MCU 32-Bit PSoC ARM Cortex M3 RISC 256KB Flash 1.8V/3.3V/5V 100-Pin TQFP Tray, CY8C5468AXI-LP042, Rochester Electronics

PSoC 5LP is a true programmable embedded system-on-chip, integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The PSoC 5LP architecture boosts performance through: 32-bit ARM Cortex-M3 core plus DMA controller at up to 80 MHz, Ultra low power with industry"s widest voltage range, Programmable digital and analog peripherals enable custom functions, Flexible routing of any analog or digital peripheral function to any pin PSoC devices employ a highly configurable system-on-chip architecture for embedded control design. They integrate configurable analog and digital circuits, controlled by an on-chip microcontroller. A single PSoC device can integrate as many as 100 digital and analog peripheral functions, reducing design time, board space, power consumption, and system cost while improving system quality.

  • Operating characteristics
    • Voltage range: 1.71 to 5.5 V, up to 6 power domains
    • Temperature range (ambient) -40 to 85 °C
    • DC to 80-MHz operation
    • Power modes
    • Active mode 3.1 mA at 6 MHz, and 15.4 mA at 48 MHz
    • 2-µA sleep mode
    • 300-nA hibernate mode with RAM retention
    • Boost regulator from 0.5-V input up to 5-V output
  • Performance
    • 32-bit ARM Cortex-M3 CPU, 32 interrupt inputs
    • 24-channel direct memory access (DMA) controller
  • Memories
    • Up to 256 KB program flash, with cache and security features
    • Up to 32 KB additional flash for error correcting code (ECC)
    • Up to 64 KB RAM
    • 2 KB EEPROM
  • Digital peripherals
    • Four 16-bit timer, counter, and PWM (TCPWM) blocks
    • I²C, 1 Mbps bus speed
    • USB 2.0 certified Full-Speed (FS) 12 Mbps
    • 20 to 24 universal digital blocks (UDB), programmable to create any number of functions
    • 8-, 16-, 24-, and 32-bit timers, counters, and PWMs
    • I²C, UART, SPI, I2S, LIN 2.0 interfaces
    • Cyclic redundancy check (CRC)
    • Pseudo random sequence (PRS) generators
    • Quadrature decoders
    • Gate-level logic functions
  • Programmable clocking
    • 3- to 74-MHz internal oscillator, 2% accuracy at 3 MHz
    • 4- to 25-MHz external crystal oscillator
    • Internal PLL clock generation up to 80 MHz
    • Low-power internal oscillator at 1, 33, and 100 kHz
    • 32.768-kHz external watch crystal oscillator
    • 12 clock dividers routable to any peripheral or I/O
  • Package options: 68-pin QFN and 100-pin TQFP

Характеристики

Program_memory_type

Flash

Supplier_package

TQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0003061749/CYPR-S-A0003048506-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

LCD Controller

Screening_level

Industrial

Schedule_b

8542390000

Ram_size

64 KB

Program_memory_size

256 KB

Product_dimensions

14 x 14 x 1.4

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 3.3, 5 V

Watchdog

1

Analog_comparators

4

Eccn

3A991.A.3

Htsn

8542310001

Тип интерфейса

I2C/SPI/UART/USB

Device_core

ARM Cortex M3

Country_of_origin

Taiwan

Бренд

Min_operating_supply_voltage

1.71 V

Number_of_timers

4

Number_of_programmable_i_os

72

Msl_level

3

Mounting

Surface Mount

Max_speed

67 MHz

Max_processing_temp

260 °C

Max_operating_supply_voltage

5.5 V

Lead_finish

Gold Over Nickel Palladium

Артикул: CY8C5468AXI-LP042

Описание

PSoC 5LP is a true programmable embedded system-on-chip, integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The PSoC 5LP architecture boosts performance through: 32-bit ARM Cortex-M3 core plus DMA controller at up to 80 MHz, Ultra low power with industry"s widest voltage range, Programmable digital and analog peripherals enable custom functions, Flexible routing of any analog or digital peripheral function to any pin PSoC devices employ a highly configurable system-on-chip architecture for embedded control design. They integrate configurable analog and digital circuits, controlled by an on-chip microcontroller. A single PSoC device can integrate as many as 100 digital and analog peripheral functions, reducing design time, board space, power consumption, and system cost while improving system quality.

  • Operating characteristics
    • Voltage range: 1.71 to 5.5 V, up to 6 power domains
    • Temperature range (ambient) -40 to 85 °C
    • DC to 80-MHz operation
    • Power modes
    • Active mode 3.1 mA at 6 MHz, and 15.4 mA at 48 MHz
    • 2-µA sleep mode
    • 300-nA hibernate mode with RAM retention
    • Boost regulator from 0.5-V input up to 5-V output
  • Performance
    • 32-bit ARM Cortex-M3 CPU, 32 interrupt inputs
    • 24-channel direct memory access (DMA) controller
  • Memories
    • Up to 256 KB program flash, with cache and security features
    • Up to 32 KB additional flash for error correcting code (ECC)
    • Up to 64 KB RAM
    • 2 KB EEPROM
  • Digital peripherals
    • Four 16-bit timer, counter, and PWM (TCPWM) blocks
    • I²C, 1 Mbps bus speed
    • USB 2.0 certified Full-Speed (FS) 12 Mbps
    • 20 to 24 universal digital blocks (UDB), programmable to create any number of functions
    • 8-, 16-, 24-, and 32-bit timers, counters, and PWMs
    • I²C, UART, SPI, I2S, LIN 2.0 interfaces
    • Cyclic redundancy check (CRC)
    • Pseudo random sequence (PRS) generators
    • Quadrature decoders
    • Gate-level logic functions
  • Programmable clocking
    • 3- to 74-MHz internal oscillator, 2% accuracy at 3 MHz
    • 4- to 25-MHz external crystal oscillator
    • Internal PLL clock generation up to 80 MHz
    • Low-power internal oscillator at 1, 33, and 100 kHz
    • 32.768-kHz external watch crystal oscillator
    • 12 clock dividers routable to any peripheral or I/O
  • Package options: 68-pin QFN and 100-pin TQFP

Детали

Program_memory_type

Flash

Supplier_package

TQFP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0003061749/CYPR-S-A0003048506-1.pdf?hkey=52A5661711E402568146F3353EA87419

Special_features

LCD Controller

Screening_level

Industrial

Schedule_b

8542390000

Ram_size

64 KB

Program_memory_size

256 KB

Product_dimensions

14 x 14 x 1.4

Pin_count

100

Operating_temperature

-40 to 85 °C

Operating_supply_voltage

1.8, 3.3, 5 V

Watchdog

1

Analog_comparators

4

Eccn

3A991.A.3

Htsn

8542310001

Тип интерфейса

I2C/SPI/UART/USB

Device_core

ARM Cortex M3

Country_of_origin

Taiwan

Бренд

Min_operating_supply_voltage

1.71 V

Number_of_timers

4

Number_of_programmable_i_os

72

Msl_level

3

Mounting

Surface Mount

Max_speed

67 MHz

Max_processing_temp

260 °C

Max_operating_supply_voltage

5.5 V

Lead_finish

Gold Over Nickel Palladium