The SPC560B64A100S, SPC560BADPT144S and SPC560BADPT176S are evaluation systems supporting the STMicroelectronics SPC560Bxx family of automotive microprocessors. The complete system consists of a SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.The evaluation systems allow full access to the CPU, to all of the CPU’s I/O signals and to the motherboard’s peripherals (such as CAN, SCI and LIN).The mini modules itself can be used as a stand-alone unit when access to the I/O pins or peripherals is not needed.
SPC560Bxx modular evaluation system
On/off power switch with LED indicators
Board power supply: 12 VDC external supply voltage
Onboard STMicroelectronics® L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
Up to two CAN channels with jumper enable1
One CAN channel with High-Speed transceiver and DB9 male connector
One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
Up to two LIN channels with jumper enable(a)
One channel with transceiver and pin header connector populated
One channel with footprints only
One SCI channel with jumper enables, transceiver and DB9 female connector
Four user push buttons with jumper enable and polarity selection
Four user LED’s with jumper enables
One potentiometer for analog voltage input
Pin array for accessing all I/O signals
Expansion connectors for accessing all I/O signals
Prototyping area with 0.1” spacing and SOIC footprint
Specifications:
Board size 110 mm x 75 mm
12 VDC Center Positive power supply with 2.5/5.5 mm barrel connector
