Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 16-bit MSP430 RISC 192KB Flash 2.5V/3.3V 100-Pin LQFP Tray, MSP430F5637IPZ, Texas Instruments

The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in 3 µs (typical). The MSP430F563x series are microcontroller configurations with a high-performance 12-bit analog-to-digital converter (ADC), comparator, two universal serial communication interfaces (USCIs), USB 2.0, a hardware multiplier, DMA, four 16-bit timers, a real-time clock module with alarm capabilities, and up to 74 I/O pins. Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, and hand-held meters.

  • Low Supply Voltage Range: 1.8 V to 3.6 V
  • Ultralow-Power Consumption
    • Active Mode (AM):
      All System Clocks Active:
      270 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical)
    • Standby Mode (LPM3):
      Watchdog With Crystal and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.8 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
    • Shutdown RTC Mode (LPM3.5):
      Shutdown Mode, Active Real-Time Clock With Crystal:
      1.1 µA at 3.0 V (Typical)
    • Shutdown Mode (LPM4.5):
      0.3 µA at 3.0 V (Typical)
  • Wake Up From Standby Mode in 3 µs (Typical)
  • 16-Bit RISC Architecture, Extended Memory, Up to 20-MHz System Clock
  • Flexible Power Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals Up to 32 MHz (XT2)
  • Four 16-Bit Timers With 3, 5, or 7 Capture/Compare Registers
  • Two Universal Serial Communication Interfaces
    • USCI_A0 and USCI_A1 Each Support:
      Enhanced UART Supports Auto-Baudrate Detection
      IrDA Encoder and Decoder
      Synchronous SPI
    • USCI_B0 and USCI_B1 Each Support:
      I2C
      Synchronous SPI
  • Full-Speed Universal Serial Bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB Power System
    • Integrated USB-PLL
    • Eight Input and Eight Output Endpoints
  • 12-Bit Analog-to-Digital Converter (ADC) With Internal Shared Reference, Sample-and-Hold, and Autoscan Feature
  • Dual 12-Bit Digital-to-Analog Converters (DACs) With Synchronization
  • Voltage Comparator
  • Hardware Multiplier Supporting 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Six-Channel Internal DMA
  • Real-Time Clock Module With Supply Voltage Backup Switch

    • Характеристики

    Analog_comparators

    1
    Number_of_timers

    4
    Operating_supply_voltage

    2.5, 3.3 V
    Pin_count

    100
    Product_dimensions

    14 x 14 x 1.4 mm
    Program_memory_size

    192 KB
    Ram_size

    18 KB
    On_chip_adc

    16-chx12-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F5632&&fileType=pdf
    Supplier_package

    LQFP
    Watchdog

    1
    Max_speed

    20 MHz
    On_chip_dac

    2-chx12-bit
    Schedule_b

    8542310000
    Instruction_set_architecture

    RISC
    Бренд

    Country_of_origin

    United States
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    74
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    3
    SKU: MSP430F5637IPZ

    Description

    The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in 3 µs (typical). The MSP430F563x series are microcontroller configurations with a high-performance 12-bit analog-to-digital converter (ADC), comparator, two universal serial communication interfaces (USCIs), USB 2.0, a hardware multiplier, DMA, four 16-bit timers, a real-time clock module with alarm capabilities, and up to 74 I/O pins. Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, and hand-held meters.

  • Low Supply Voltage Range: 1.8 V to 3.6 V
  • Ultralow-Power Consumption
    • Active Mode (AM):
      All System Clocks Active:
      270 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical)
    • Standby Mode (LPM3):
      Watchdog With Crystal and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
      1.8 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
    • Shutdown RTC Mode (LPM3.5):
      Shutdown Mode, Active Real-Time Clock With Crystal:
      1.1 µA at 3.0 V (Typical)
    • Shutdown Mode (LPM4.5):
      0.3 µA at 3.0 V (Typical)
  • Wake Up From Standby Mode in 3 µs (Typical)
  • 16-Bit RISC Architecture, Extended Memory, Up to 20-MHz System Clock
  • Flexible Power Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals Up to 32 MHz (XT2)
  • Four 16-Bit Timers With 3, 5, or 7 Capture/Compare Registers
  • Two Universal Serial Communication Interfaces
    • USCI_A0 and USCI_A1 Each Support:
      Enhanced UART Supports Auto-Baudrate Detection
      IrDA Encoder and Decoder
      Synchronous SPI
    • USCI_B0 and USCI_B1 Each Support:
      I2C
      Synchronous SPI
  • Full-Speed Universal Serial Bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB Power System
    • Integrated USB-PLL
    • Eight Input and Eight Output Endpoints
  • 12-Bit Analog-to-Digital Converter (ADC) With Internal Shared Reference, Sample-and-Hold, and Autoscan Feature
  • Dual 12-Bit Digital-to-Analog Converters (DACs) With Synchronization
  • Voltage Comparator
  • Hardware Multiplier Supporting 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Six-Channel Internal DMA
  • Real-Time Clock Module With Supply Voltage Backup Switch

    • Additional information

    Analog_comparators

    1
    Number_of_timers

    4
    Operating_supply_voltage

    2.5, 3.3 V
    Pin_count

    100
    Product_dimensions

    14 x 14 x 1.4 mm
    Program_memory_size

    192 KB
    Ram_size

    18 KB
    On_chip_adc

    16-chx12-bit
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=MSP430F5632&&fileType=pdf
    Supplier_package

    LQFP
    Watchdog

    1
    Max_speed

    20 MHz
    On_chip_dac

    2-chx12-bit
    Schedule_b

    8542310000
    Instruction_set_architecture

    RISC
    Бренд

    Country_of_origin

    United States
    Data_bus_width

    16 Bit
    Eccn

    EAR99
    Htsn

    8542310001
    Тип интерфейса

    I2C/SPI/UART
    Number_of_programmable_i_os

    74
    Lead_finish

    Gold
    Max_operating_supply_voltage

    3.6 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    1.8 V
    Mounting

    Surface Mount
    Msl_level

    3

    Related products