MCU 32-Bit KL33 ARM Cortex M0+ RISC 64KB Flash 1.8V/2.5V/3.3V 80-Pin LQFP Tray, MKL33Z64VLK4, NXP

The KL33 series is optimized for cost-sensitive and batterypowered applications requiring low-power segment LCD. The product offers: • Low power segment LCD up to 40×8/42×6/44×4 • Embedded ROM with boot loader for flexible program upgrade • High accuracy internal voltage and clock reference • FlexIO to support any standard and customized serial peripheral emulation • Hardware CRC module • Down to 60uA/MHz in very low power run mode and 1.83uA in deep sleep mode (RAM + RTC retained)

  • Core Processor
    • ARM® Cortex®-M0+ core up to 48 MHz
  • Memories
    • 32/64 KB program flash memory
    • 4/8 KB SRAM
    • 8 KB ROM with build-in bootloader
    • 32-byte backup register
  • System
    • 4-channel asynchronous DMA controller
    • Watchdog
    • Low-leakage wakeup unit
    • Two-pin Serial Wire Debug (SWD) programming and debug interface
    • Micro Trace Buffer
    • Bit manipulation engine
    • Interrupt controller
  • Clocks
    • 48 MHz high accuracy (up to 0.5%) internal reference clock
    • 8MHz/2MHz high accuracy (up to 3%) internal reference clock
    • 1KHz reference clock active under all low-power modes (except VLLS0)
    • 32–40KHz and 3–32MHz crystal oscillator Operating Characteristics
    • Voltage range: 1.71 to 3.6 V
    • Flash write voltage range: 1.71 to 3.6 V
    • Temperature range: –40 to 105 °C
  • Peripherals
    • Segment LCD supporting up to 40×8/42×6/44×4 segments
    • One UART module supporting ISO7816, operating up to 1.5 Mbit/s
    • Two low-power UART modules supporting asynchronous operation in low-power modes
    • Two I²C modules and I²C0 supporting up to 1 Mbit/s
    • Two 16-bit SPI modules supporting up to 24 Mbit/s
    • One FlexIO module supporting emulation of additional UART, IrDA, SPI, I2C, PWM and other serial modules, etc.
    • One 16-bit 818 ksps ADC module with high accuracy internal voltage reference (Vref) and up to 20 channels
    • High-speed analog comparator containing a 6-bit DAC for programmable reference input
    • One 12-bit DAC
    • 1.2 V internal voltage reference
  • Timers
    • One 6-channel Timer/PWM module
    • Two 2-channel Timer/PWM modules
    • One low-power timer
    • Periodic interrupt timer
    • Real time clock
  • Security and Integrity
    • 80-bit unique identification number per chip
    • Advanced flash security
    • Hardware CRC module
  • I/O
    • Up to 70 general-purpose input/output pins (GPIO) and 4 high-drive pad
  • Low Power
    • Down to 60uA/MHz in very low power run mode
    • Down to 1.83uA in VLLS3 mode (RAM + RTC retained)
    • Six flexible static modes

Характеристики

Product_dimensions

12 x 12 x 1.4

Special_features

LCD Controller

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

8 KB

Program_memory_type

Flash

Program_memory_size

64 KB

Pin_count

80

Supplier_package

LQFP

Operating_temperature

-40 to 105 °C

Operating_supply_voltage

1.8, 2.5, 3.3 V

Specifications

http://cache.freescale.com/files/32bit/doc/data_sheet/KL33P80M48SF3.pdf?fasp=1&WT_TYPE=DataSheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation&fileExt=.pdf

Watchdog

1

Number_of_timers

5

Analog_comparators

1

Display_driver

1

Htsn

8542310001

Eccn

EAR99

Device_core

ARM Cortex M0+

Data_bus_width

32 Bit

Country_of_origin

Malaysia

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/UART

Number_of_programmable_i_os

70

Max_speed

48 MHz

Msl_level

3

Mounting

Surface Mount

Min_operating_supply_voltage

1.71 V

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Matte Tin

Lcd_segments

176, 252, 320

Артикул: MKL33Z64VLK4

Описание

The KL33 series is optimized for cost-sensitive and batterypowered applications requiring low-power segment LCD. The product offers: • Low power segment LCD up to 40×8/42×6/44×4 • Embedded ROM with boot loader for flexible program upgrade • High accuracy internal voltage and clock reference • FlexIO to support any standard and customized serial peripheral emulation • Hardware CRC module • Down to 60uA/MHz in very low power run mode and 1.83uA in deep sleep mode (RAM + RTC retained)

  • Core Processor
    • ARM® Cortex®-M0+ core up to 48 MHz
  • Memories
    • 32/64 KB program flash memory
    • 4/8 KB SRAM
    • 8 KB ROM with build-in bootloader
    • 32-byte backup register
  • System
    • 4-channel asynchronous DMA controller
    • Watchdog
    • Low-leakage wakeup unit
    • Two-pin Serial Wire Debug (SWD) programming and debug interface
    • Micro Trace Buffer
    • Bit manipulation engine
    • Interrupt controller
  • Clocks
    • 48 MHz high accuracy (up to 0.5%) internal reference clock
    • 8MHz/2MHz high accuracy (up to 3%) internal reference clock
    • 1KHz reference clock active under all low-power modes (except VLLS0)
    • 32–40KHz and 3–32MHz crystal oscillator Operating Characteristics
    • Voltage range: 1.71 to 3.6 V
    • Flash write voltage range: 1.71 to 3.6 V
    • Temperature range: –40 to 105 °C
  • Peripherals
    • Segment LCD supporting up to 40×8/42×6/44×4 segments
    • One UART module supporting ISO7816, operating up to 1.5 Mbit/s
    • Two low-power UART modules supporting asynchronous operation in low-power modes
    • Two I²C modules and I²C0 supporting up to 1 Mbit/s
    • Two 16-bit SPI modules supporting up to 24 Mbit/s
    • One FlexIO module supporting emulation of additional UART, IrDA, SPI, I2C, PWM and other serial modules, etc.
    • One 16-bit 818 ksps ADC module with high accuracy internal voltage reference (Vref) and up to 20 channels
    • High-speed analog comparator containing a 6-bit DAC for programmable reference input
    • One 12-bit DAC
    • 1.2 V internal voltage reference
  • Timers
    • One 6-channel Timer/PWM module
    • Two 2-channel Timer/PWM modules
    • One low-power timer
    • Periodic interrupt timer
    • Real time clock
  • Security and Integrity
    • 80-bit unique identification number per chip
    • Advanced flash security
    • Hardware CRC module
  • I/O
    • Up to 70 general-purpose input/output pins (GPIO) and 4 high-drive pad
  • Low Power
    • Down to 60uA/MHz in very low power run mode
    • Down to 1.83uA in VLLS3 mode (RAM + RTC retained)
    • Six flexible static modes

Детали

Product_dimensions

12 x 12 x 1.4

Special_features

LCD Controller

Screening_level

Extended Industrial

Schedule_b

8542310000

Ram_size

8 KB

Program_memory_type

Flash

Program_memory_size

64 KB

Pin_count

80

Supplier_package

LQFP

Operating_temperature

-40 to 105 °C

Operating_supply_voltage

1.8, 2.5, 3.3 V

Specifications

http://cache.freescale.com/files/32bit/doc/data_sheet/KL33P80M48SF3.pdf?fasp=1&WT_TYPE=DataSheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation&fileExt=.pdf

Watchdog

1

Number_of_timers

5

Analog_comparators

1

Display_driver

1

Htsn

8542310001

Eccn

EAR99

Device_core

ARM Cortex M0+

Data_bus_width

32 Bit

Country_of_origin

Malaysia

Бренд

Instruction_set_architecture

RISC

Тип интерфейса

I2C/SPI/UART

Number_of_programmable_i_os

70

Max_speed

48 MHz

Msl_level

3

Mounting

Surface Mount

Min_operating_supply_voltage

1.71 V

Max_processing_temp

260 °C

Max_operating_supply_voltage

3.6 V

Lead_finish

Matte Tin

Lcd_segments

176, 252, 320