MCU 32-bit C2000 C28x RISC 16KB Flash 3.3V 38-Pin TSSOP

The F2802x0 Piccolo family of microcontrollers provides the power of the C28x core coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, as well as providing a high level of analog integration. An internal voltage regulator allows for single-rail operation. Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency. 

Highlights

• High-Efficiency 32-Bit CPU (TMS320C28x)
• 50-MHz and 40-MHz Devices
• Single 3.3-V Supply
• Integrated Power-on Resets and Brown-out Resets
• Two Internal Zero-pin Oscillators
• Up to 22 Multiplexed GPIO Pins
• Three 32-Bit CPU Timers
• On-Chip Flash, SARAM, OTP Memory
• Code-security Module
• Serial Port Peripherals (SCI/SPI/I²C)
• Enhanced Control Peripherals
  • Up to 3 Enhanced Pulse Width Modulator (ePWM) Modules for up to 6 Channels
  • Enhanced Capture (eCAP) Module
  • Analog-to-Digital Converter (ADC)
  • On-Chip Temperature Sensor
  • Up to 2 Comparators (280270 Only)
• 38-Pin and 48-Pin Packages

High-Efficiency 32-Bit CPU(TMS320C28x)

• 50 MHz (20-ns Cycle Time)
• 40 MHz (25-ns Cycle Time)
• 16 x 16 and 32 x 32 MAC Operations
• 16 x 16 Dual MAC
• Harvard Bus Architecture
• Atomic Operations
• Fast Interrupt Response and Processing
• Unified Memory Programming Model
• Code-Efficient (in C/C++ and Assembly)

Endianness: Little Endian

Low Device andSystem Cost:

• Single 3.3-V Supply
• No Power Sequencing Requirement
• Integrated Power-on and Brown-out Resets
• Small Packaging, as Low as 38-Pin Available
• Low Power
• No Analog Support Pins

Clocking:

• Two Internal Zero-pin Oscillators
• On-Chip Crystal Oscillator/External Clock Input
• Dynamic PLL Ratio Changes Supported
• Watchdog Timer Module
• Missing Clock Detection Circuitry

Up to 22 Individually Programmable, Multiplexed GPIO Pins With InputFiltering

Peripheral Interrupt Expansion (PIE) Block That Supports All PeripheralInterrupts

Three 32-Bit CPU Timers

Independent 16-Bit Timer in Each ePWM Module

On-Chip Memory

• Flash, SARAM, OTP, Boot ROM Available

128-Bit Security Key and Lock

• Protects Secure Memory Blocks
• Prevents Firmware Reverse Engineering

Serial Port Peripherals

• One SCI (UART) Module
• One SPI Module
• One Inter-Integrated-Circuit (I²C) Bus

Advanced Emulation Features

• Analysis and Breakpoint Functions
• Real-Time Debug via Hardware

2802x0 Packages

• 38-Pin DA Thin Shrink Small-Outline Package (TSSOP)
• 48-Pin PT Low-Profile Quad Flatpack (LQFP)