MCU 32-Bit MB9B310N ARM Cortex M3 RISC 288KB Flash 3.3V/5V 100-Pin LQFP, MB9BF314NPMC-G-JNE2, Rochester Electronics

The MB9BF314N is a highly integrated 32-bit microcontrollers dedicated for embedded controllers with high-performance and competitive cost. These series are based on the ARM Cortex-M3 Processor with on-chip Flash memory and SRAM, and has peripheral functions such as Motor Control Timers, ADCs and Communication Interfaces (USB, UART, CSIO, I2C, LIN).

  • 32-bit ARM Cortex-M3 Core
    • Processor version: r2p1
    • Up to 144MHz Frequency Operation
    • Memory Protection Unit (MPU): improves the reliability of an embedded system
    • Integrated Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 48 peripheral interrupts and 16 priority levels
    • 24-bit System timer (Sys Tick): System timer for OS task management
  • On-chip Memories [Flash memory] These series are based on two independent on-chip Flash memories.
    • MainFlash
    • Up to 512Kbyte
    • Built-in Flash Accelerator System with 16Kbyte trace buffer memory
    • The read access to Flash memory can be achieved without wait cycle up to operation frequency of 72MHz. Even at the operation frequency more than 72MHz, an equivalent access to Flash memory can be obtained by Flash Accelerator System.
    • Security function for code protection
    • WorkFlash
    • 32Kbyte
    • Read cycle
    • 4wait-cycle: the operation frequency more than 72MHz
    • 2wait-cycle: the operation frequency more than 40MHz, and to 72MHz
    • 0wait-cycle: the operation frequency to 40MHz
    • Security function is shared with code protection
  • [SRAM]: This Series contain a total of up to 64Kbyte on-chip SRAM memories. This is composed of two independent SRAM (SRAM0, SRAM1). SRAM0 is connected to I-code bus or D-code bus of Cortex-M3 core. SRAM1 is connected to System bus.
    • SRAM0: Up to 32 Kbyte
    • SRAM1: Up to 32 Kbyte
  • External Bus Interface
    • Supports SRAM, NOR and NAND Flash device
    • Up to 8 chip selects
    • 8/16-bit Data width
    • Up to 25-bit Address bit
    • Supports Address/Data multiplex
    • Supports external RDY input
  • A/D Converter (Max 16channels)
  • DMA Controller (8channels)
  • Base Timer (Max 8channels)

Характеристики

Program_memory_type

Flash

Htsn

8542310001

Max_speed

144 MHz

Mounting

Surface Mount

Number_of_programmable_i_os

83

Number_of_timers

5

Min_operating_supply_voltage

2.7 V

On_chip_adc

3(16-chx12-bit)

Бренд

Country_of_origin

United States

Data_bus_width

32 Bit

Device_core

ARM Cortex M3

Тип интерфейса

CSIO/I2C/LIN/UART/USB

Instruction_set_architecture

RISC

Supplier_package

LQFP

Eccn

3A991.A

Watchdog

2

Operating_supply_voltage

3.3, 5 V

Operating_temperature

-40 to 85 °C

Pin_count

100

Product_dimensions

14 x 14 x 1.4

Program_memory_size

288 KB

Ram_size

32 KB

Schedule_b

8542390000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0006313869/CYPR-S-A0006313964-1.pdf?hkey=52A5661711E402568146F3353EA87419

Max_operating_supply_voltage

5.5 V

Артикул: MB9BF314NPMC-G-JNE2

Описание

The MB9BF314N is a highly integrated 32-bit microcontrollers dedicated for embedded controllers with high-performance and competitive cost. These series are based on the ARM Cortex-M3 Processor with on-chip Flash memory and SRAM, and has peripheral functions such as Motor Control Timers, ADCs and Communication Interfaces (USB, UART, CSIO, I2C, LIN).

  • 32-bit ARM Cortex-M3 Core
    • Processor version: r2p1
    • Up to 144MHz Frequency Operation
    • Memory Protection Unit (MPU): improves the reliability of an embedded system
    • Integrated Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 48 peripheral interrupts and 16 priority levels
    • 24-bit System timer (Sys Tick): System timer for OS task management
  • On-chip Memories [Flash memory] These series are based on two independent on-chip Flash memories.
    • MainFlash
    • Up to 512Kbyte
    • Built-in Flash Accelerator System with 16Kbyte trace buffer memory
    • The read access to Flash memory can be achieved without wait cycle up to operation frequency of 72MHz. Even at the operation frequency more than 72MHz, an equivalent access to Flash memory can be obtained by Flash Accelerator System.
    • Security function for code protection
    • WorkFlash
    • 32Kbyte
    • Read cycle
    • 4wait-cycle: the operation frequency more than 72MHz
    • 2wait-cycle: the operation frequency more than 40MHz, and to 72MHz
    • 0wait-cycle: the operation frequency to 40MHz
    • Security function is shared with code protection
  • [SRAM]: This Series contain a total of up to 64Kbyte on-chip SRAM memories. This is composed of two independent SRAM (SRAM0, SRAM1). SRAM0 is connected to I-code bus or D-code bus of Cortex-M3 core. SRAM1 is connected to System bus.
    • SRAM0: Up to 32 Kbyte
    • SRAM1: Up to 32 Kbyte
  • External Bus Interface
    • Supports SRAM, NOR and NAND Flash device
    • Up to 8 chip selects
    • 8/16-bit Data width
    • Up to 25-bit Address bit
    • Supports Address/Data multiplex
    • Supports external RDY input
  • A/D Converter (Max 16channels)
  • DMA Controller (8channels)
  • Base Timer (Max 8channels)

Детали

Program_memory_type

Flash

Htsn

8542310001

Max_speed

144 MHz

Mounting

Surface Mount

Number_of_programmable_i_os

83

Number_of_timers

5

Min_operating_supply_voltage

2.7 V

On_chip_adc

3(16-chx12-bit)

Бренд

Country_of_origin

United States

Data_bus_width

32 Bit

Device_core

ARM Cortex M3

Тип интерфейса

CSIO/I2C/LIN/UART/USB

Instruction_set_architecture

RISC

Supplier_package

LQFP

Eccn

3A991.A

Watchdog

2

Operating_supply_voltage

3.3, 5 V

Operating_temperature

-40 to 85 °C

Pin_count

100

Product_dimensions

14 x 14 x 1.4

Program_memory_size

288 KB

Ram_size

32 KB

Schedule_b

8542390000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CYPR/CYPR-S-A0006313869/CYPR-S-A0006313964-1.pdf?hkey=52A5661711E402568146F3353EA87419

Max_operating_supply_voltage

5.5 V