MCU 16-bit/32-bit LPC2000 ARM7TDMI-S RISC 128KB Flash 1.8V/3.3V 48-Pin HVQFN EP Tray, LPC2106FHN48/01,55, NXP

The UART are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kB of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kB, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing both large buffer size and high processing power. Various 32-bit timers, PWM channels, and 32 GPIO lines make these microcontrollers particularly suitable for industrial control and medical systems.

  • 16/32-bit ARM7TDMI-S processor.
  • 16/32/64 kB on-chip static RAM.
  • 128 kB on-chip flash program memory. 128-bit-wide interface/accelerator enables high speed 60 MHz operation.
  • The on-chip crystal oscillator should have an operating range of 1 MHz to 25 MHz.
  • Two low power modes, Idle and Power-down.
  • Processor wake-up from Power-down mode via external interrupt.
  • Individual enable/disable of peripheral functions for power optimization.
  • Dual power supply:
    • CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 8.3 %).
    • I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.
  • Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s), and SPI.
  • Up to thirty-two 5 V tolerant general purpose I/O pins in a tiny LQFP48 (7 mm × 7 mm) package.

Характеристики

Program_memory_type

Flash

Тип интерфейса

I2C/SPI/UART

Max_operating_supply_voltage

1.95, 3.6 V

Max_power_dissipation

1500 mW

Max_processing_temp

260 °C

Max_speed

60 MHz

Mounting

Surface Mount

Msl_level

2

Number_of_programmable_i_os

32

Number_of_timers

2

Min_operating_supply_voltage

1.65, 3 V

Бренд

Country_of_origin

Taiwan

Data_bus_width

16, 32 Bit

Device_core

ARM7TDMI-S

Htsn

8542310001

Supplier_package

HVQFN EP

Instruction_set_architecture

RISC

Eccn

EAR99

Watchdog

1

Operating_supply_voltage

1.8, 3.3 V

Operating_temperature

-40 to 85 °C

Pin_count

48

Product_dimensions

7.1 x 7.1 x 0.95 mm

Program_memory_size

128 KB

Ram_size

64 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGLS15639/PHGLS15639-1.pdf?hkey=52A5661711E402568146F3353EA87419

Lead_finish

Gold

Артикул: LPC2106FHN48/01,55

Описание

The UART are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kB of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kB, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing both large buffer size and high processing power. Various 32-bit timers, PWM channels, and 32 GPIO lines make these microcontrollers particularly suitable for industrial control and medical systems.

  • 16/32-bit ARM7TDMI-S processor.
  • 16/32/64 kB on-chip static RAM.
  • 128 kB on-chip flash program memory. 128-bit-wide interface/accelerator enables high speed 60 MHz operation.
  • The on-chip crystal oscillator should have an operating range of 1 MHz to 25 MHz.
  • Two low power modes, Idle and Power-down.
  • Processor wake-up from Power-down mode via external interrupt.
  • Individual enable/disable of peripheral functions for power optimization.
  • Dual power supply:
    • CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 8.3 %).
    • I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.
  • Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s), and SPI.
  • Up to thirty-two 5 V tolerant general purpose I/O pins in a tiny LQFP48 (7 mm × 7 mm) package.

Детали

Program_memory_type

Flash

Тип интерфейса

I2C/SPI/UART

Max_operating_supply_voltage

1.95, 3.6 V

Max_power_dissipation

1500 mW

Max_processing_temp

260 °C

Max_speed

60 MHz

Mounting

Surface Mount

Msl_level

2

Number_of_programmable_i_os

32

Number_of_timers

2

Min_operating_supply_voltage

1.65, 3 V

Бренд

Country_of_origin

Taiwan

Data_bus_width

16, 32 Bit

Device_core

ARM7TDMI-S

Htsn

8542310001

Supplier_package

HVQFN EP

Instruction_set_architecture

RISC

Eccn

EAR99

Watchdog

1

Operating_supply_voltage

1.8, 3.3 V

Operating_temperature

-40 to 85 °C

Pin_count

48

Product_dimensions

7.1 x 7.1 x 0.95 mm

Program_memory_size

128 KB

Ram_size

64 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGLS15639/PHGLS15639-1.pdf?hkey=52A5661711E402568146F3353EA87419

Lead_finish

Gold