Описание
The LPC11U12FBD48 is a ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The LPC11U12FBD48 operates at CPU frequencies of up to 50 MHz. The peripheral complement of the LPC11U12FBD48 includes up to 16 kB of flash memory, 6 kB of SRAM data memory, a highly flexible and configurable Full Speed USB 2.0 device controller, one Fast-mode Plus I2C-bus interface, one RS-485/EIA-485 USART with support for synchronous mode and smart card interface, one SSP interface, four general purpose counter/timers, a 10-bit ADC, and up to 40 general purpose I/O pins.
- ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
- ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
- Non Maskable Interrupt (NMI) input selectable from several input sources
- System tick timer
- Up to 16 kB on-chip flash program memory
- 6 kB SRAM data memory
- 16 kB boot ROM
- In-System Programming (ISP) and In-Application Programming (IAP)
- Standard JTAG test/debug interface
- Serial Wire Debug
- Boundary scan for simplified board testing
- Up to 40 General Purpose I/O (GPIO) pins
- GPIO pins can be used as edge and level sensitive interrupt sources
- GPIO grouped interrupt module
- High-current source output driver (20 mA) on one pin (P0_7)
- High-current sink driver (20 mA) on true open-drain pins (P0_4 and P0_5)
- Four general purpose counter/timers
- Programmable Windowed WatchDog Timer (WWDT)
- 10-bit ADC with input multiplexing among eight pins
- USB 2.0 full-speed device controller
- USART with fractional baud rate generation
- One SSP controller with FIFO and multi-protocol capabilities
- I2C-bus interface supporting the full I2C-bus specification and Fast-mode Plus
- Crystal Oscillator with an operating range of 1 MHz to 25 MHz
- Internal low-power, low-frequency WatchDog Oscillator (WDO)
- PLL allows CPU operation up to the maximum CPU rate
- A second, dedicated PLL is provided for USB
- Clock output function with divider
- Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
- Power profiles residing in boot ROM allowing to optimize performance
- Processor wake-up from Deep-sleep and Power-down modes
- Processor wake-up from Deep power-down mode using one special function pin
- Integrated PMU (Power Management Unit) to minimize power consumption
- Power-On Reset (POR)
- Brownout detect with four separate thresholds for interrupt and forced reset
- Unique device serial number for identification
- Single 3.3 V power supply (1.8 V to 3.6 V)
- Temperature range -40 °C to +85 °C
- Pin compatible to the LPC134x series
