MCU 16-bit MSP430 RISC 2KB Flash 2.5V/3.3V 16-Pin VQFN EP T/R, MSP430F2013QRSATEP, Texas Instruments

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.The MSP430F2013 is an ultra-low-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. In addition, the MSP430F2013 has a built-in communication capability using synchronousprotocols (SPI or I2C) and a 16-bit sigma-delta A/D converter.Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand alone RF sensor front end is another area of application.

  • Low Supply Voltage Range 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 220 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations:
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%
    • Internal Very Low-Power Low-Frequency Oscillator
    • 32-kHz Crystal
    • External Digital Clock Source
  • 16-Bit Timer_A With Two Capture/Compare Registers
  • 16-Bit Sigma-Delta A/D Converter
    With Differential PGA Inputs and Internal Reference(2)
  • Universal Serial Interface (USI) Supporting SPI and I2C
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed,
    Programmable Code Protection by Security Fuse
  • On-Chip Emulation Logic With Spy-Bi-Wire Interface
  • 2KB + 256B Flash Memory; 128B RAM
  • Available in a 16-Pin QFN Package
  • Характеристики

    Schedule_b

    8542310000

    Number_of_timers

    1

    Operating_temperature

    -40 to 125 °C

    Pin_count

    16

    Product_dimensions

    4 x 4 x 0.9 mm

    Screening_level

    Extended

    On_chip_adc

    4-chx16-bit

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F2013-EP&&fileType=pdf

    Supplier_package

    VQFN EP

    Watchdog

    1

    Max_speed

    16 MHz

    Operating_supply_voltage

    2.5, 3.3 V

    Instruction_set_architecture

    RISC

    Бренд

    Country_of_origin

    United States

    Data_bus_width

    16 Bit

    Eccn

    EAR99

    Htsn

    8542310001

    Тип интерфейса

    I2C/SPI

    Number_of_programmable_i_os

    10

    Lead_finish

    Gold

    Max_processing_temp

    260 °C

    Mounting

    Surface Mount

    Msl_level

    2

    Артикул: MSP430F2013QRSATEP

    Описание

    The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.The MSP430F2013 is an ultra-low-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. In addition, the MSP430F2013 has a built-in communication capability using synchronousprotocols (SPI or I2C) and a 16-bit sigma-delta A/D converter.Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand alone RF sensor front end is another area of application.

  • Low Supply Voltage Range 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 220 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations:
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%
    • Internal Very Low-Power Low-Frequency Oscillator
    • 32-kHz Crystal
    • External Digital Clock Source
  • 16-Bit Timer_A With Two Capture/Compare Registers
  • 16-Bit Sigma-Delta A/D Converter
    With Differential PGA Inputs and Internal Reference(2)
  • Universal Serial Interface (USI) Supporting SPI and I2C
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed,
    Programmable Code Protection by Security Fuse
  • On-Chip Emulation Logic With Spy-Bi-Wire Interface
  • 2KB + 256B Flash Memory; 128B RAM
  • Available in a 16-Pin QFN Package
  • Детали

    Schedule_b

    8542310000

    Number_of_timers

    1

    Operating_temperature

    -40 to 125 °C

    Pin_count

    16

    Product_dimensions

    4 x 4 x 0.9 mm

    Screening_level

    Extended

    On_chip_adc

    4-chx16-bit

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F2013-EP&&fileType=pdf

    Supplier_package

    VQFN EP

    Watchdog

    1

    Max_speed

    16 MHz

    Operating_supply_voltage

    2.5, 3.3 V

    Instruction_set_architecture

    RISC

    Бренд

    Country_of_origin

    United States

    Data_bus_width

    16 Bit

    Eccn

    EAR99

    Htsn

    8542310001

    Тип интерфейса

    I2C/SPI

    Number_of_programmable_i_os

    10

    Lead_finish

    Gold

    Max_processing_temp

    260 °C

    Mounting

    Surface Mount

    Msl_level

    2