Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

MCU 16-bit dsPIC30 dsPIC RISC 132KB Flash 2.5V/3.3V/5V 64-Pin TQFP Tray, DSPIC30F6011A-30I/PT, Microchip

dsPIC30F Motor Control 16-bit Digital Signal Controller. Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

High-Performance Modified RISC CPU:DSP Engine Features:Peripheral Features:Analog Features:Special Microcontroller Features:CMOS Technology:

  •     Modified Harvard architecture    C compiler optimized instruction set architecture    84 base instructions with flexible addressing modes    24-bit wide instructions, 16-bit wide data path    16 x 16-bit working register array    Up to 30 MIPs operation:            DC to 40 MHz external clock input        Internal FRC input with PLL active (4x, 8x, 16x)        4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)        10 MHz – 20 MHz oscillator input in HS/2 or HS/3 with PLL active (4x, 8x, 16x)            Peripheral and External interrupt sources    8 user selectable priority levels for each interrupt    4 processor exceptions and software traps    Primary and Alternate interrupt Vector Tables    Modulo and Bit-Reversed Addressing modes    Two, 40-bit wide accumulators with optional saturation logic    17-bit x 17-bit single cycle hardware fractional/ integer multiplier    Single cycle Multiply-Accumulate (MAC) operation    40-stage Barrel Shifter    Dual data fetch    High current sink/source I/O pins: 25 mA/25 mA    Optionally pair up 16-bit timers into 32-bit timer modules    3-wire SPI™ modules (supports 4 Frame modes)    I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing    Addressable UART modules with FIFO buffers and selectable pins    12-bit 200 Ksps Analog-to-Digital Converter (A/D)    A/D Conversion available during Sleep and Idle    1 Sample/Hold    Multiple Conversion Sequencing Options    Enhanced Flash program memory:            10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)            Data EEPROM memory:            100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)            Self-reprogrammable under software control    Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)    Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation    Fail-Safe clock monitor operation    Detects clock failure and switches to on-chip low power RC oscillator    Programmable code protection    In-Circuit Serial Programming™ (ICSP™)    Programmable Brown-out Detection and Reset generation    Selectable Power Management modes            Sleep, Idle and Alternate Clock modes            Low power, high speed Flash technology    Wide operating voltage range (2.5V to 5.5V)    Industrial and Extended temperature ranges    Low power consumption

    • Характеристики

    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3, 5 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    64
    Product_dimensions

    10 x 10 x 1 mm
    Program_memory_size

    132 KB
    Ram_size

    6 KB
    Screening_level

    Industrial
    On_chip_adc

    16-chx12-bit
    Special_features

    CAN Controller
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS03336/MCHPS03336-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    TQFP
    Max_speed

    30 MHz
    Number_of_timers

    5
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    Thailand
    Eccn

    3A991.A.2
    Htsn

    8542310001
    Тип интерфейса

    CAN/I2C/SPI/UART
    Number_of_programmable_i_os

    52
    Lead_finish

    Matte Tin
    Max_expanded_memory_size

    64 KB
    Max_operating_supply_voltage

    5.5, 5.8 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    2.2, 2.5 V
    Mounting

    Surface Mount
    Msl_level

    1, 3
    Артикул: DSPIC30F6011A-30I/PT

    Описание

    dsPIC30F Motor Control 16-bit Digital Signal Controller. Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

    High-Performance Modified RISC CPU:DSP Engine Features:Peripheral Features:Analog Features:Special Microcontroller Features:CMOS Technology:

  •     Modified Harvard architecture    C compiler optimized instruction set architecture    84 base instructions with flexible addressing modes    24-bit wide instructions, 16-bit wide data path    16 x 16-bit working register array    Up to 30 MIPs operation:            DC to 40 MHz external clock input        Internal FRC input with PLL active (4x, 8x, 16x)        4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)        10 MHz – 20 MHz oscillator input in HS/2 or HS/3 with PLL active (4x, 8x, 16x)            Peripheral and External interrupt sources    8 user selectable priority levels for each interrupt    4 processor exceptions and software traps    Primary and Alternate interrupt Vector Tables    Modulo and Bit-Reversed Addressing modes    Two, 40-bit wide accumulators with optional saturation logic    17-bit x 17-bit single cycle hardware fractional/ integer multiplier    Single cycle Multiply-Accumulate (MAC) operation    40-stage Barrel Shifter    Dual data fetch    High current sink/source I/O pins: 25 mA/25 mA    Optionally pair up 16-bit timers into 32-bit timer modules    3-wire SPI™ modules (supports 4 Frame modes)    I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing    Addressable UART modules with FIFO buffers and selectable pins    12-bit 200 Ksps Analog-to-Digital Converter (A/D)    A/D Conversion available during Sleep and Idle    1 Sample/Hold    Multiple Conversion Sequencing Options    Enhanced Flash program memory:            10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)            Data EEPROM memory:            100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)            Self-reprogrammable under software control    Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)    Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation    Fail-Safe clock monitor operation    Detects clock failure and switches to on-chip low power RC oscillator    Programmable code protection    In-Circuit Serial Programming™ (ICSP™)    Programmable Brown-out Detection and Reset generation    Selectable Power Management modes            Sleep, Idle and Alternate Clock modes            Low power, high speed Flash technology    Wide operating voltage range (2.5V to 5.5V)    Industrial and Extended temperature ranges    Low power consumption

    • Детали

    Schedule_b

    8542310000
    Operating_supply_voltage

    2.5, 3.3, 5 V
    Operating_temperature

    -40 to 85 °C
    Pin_count

    64
    Product_dimensions

    10 x 10 x 1 mm
    Program_memory_size

    132 KB
    Ram_size

    6 KB
    Screening_level

    Industrial
    On_chip_adc

    16-chx12-bit
    Special_features

    CAN Controller
    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS03336/MCHPS03336-1.pdf?hkey=52A5661711E402568146F3353EA87419
    Supplier_package

    TQFP
    Max_speed

    30 MHz
    Number_of_timers

    5
    Бренд

    Instruction_set_architecture

    RISC
    Country_of_origin

    Thailand
    Eccn

    3A991.A.2
    Htsn

    8542310001
    Тип интерфейса

    CAN/I2C/SPI/UART
    Number_of_programmable_i_os

    52
    Lead_finish

    Matte Tin
    Max_expanded_memory_size

    64 KB
    Max_operating_supply_voltage

    5.5, 5.8 V
    Max_processing_temp

    260 °C
    Min_operating_supply_voltage

    2.2, 2.5 V
    Mounting

    Surface Mount
    Msl_level

    1, 3

    Похожие товары