MCU 32-Bit STM32 ARM Cortex M4 RISC 16KB Flash 2.5V/3.3V 48-Pin LQFP Tray

The STM32F334x4/6/8 family is based on the high-performance ARM 32-bit Cortex-M4 RISC core operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU). The STM32F334x4/6/8 family incorporates high-speed embedded memories(up to 64 Kbytes of Flash memory, up to 12 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.The STM32F334x4/6/8 devices offer a High resolution timer, two fast 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, a low-power RTC, one high-resolution timer, one general-purpose 32-bit timer, one timer dedicated to motor control, and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I²C, one SPI, up to three USARTs and one CAN.The STM32F334x4/6/8 family operates in the –40 to +85 °C and –40 to +105 °C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F334x4/6/8 family offers devices in 32, 48 and 64-pin packages.The set of included peripherals changes with the device chosen.

Core: ARM® Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction

Memories

Up to 64 KB of Flash memory

Up to 12 KB of SRAM with HW parity check

Routine booster: 4 KB of SRAM on instruction and data bus with HW parity check (CCM)

CRC calculation unit

Reset and supply management

V_DD,V_DDA voltage range: 2.0 to 3.6 V

Power-on/Power-down reset (POR/PDR)

Programmable voltage detector (PVD)

Low-power modes: Sleep,Stop,Standby

V_BATsupply for RTC and backup registers

Clock management

4 to 32 MHz crystal oscillator

32 kHz oscillator for RTC with calibration

Internal 8 MHz RC (up to 64 MHz with PLL option)

Internal 40 kHz oscillator

Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant

Interconnect Matrix

7-channel DMA controller

Up to two ADC 0.20 µs (up to 21 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single-ended/differential mode, separate analog supply from 2.0 to 3.6 V

Temperature sensor

Up to three 12-bit DAC channels with analog supply from 2.4 V to 3.6 V

Three ultra-fast rail-to-rail analog comparators with analog supply from 2 V to 3.6 V

One operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V

Up to 18 capacitive sensing channels supporting touchkeys, linear and rotary touch sensors

Up to 12 timers

HRTIM: 6 x16-bit counters, 217 ps resolution, 10 PWM, 5 fault inputs, 10 ext event input, 1 synchro. input,1 synchro. out

One 32-bit timer and one 16-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop

One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation, emergency stop

Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop

Two watchdog timers (independent, window)

SysTick timer: 24-bit downcounter

Up to two 16-bit basic timers to drive DAC

Calendar RTC with alarm, periodic wakeup from Stop

Communication interfaces

CAN interface (2.0 B Active) and one SPI

One I²C with 20 mA current sink to support Fast mode plus, SMBus/PMBus

Up to 3 USARTs, one with ISO/IEC 7816 interface, LIN, IrDA, modem control

Debug mode: serial wire debug (SWD), JTAG

96-bit unique ID

All packages ECOPACK®2