Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 16-bit MSP430 RISC 32KB Flash 2.5V/3.3V 40-Pin WQFN EP T/R, MSP430F5172IRSBT, Texas Instruments

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in less than 5 µs. The MSP430F51x2 series are microcontroller configurations with two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, a high-performance 10-bit ADC, an on-chip comparator, a three-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. The MSP430F51x1 series are microcontroller configurations with two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, an on-chip comparator, a three-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. Typical applications for these devices include analog and digital sensor systems, LED lighting, digital power supplies, motor controls, remote controls, thermostats, digital timers, and hand-held meters.

  • Low Supply-Voltage Range: 3.6 V Down to 1.8 V
  • Ultra-Low Power Consumption
    • Active Mode (AM): 180 µA/MHz
    • Standby Mode (LPM3 WDT Mode, 3 V): 1.1 µA
    • Off Mode (LPM4 RAM Retention, 3 V): 0.9 µA
    • Shutdown Mode (LPM4.5, 3 V): 0.25 µA
  • Wakeup From Standby Mode in Less Than 5 µs
  • 16-Bit RISC Architecture, Extended Memory, 40-ns Instruction Cycle Time
  • Flexible Power-Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals up to 25 MHz (XT1)
  • Hardware Multiplier Supports 32-Bit Operations
  • Three-Channel DMA
  • Up to Twelve 5-V-Tolerant Digital Push/Pull I/Os With up to 20-mA Drive Strength(1)
  • 16-Bit Timer TD0 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TD1 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TA0 With Three Capture/Compare Registers
  • Universal Serial Communication Interfaces (USCIs)
    • USCI_A0 Supports:
      • Enhanced UART Supports Automatic Baud-Rate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0 Supports:
      • I2C
      • Synchronous SPI
  • 10-Bit 200-ksps Analog-to-Digital Converter (ADC)
    • Internal Reference
    • Sample-and-Hold
    • Autoscan Feature
    • Up to Eight External Channels, Two Internal Channels, Including Temperature Sensor(1)
  • Up to 16-Channel On-Chip Comparator Including an Ultra-Low-Power Mode(1)
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Available in 40-Pin QFN (RSB), 38-Pin TSSOP (DA), and 40-Pin Die-Sized BGA (YFF) Packages

    • Характеристики

    Analog_comparators

    16
    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    40
    Product_dimensions

    5 x 5 x 0.75 mm
    Program_memory_size

    32 Kb
    Ram_size

    2 KB
    Screening_level

    Industrial
    On_chip_adc

    11-chx10-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F5132&&fileType=pdf
    Supplier_package

    WQFN EP
    Watchdog

    1
    Max_speed

    25 MHz
    Number_of_timers

    9
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    China
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    29
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    2
    SKU: MSP430F5172IRSBT

    Description

    The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in less than 5 µs. The MSP430F51x2 series are microcontroller configurations with two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, a high-performance 10-bit ADC, an on-chip comparator, a three-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. The MSP430F51x1 series are microcontroller configurations with two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, an on-chip comparator, a three-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins. Typical applications for these devices include analog and digital sensor systems, LED lighting, digital power supplies, motor controls, remote controls, thermostats, digital timers, and hand-held meters.

  • Low Supply-Voltage Range: 3.6 V Down to 1.8 V
  • Ultra-Low Power Consumption
    • Active Mode (AM): 180 µA/MHz
    • Standby Mode (LPM3 WDT Mode, 3 V): 1.1 µA
    • Off Mode (LPM4 RAM Retention, 3 V): 0.9 µA
    • Shutdown Mode (LPM4.5, 3 V): 0.25 µA
  • Wakeup From Standby Mode in Less Than 5 µs
  • 16-Bit RISC Architecture, Extended Memory, 40-ns Instruction Cycle Time
  • Flexible Power-Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals up to 25 MHz (XT1)
  • Hardware Multiplier Supports 32-Bit Operations
  • Three-Channel DMA
  • Up to Twelve 5-V-Tolerant Digital Push/Pull I/Os With up to 20-mA Drive Strength(1)
  • 16-Bit Timer TD0 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TD1 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TA0 With Three Capture/Compare Registers
  • Universal Serial Communication Interfaces (USCIs)
    • USCI_A0 Supports:
      • Enhanced UART Supports Automatic Baud-Rate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0 Supports:
      • I2C
      • Synchronous SPI
  • 10-Bit 200-ksps Analog-to-Digital Converter (ADC)
    • Internal Reference
    • Sample-and-Hold
    • Autoscan Feature
    • Up to Eight External Channels, Two Internal Channels, Including Temperature Sensor(1)
  • Up to 16-Channel On-Chip Comparator Including an Ultra-Low-Power Mode(1)
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Available in 40-Pin QFN (RSB), 38-Pin TSSOP (DA), and 40-Pin Die-Sized BGA (YFF) Packages

    • Additional information

    Analog_comparators

    16
    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    40
    Product_dimensions

    5 x 5 x 0.75 mm
    Program_memory_size

    32 Kb
    Ram_size

    2 KB
    Screening_level

    Industrial
    On_chip_adc

    11-chx10-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F5132&&fileType=pdf
    Supplier_package

    WQFN EP
    Watchdog

    1
    Max_speed

    25 MHz
    Number_of_timers

    9
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    China
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    29
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    2

    Related products