MCU 16-Bit/32-Bit XC2000 C166 CISC/DSP/RISC 160KB Flash 3.3V/5V 64-Pin LQFP T/R, XC2234L20F66LRAAKXUMA1, Infineon

The XC2200L series, with the XC223xL (LQFP-64) and XC222xL (VQFN-48) derivatives, further enlarges the XC2200 microcontroller family in the low-end.

  • High-performance CPU with five-stage pipeline and MPU
    • 12.5 ns instruction cycle @ 80 MHz CPU clock (single-cycle execution)
    • One-cycle 32-bit addition and subtraction with 40-bit result
    • One-cycle multiplication (16 × 16 bit)
    • Background division (32 / 16 bit) in 21 cycles
    • One-cycle multiply-and-accumulate (MAC) instructions
    • Enhanced Boolean bit manipulation facilities
    • Zero-cycle jump execution
    • Additional instructions to support HLL and operating systems
    • Register-based design with multiple variable register banks
    • Fast context switching support with two additional local register banks
    • 16 Mbytes total linear address space for code and data
    • 1,024 Bytes on-chip special function register area (C166 Family compatible)
    • Integrated Memory Protection Unit (MPU)
  • Interrupt system with 16 priority levels providing 64 interrupt nodes
    • Selectable external inputs for interrupt generation and wake-up
    • Fastest sample-rate 12.5 ns
  • Eight-channel interrupt-driven single-cycle data transfer with Peripheral Event Controller (PEC), 24-bit pointers cover total address space
  • Clock generation from internal or external clock sources, using on-chip PLL or prescaler
  • Hardware CRC-Checker with Programmable Polynomial to Supervise On-Chip Memory Areas
  • On-chip memory modules
    • 2 Kbytes on-chip dual-port RAM (DPRAM)
    • 6 Kbytes on-chip data SRAM (DSRAM)
    • 4 Kbytes on-chip program/data SRAM (PSRAM)
    • Up to 160 Kbytes on-chip program memory (Flash memory)
    • Memory content protection through Error Correction Code (ECC) for Flash memory and through parity for RAMs
  • On-Chip Peripheral Modules
    • Synchronizable 12-bit A/D Converter with up to 19 channels, conversion time below 1 µs, optional data preprocessing (data reduction, range check), broken wire detection
    • 16-channel general purpose capture/compare unit (CC2)
    • Two capture/compare units for flexible PWM signal generation (CCU6x)
    • Multi-functional general purpose timer unit with 5 timers
    • Up to 4 serial interface channels to be used as UART, LIN, high-speed synchronous channel (SPI/QSPI), IIC bus interface (10-bit addressing, 400 kbit/s), IIS interface
    • On-chip MultiCAN interface (Rev. 2.0B active) with up to 32 message objects (Full CAN/Basic CAN) on 2 CAN nodes and gateway functionality
    • On-chip system timer and on-chip real time clock
  • Single power supply from 3.0 V to 5.5 V
  • Power reduction and wake-up modes with flexible power management
  • Programmable window watchdog timer and oscillator watchdog
  • Up to 48 general purpose I/O lines
  • On-chip bootstrap loaders

Характеристики

Schedule_b

8542310000

Number_of_timers

5

Operating_temperature

-40 to 125 °C

Pin_count

64

Product_dimensions

10 x 10 x 1.4

Program_memory_size

160 KB

Program_memory_type

Flash

Ram_size

10 KB

Screening_level

Automotive

On_chip_adc

19-chx12-bit

Special_features

CAN Controller

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFN-S-A0001548081/INFN-S-A0001548081-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

LQFP

Watchdog

1

Max_speed

66 MHz

Operating_supply_voltage

3.3, 5 V

Instruction_set_architecture

CISC, DSP, RISC

Бренд

Country_of_origin

Malaysia

Data_bus_width

16, 32 Bit

Device_core

C166

Eccn

3A991.A.2

Htsn

8542310001

Тип интерфейса

CAN/I2C/I2S/LIN/SPI/UART

Number_of_programmable_i_os

49

Lead_finish

Tin

Max_expanded_memory_size

16 MB

Max_operating_supply_voltage

4.5, 5.5 V

Max_power_dissipation

700 mW

Min_operating_supply_voltage

3, 4.5 V

Mounting

Surface Mount

Msl_level

3

Артикул: XC2234L20F66LRAAKXUMA1

Описание

The XC2200L series, with the XC223xL (LQFP-64) and XC222xL (VQFN-48) derivatives, further enlarges the XC2200 microcontroller family in the low-end.

  • High-performance CPU with five-stage pipeline and MPU
    • 12.5 ns instruction cycle @ 80 MHz CPU clock (single-cycle execution)
    • One-cycle 32-bit addition and subtraction with 40-bit result
    • One-cycle multiplication (16 × 16 bit)
    • Background division (32 / 16 bit) in 21 cycles
    • One-cycle multiply-and-accumulate (MAC) instructions
    • Enhanced Boolean bit manipulation facilities
    • Zero-cycle jump execution
    • Additional instructions to support HLL and operating systems
    • Register-based design with multiple variable register banks
    • Fast context switching support with two additional local register banks
    • 16 Mbytes total linear address space for code and data
    • 1,024 Bytes on-chip special function register area (C166 Family compatible)
    • Integrated Memory Protection Unit (MPU)
  • Interrupt system with 16 priority levels providing 64 interrupt nodes
    • Selectable external inputs for interrupt generation and wake-up
    • Fastest sample-rate 12.5 ns
  • Eight-channel interrupt-driven single-cycle data transfer with Peripheral Event Controller (PEC), 24-bit pointers cover total address space
  • Clock generation from internal or external clock sources, using on-chip PLL or prescaler
  • Hardware CRC-Checker with Programmable Polynomial to Supervise On-Chip Memory Areas
  • On-chip memory modules
    • 2 Kbytes on-chip dual-port RAM (DPRAM)
    • 6 Kbytes on-chip data SRAM (DSRAM)
    • 4 Kbytes on-chip program/data SRAM (PSRAM)
    • Up to 160 Kbytes on-chip program memory (Flash memory)
    • Memory content protection through Error Correction Code (ECC) for Flash memory and through parity for RAMs
  • On-Chip Peripheral Modules
    • Synchronizable 12-bit A/D Converter with up to 19 channels, conversion time below 1 µs, optional data preprocessing (data reduction, range check), broken wire detection
    • 16-channel general purpose capture/compare unit (CC2)
    • Two capture/compare units for flexible PWM signal generation (CCU6x)
    • Multi-functional general purpose timer unit with 5 timers
    • Up to 4 serial interface channels to be used as UART, LIN, high-speed synchronous channel (SPI/QSPI), IIC bus interface (10-bit addressing, 400 kbit/s), IIS interface
    • On-chip MultiCAN interface (Rev. 2.0B active) with up to 32 message objects (Full CAN/Basic CAN) on 2 CAN nodes and gateway functionality
    • On-chip system timer and on-chip real time clock
  • Single power supply from 3.0 V to 5.5 V
  • Power reduction and wake-up modes with flexible power management
  • Programmable window watchdog timer and oscillator watchdog
  • Up to 48 general purpose I/O lines
  • On-chip bootstrap loaders

Детали

Schedule_b

8542310000

Number_of_timers

5

Operating_temperature

-40 to 125 °C

Pin_count

64

Product_dimensions

10 x 10 x 1.4

Program_memory_size

160 KB

Program_memory_type

Flash

Ram_size

10 KB

Screening_level

Automotive

On_chip_adc

19-chx12-bit

Special_features

CAN Controller

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFN-S-A0001548081/INFN-S-A0001548081-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

LQFP

Watchdog

1

Max_speed

66 MHz

Operating_supply_voltage

3.3, 5 V

Instruction_set_architecture

CISC, DSP, RISC

Бренд

Country_of_origin

Malaysia

Data_bus_width

16, 32 Bit

Device_core

C166

Eccn

3A991.A.2

Htsn

8542310001

Тип интерфейса

CAN/I2C/I2S/LIN/SPI/UART

Number_of_programmable_i_os

49

Lead_finish

Tin

Max_expanded_memory_size

16 MB

Max_operating_supply_voltage

4.5, 5.5 V

Max_power_dissipation

700 mW

Min_operating_supply_voltage

3, 4.5 V

Mounting

Surface Mount

Msl_level

3