This microcontroller is a 32-bit system-on-chip (SoC) device intended for use in mid-range engine control and automotive transmission control applications.It is compatible with devices in ST"s SPC56xx family and offers performance and capability above that of the SPC563M devices.The microcontroller"s e200z4 host processor core is built on the Power Architecture technology and designed specifically for embedded applications. In addition to the Power Architecture technology, this core supports instructions for digital signal processing (DSP).The device has two levels of memory hierarchy consisting of 8 KB of instruction cache, backed by a 128 KB on-chip SRAM and a 2 MB internal flash memory.For development, the device includes a calibration bus that is accessible only when using the STMicroelectronics calibration tool.
150 MHz e200z4 Power Architecture® core
Variable length instruction encoding (VLE)
Superscalar architecture with 2 execution units
Up to 2 integer or floating point instructions per cycle
Up to 4 multiply and accumulate operations per cycle
Memory organization
2 MB on-chip flash memory with ECC and read-while-write (RWW)
128 KB on-chip SRAM with standby functionality (32 KB) and ECC
8 KB instruction cache (with line locking), configurable as 2- or 4-way
14 + 3 KB eTPU code and data RAM
4 x 4 crossbar switch (XBAR)
24-entry MMU
Fail Safe Protection
16-entry Memory Protection Unit (MPU)
CRC unit with 3 submodules
Junction temperature sensor
Interrupt
Configurable interrupt controller (INTC) with non-maskable interrupt (NMI)
64-channel eDMA
Serial channels
3 eSCI modules
3 DSPI modules (2 of which support downstream Micro Second Channel [MSC])
3 FlexCAN modules with 64 message buffers each
1 FlexRay module (V2.1) up to 10 Mbit/s w/dual or single channel, 128 message objects, ECC
1 eMIOS (24 unified channels)
1 eTPU2 (second generation eTPU)
32 standard channels
1 reaction module (6 channels with 3 outputs per channel)
2 enhanced queued analog-to-digital converters (eQADCs)
Forty 12-bit input channels
688 ns minimum conversion time
On-chip CAN/SCI Bootstrap loader with Boot Assist Module (BAM)
Nexus: Class 3+ for core; Class 1 for eTPU
JTAG (5-pin)
Development Trigger Semaphore (DTS)
Clock generation
On-chip 4-40 MHz main oscillator
On-chip FMPLL (frequency-modulated phase-locked loop)
Up to 112 general purpose I/O lines
Power reduction modes: slow, stop, and standby
Flexible supply scheme
5 V single supply with external ballast
Multiple external supply: 5 V, 3.3 V , and 1.2 V
Designed for LQFP176, LBGA208, PBGA324
