Описание
The UPD78F4216A Subseries is a member of the 78K/IV Series and consists of 100-pin products intended for general-purpose applications. The 78K/IV Series has 16-bit single-chip microcontrollers and provides a high-performance CPU with functions such as access to a 1 MB memory space. The UPD78F4216A has a 128 KB mask ROM and a 8,192 bytes RAM on chip. In addition, it incorporates a high-performance timer/counter, an 8-bit A/D converter, an 8-bit D/A converter, and an independent 2-channel serial interface.The uPD784216A is based on the uPD784218A with 128 KB of mask ROM and 8,192 bytes of RAM.
- On-chip ROM correction (ìPD784218A, 784218AY Subseries only)
- Inherits the peripheral functions of the UPD78078 Subseries
- Minimum instruction execution time
- 160 ns (main system clock: fXX = 12.5 MHz operation)
- 61 µs (subsystem clock: fXT = 32.768 kHz operation)
- Instruction set suited for control applications
- Interrupt controller (4-level priority)
- Vectored interrupt servicing, macro service, and context switching
- Standby function: HALT, STOP, and IDLE modes, In the low power consumption mode: HALT and IDLE modes (subsystem clock operation)
- On-chip memory: 128 KB Mask ROM and Flash memory, 8,192 bytes RAM
- I/O pins: 86
- Software programmable pull-up resistors: 70 inputs
- LED direct drive possible: 22 outputs
- Transistor direct drive possible: 6 outputs
- Timer/counter: 16-bit timer/counter × 1 unit, 8-bit timer/counter × 6 units
- Watch timer: 1 channel, Watchdog timer: 1 channel
- Serial interfaces: UART/IOE (3-wire serial I/O): 2 channels (on-chip baud rate generator), CSI (3-wire serial I/O, multimaster compatible I2C busNote): 1 channel
- A/D converter: 8-bit resolution × 8 channels
- D/A converter: 8-bit resolution × 2 channels
- Real-time output port (by combining with the timer/counter, two stepping motors can be independently controlled)
- Clock frequency function
- Clock output function: Select from fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, and fXT
- Buzzer output function: Select from fXX/210, fXX/211, fXX/212, and fXX/213
- Power supply voltage: VDD = 1.8 to 5.5 V (mask ROM version), VDD = 1.9 to 5.5 V (flash memory version)
