MCU 16-Bit MSP430 RISC 2.5V/3.3V 40-Pin VQFN EP T/R, MSP430FR5859IRHAT, Texas Instruments

The MSP430 ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power. The MSP430 ULP FRAM portfolio consists of a diverse set of devices featuring FRAM, the ULP 16-bit MSP430 CPU, and intelligent peripherals targeted for various applications. The ULP architecture showcases seven low-power modes, optimized to achieve extended battery life in energy-challenged applications.

  • Embedded Microcontroller
    • 16-Bit RISC Architecture up to 16-MHz Clock
    • Wide Supply Voltage Range: 1.8 V to 3.6 V (Minimum supply voltage is restricted by SVS levels.)
  • Optimized Ultra-Low-Power Modes
    • Active Mode: Approximately 100 µA/MHz
    • Standby (LPM3 With VLO): 0.4 µA (Typical)
    • Real-Time Clock (LPM3.5): 0.25 µA (Typical) (RTC is clocked by a 3.7-pF crystal.)
    • Shutdown (LPM4.5): 0.02 µA (Typical)
  • Ultra-Low-Power Ferroelectric RAM (FRAM)
    • Up to 64KB of Nonvolatile Memory
    • Ultra-Low-Power Writes
    • Fast Write at 125 ns Per Word (64KB in 4 ms)
    • Unified Memory = Program + Data + Storage in One Single Space
    • 1015 Write Cycle Endurance
    • Radiation Resistant and Nonmagnetic
  • Intelligent Digital Peripherals
    • 32-Bit Hardware Multiplier (MPY)
    • Three-Channel Internal DMA
    • Real-Time Clock (RTC) With Calendar and Alarm Functions
    • Five 16-Bit Timers With up to Seven Capture/Compare Registers Each
    • 16-Bit Cyclic Redundancy Checker (CRC)
  • High-Performance Analog
    • 16-Channel Analog Comparator
    • 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input Channels
    • Multifunction Input/Output Ports
      • All Pins Support Capacitive Touch Capability With No Need for External Components
      • Accessible Bit-, Byte-, and Word-Wise (in Pairs)
      • Edge-Selectable Wake From LPM on All Ports
      • Programmable Pullup and Pulldown on All Ports
    • Code Security and Encryption
      • Random Number Seed for Random Number Generation Algorithms
    • Enhanced Serial Communication
      • eUSCI_A0 and eUSCI_A1 Support
        • UART With Automatic Baud-Rate Detection
        • IrDA Encode and Decode
        • SPI at Rates up to 10 Mbps
      • eUSCI_B0 Supports
        • I2C With Multiple Slave Addressing
        • SPI at Rates up to 8 Mbps
      • Hardware UART and I2C Bootstrap Loader (BSL)
    • Flexible Clock System
      • Fixed-Frequency DCO With 10 Selectable Factory-Trimmed Frequencies
      • Low-Power Low-Frequency Internal Clock Source (VLO)
      • 32-kHz Crystals (LFXT)
      • High-Frequency Crystals (HFXT)
    • Development Tools and Software
      • Free Professional Development Environments With EnergyTrace++ Technology
      • Development Kit (MSP-TS430RGZ48C)
    • Характеристики

      Analog_comparators

      1

      Schedule_b

      8542310000

      Operating_supply_voltage

      2.5, 3.3 V

      Operating_temperature

      -40 to 85 °C

      Pin_count

      40

      Product_dimensions

      6 x 6 x 0.95(Max)

      Screening_level

      Industrial

      On_chip_adc

      16-chx12-bit

      Specifications

      http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430FR5847&&fileType=pdf

      Supplier_package

      VQFN EP

      Watchdog

      1

      Max_speed

      16 MHz

      Number_of_timers

      5

      Бренд

      Instruction_set_architecture

      RISC

      Data_bus_width

      16 Bit

      Device_core

      MSP430

      Eccn

      5A992.C

      Htsn

      8542310001

      Тип интерфейса

      I2C/IrDA/LIN/SPI/UART

      Number_of_programmable_i_os

      33

      Lead_finish

      Gold Over Nickel Palladium

      Max_processing_temp

      260 °C

      Mounting

      Surface Mount

      Msl_level

      3

      SKU: MSP430FR5859IRHAT

      Description

      The MSP430 ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing innovators to increase performance at lowered energy budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash at much lower power. The MSP430 ULP FRAM portfolio consists of a diverse set of devices featuring FRAM, the ULP 16-bit MSP430 CPU, and intelligent peripherals targeted for various applications. The ULP architecture showcases seven low-power modes, optimized to achieve extended battery life in energy-challenged applications.

    • Embedded Microcontroller
      • 16-Bit RISC Architecture up to 16-MHz Clock
      • Wide Supply Voltage Range: 1.8 V to 3.6 V (Minimum supply voltage is restricted by SVS levels.)
    • Optimized Ultra-Low-Power Modes
      • Active Mode: Approximately 100 µA/MHz
      • Standby (LPM3 With VLO): 0.4 µA (Typical)
      • Real-Time Clock (LPM3.5): 0.25 µA (Typical) (RTC is clocked by a 3.7-pF crystal.)
      • Shutdown (LPM4.5): 0.02 µA (Typical)
    • Ultra-Low-Power Ferroelectric RAM (FRAM)
      • Up to 64KB of Nonvolatile Memory
      • Ultra-Low-Power Writes
      • Fast Write at 125 ns Per Word (64KB in 4 ms)
      • Unified Memory = Program + Data + Storage in One Single Space
      • 1015 Write Cycle Endurance
      • Radiation Resistant and Nonmagnetic
    • Intelligent Digital Peripherals
      • 32-Bit Hardware Multiplier (MPY)
      • Three-Channel Internal DMA
      • Real-Time Clock (RTC) With Calendar and Alarm Functions
      • Five 16-Bit Timers With up to Seven Capture/Compare Registers Each
      • 16-Bit Cyclic Redundancy Checker (CRC)
    • High-Performance Analog
      • 16-Channel Analog Comparator
      • 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input Channels
      • Multifunction Input/Output Ports
        • All Pins Support Capacitive Touch Capability With No Need for External Components
        • Accessible Bit-, Byte-, and Word-Wise (in Pairs)
        • Edge-Selectable Wake From LPM on All Ports
        • Programmable Pullup and Pulldown on All Ports
      • Code Security and Encryption
        • Random Number Seed for Random Number Generation Algorithms
      • Enhanced Serial Communication
        • eUSCI_A0 and eUSCI_A1 Support
          • UART With Automatic Baud-Rate Detection
          • IrDA Encode and Decode
          • SPI at Rates up to 10 Mbps
        • eUSCI_B0 Supports
          • I2C With Multiple Slave Addressing
          • SPI at Rates up to 8 Mbps
        • Hardware UART and I2C Bootstrap Loader (BSL)
      • Flexible Clock System
        • Fixed-Frequency DCO With 10 Selectable Factory-Trimmed Frequencies
        • Low-Power Low-Frequency Internal Clock Source (VLO)
        • 32-kHz Crystals (LFXT)
        • High-Frequency Crystals (HFXT)
      • Development Tools and Software
        • Free Professional Development Environments With EnergyTrace++ Technology
        • Development Kit (MSP-TS430RGZ48C)
      • Additional information

        Analog_comparators

        1

        Schedule_b

        8542310000

        Operating_supply_voltage

        2.5, 3.3 V

        Operating_temperature

        -40 to 85 °C

        Pin_count

        40

        Product_dimensions

        6 x 6 x 0.95(Max)

        Screening_level

        Industrial

        On_chip_adc

        16-chx12-bit

        Specifications

        http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430FR5847&&fileType=pdf

        Supplier_package

        VQFN EP

        Watchdog

        1

        Max_speed

        16 MHz

        Number_of_timers

        5

        Бренд

        Instruction_set_architecture

        RISC

        Data_bus_width

        16 Bit

        Device_core

        MSP430

        Eccn

        5A992.C

        Htsn

        8542310001

        Тип интерфейса

        I2C/IrDA/LIN/SPI/UART

        Number_of_programmable_i_os

        33

        Lead_finish

        Gold Over Nickel Palladium

        Max_processing_temp

        260 °C

        Mounting

        Surface Mount

        Msl_level

        3