MCU 16-bit/32-bit STR9 ARM966E-S RISC 1024KB Flash 1.8V/3.3V 144-Pin LF-BGA Tray, STR912FAZ46H6, STMicroelectronics

STR91xFA is a series of ARM-powered microcontrollers which combines a 16/32-bit ARM966E-S RISC processor core, dual-bank Flash memory, large SRAM for data or code, and a rich peripheral set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. The ARM966E-S core can perform single-cycle DSP instructions, good for speech processing, audio algorithms, and low-end imaging.

  • 16/32-bit 96 MHz ARM9E based MCU
  • ARM966E-S™ RISC core: Harvard archi-tecture, 5-stage pipeline, Tightly-Coupled Memories (SRAM and Flash)
  • STR91xFA implementation of core adds high-speed burst Flash memory interface, instruction prefetch queue, branch cache
  • Up to 96 MIPS directly from Flash memory
  • Single-cycle DSP instructions supported
  • Binary compatible with ARM7 code
  • Dual burst Flash memories, 32-bits wide
  • 256 KB/512 KB/1 MB/2 MB main Flash
  • 32 KB/128 KB secondary Flash
  • Sequential Burst operation up to 96 MHz
  • 100 K min erase cycles, 20 yr min retention
  • SRAM, 32-bits wide
  • 64K or 96K bytes, optional battery backup
  • 9 programmable DMA channels
  • Clock, reset, and supply management
  • Internal oscillator operating with external 4-25 MHz crystal
  • Internal PLL up to 96 MHz
  • Real-time clock provides calendar functions, tamper, and wake-up functions
  • Reset Supervisor monitors supply voltage, watchdog, wake-up unit, external reset
  • Brown-out monitor
  • Run, Idle, and Sleep Mode as low as 50 uA
  • Vectored interrupt controller (VIC)
  • 32 IRQ vectors, 30 interrupt pins
  • Branch cache minimizes interrupt latency
  • 8-channel, 10-bit A/D converter (ADC)
  • 0 to 3.6 V range, 0.7 usec conversion
  • 10 Communication interfaces
  • 10/100 Ethernet MAC with DMA and MII
  • USB Full-speed (12 Mbps) slave device
  • CAN interface (2.0B Active)
  • 3 16550-style UARTs with IrDA protocol
  • 2 Fast I2C, 400 kHz
  • 2 channels for SPI, SSI™, or MICROWIRE™
  • External Memory Interface (EMI)
  • 8- or 16-bit data, up to 24-bit addressing
  • Static Async modes for LQFP128
  • Additional burst synchronous modes for LFBGA144
  • Up to 80 I/O pins (muxed with interfaces)
  • 16-bit standard timers (TIM)
  • 4 timers each with 2 input capture, 2 output compare, PWM and pulse count modes
  • 3-Phase induction motor controller (IMC)
  • JTAG interface with boundary scan
  • Embedded trace module (ARM® ETM9™)
  • Характеристики

    Product_dimensions

    10 x 10 x 1.09 mm

    Special_features

    CAN Controller

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    96 KB

    Program_memory_type

    Flash

    Program_memory_size

    1024 KB

    Pin_count

    144

    Supplier_package

    LFBGA

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    1.8, 3.3 V

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0000954157/SGST-S-A0000954113-1.pdf?hkey=52A5661711E402568146F3353EA87419

    On_chip_adc

    8-chx10-bit

    Number_of_timers

    4

    Htsn

    8542310001

    Eccn

    3A991.A.2

    Device_core

    ARM966E-S

    Data_bus_width

    16, 32 Bit

    Country_of_origin

    Korea, South

    Бренд

    Instruction_set_architecture

    RISC

    Тип интерфейса

    CAN/Ethernet/I2C/SPI/UART/USB

    Number_of_programmable_i_os

    80

    Max_speed

    96 MHz

    Msl_level

    3

    Mounting

    Surface Mount

    Min_operating_supply_voltage

    1.65, 1.77, 2.5, 2.7 V

    Max_processing_temp

    260 °C

    Max_operating_supply_voltage

    2, 3.6 V

    Max_expanded_memory_size

    4 GB

    Lead_finish

    Tin/Silver/Copper

    Артикул: STR912FAZ46H6

    Описание

    STR91xFA is a series of ARM-powered microcontrollers which combines a 16/32-bit ARM966E-S RISC processor core, dual-bank Flash memory, large SRAM for data or code, and a rich peripheral set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. The ARM966E-S core can perform single-cycle DSP instructions, good for speech processing, audio algorithms, and low-end imaging.

  • 16/32-bit 96 MHz ARM9E based MCU
  • ARM966E-S™ RISC core: Harvard archi-tecture, 5-stage pipeline, Tightly-Coupled Memories (SRAM and Flash)
  • STR91xFA implementation of core adds high-speed burst Flash memory interface, instruction prefetch queue, branch cache
  • Up to 96 MIPS directly from Flash memory
  • Single-cycle DSP instructions supported
  • Binary compatible with ARM7 code
  • Dual burst Flash memories, 32-bits wide
  • 256 KB/512 KB/1 MB/2 MB main Flash
  • 32 KB/128 KB secondary Flash
  • Sequential Burst operation up to 96 MHz
  • 100 K min erase cycles, 20 yr min retention
  • SRAM, 32-bits wide
  • 64K or 96K bytes, optional battery backup
  • 9 programmable DMA channels
  • Clock, reset, and supply management
  • Internal oscillator operating with external 4-25 MHz crystal
  • Internal PLL up to 96 MHz
  • Real-time clock provides calendar functions, tamper, and wake-up functions
  • Reset Supervisor monitors supply voltage, watchdog, wake-up unit, external reset
  • Brown-out monitor
  • Run, Idle, and Sleep Mode as low as 50 uA
  • Vectored interrupt controller (VIC)
  • 32 IRQ vectors, 30 interrupt pins
  • Branch cache minimizes interrupt latency
  • 8-channel, 10-bit A/D converter (ADC)
  • 0 to 3.6 V range, 0.7 usec conversion
  • 10 Communication interfaces
  • 10/100 Ethernet MAC with DMA and MII
  • USB Full-speed (12 Mbps) slave device
  • CAN interface (2.0B Active)
  • 3 16550-style UARTs with IrDA protocol
  • 2 Fast I2C, 400 kHz
  • 2 channels for SPI, SSI™, or MICROWIRE™
  • External Memory Interface (EMI)
  • 8- or 16-bit data, up to 24-bit addressing
  • Static Async modes for LQFP128
  • Additional burst synchronous modes for LFBGA144
  • Up to 80 I/O pins (muxed with interfaces)
  • 16-bit standard timers (TIM)
  • 4 timers each with 2 input capture, 2 output compare, PWM and pulse count modes
  • 3-Phase induction motor controller (IMC)
  • JTAG interface with boundary scan
  • Embedded trace module (ARM® ETM9™)
  • Детали

    Product_dimensions

    10 x 10 x 1.09 mm

    Special_features

    CAN Controller

    Screening_level

    Industrial

    Schedule_b

    8542310000

    Ram_size

    96 KB

    Program_memory_type

    Flash

    Program_memory_size

    1024 KB

    Pin_count

    144

    Supplier_package

    LFBGA

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    1.8, 3.3 V

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0000954157/SGST-S-A0000954113-1.pdf?hkey=52A5661711E402568146F3353EA87419

    On_chip_adc

    8-chx10-bit

    Number_of_timers

    4

    Htsn

    8542310001

    Eccn

    3A991.A.2

    Device_core

    ARM966E-S

    Data_bus_width

    16, 32 Bit

    Country_of_origin

    Korea, South

    Бренд

    Instruction_set_architecture

    RISC

    Тип интерфейса

    CAN/Ethernet/I2C/SPI/UART/USB

    Number_of_programmable_i_os

    80

    Max_speed

    96 MHz

    Msl_level

    3

    Mounting

    Surface Mount

    Min_operating_supply_voltage

    1.65, 1.77, 2.5, 2.7 V

    Max_processing_temp

    260 °C

    Max_operating_supply_voltage

    2, 3.6 V

    Max_expanded_memory_size

    4 GB

    Lead_finish

    Tin/Silver/Copper