992.C

    Instruction_set_architecture

    RISC

    Htsn

    8542310001

    Display_driver

    1

    Тип интерфейса

    CAN/Ethernet/I2C/I2S/SPI/UART/USART/USB

    Device_core

    ARM Cortex M7

    Data_bus_width

    32 Bit

    Бренд

    On_chip_adc

    3(24-chx12-bit)

    Min_operating_supply_voltage

    1.7 V

    Number_of_timers

    15

    Number_of_programmable_i_os

    168

    Mounting

    Surface Mount

    Max_speed

    216 MHz

    Max_power_dissipation

    1053 mW

    Max_operating_supply_voltage

    3.6 V