Linear Charge Management Controller Li-Ion/Li-Pol 1mA 4.2V/4.35V/4.4V/4.5V 10-Pin DFN EP Tube, MCP73834-NVI/MF, Microchip

The MCP73834 is a highly advanced linear charge management controller for use in space-limited, cost sensitive applications. The MCP73834 is available in a 10-Lead, 3 mm x 3 mm DFN package or a 10-Lead, MSOP package. Along with its small physical size, the low number of external components required makes the MCP73834 ideally suited for portable applications. For applications charging from a USB port, the MCP73834 can adhere to all the specifications governing the USB power bus. The MCP73834 employs a constant current/constant voltage charge algorithm with selectable preconditioning and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V, or 4.50V, to accomodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73833/ 4 limits the charge current based on die temperature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value, and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio, or percentage, of the programmed constant current value. Preconditioning can be set to 100%. The MCP73834 is fully specified over the ambient temperature range of -40°C to +85°C.

  • Complete Linear Charge Management Controller
    • Integrated Pass Transistor
    • Integrated Current Sense
    • Integrated Reverse Discharge Protection
  • Constant Current / Constant Voltage Operation with Thermal Regulation
  • High Accuracy Preset Voltage Regulation:
    • 4.2V, 4.35V, 4.4V, or 4.5V, + 0.75%
  • Programmable Charge Current: 1A Maximum
  • Preconditioning of Deeply Depleted Cells
    • Selectable Current Ratio
    • Selectable Voltage Threshold
  • Automatic End-of-Charge Control
    • Selectable Current Threshold
    • Selectable Safety Time Period
  • Automatic Recharge
    • Selectable Voltage Threshold
  • Two Charge Status Outputs
  • Cell Temperature Monitor
  • Low-Dropout Linear Regulator Mode
  • Automatic Power-Down when Input Power Removed
  • Under Voltage Lockout
  • Numerous Selectable Options Available for a Variety of Applications
  • Available Packages:
    • DFN-10 (3 mm x 3 mm)
    • MSOP-10

Характеристики

Battery_type

Li-Ion, Li-Pol

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS02791/MCHPS02791-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

3 x 3 x 0.88 mm

Pin_count

10

Output_voltage

4.2, 4.35, 4.4, 4.5 V

Output_current

1 mA

Operating_temperature

-40 to 85 °C

Бренд

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Linear Charge Management Controller

Htsn

8542390001

Eccn

EAR99

Country_of_origin

China

Артикул: MCP73834-NVI/MF

Описание

The MCP73834 is a highly advanced linear charge management controller for use in space-limited, cost sensitive applications. The MCP73834 is available in a 10-Lead, 3 mm x 3 mm DFN package or a 10-Lead, MSOP package. Along with its small physical size, the low number of external components required makes the MCP73834 ideally suited for portable applications. For applications charging from a USB port, the MCP73834 can adhere to all the specifications governing the USB power bus. The MCP73834 employs a constant current/constant voltage charge algorithm with selectable preconditioning and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V, or 4.50V, to accomodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73833/ 4 limits the charge current based on die temperature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value, and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio, or percentage, of the programmed constant current value. Preconditioning can be set to 100%. The MCP73834 is fully specified over the ambient temperature range of -40°C to +85°C.

  • Complete Linear Charge Management Controller
    • Integrated Pass Transistor
    • Integrated Current Sense
    • Integrated Reverse Discharge Protection
  • Constant Current / Constant Voltage Operation with Thermal Regulation
  • High Accuracy Preset Voltage Regulation:
    • 4.2V, 4.35V, 4.4V, or 4.5V, + 0.75%
  • Programmable Charge Current: 1A Maximum
  • Preconditioning of Deeply Depleted Cells
    • Selectable Current Ratio
    • Selectable Voltage Threshold
  • Automatic End-of-Charge Control
    • Selectable Current Threshold
    • Selectable Safety Time Period
  • Automatic Recharge
    • Selectable Voltage Threshold
  • Two Charge Status Outputs
  • Cell Temperature Monitor
  • Low-Dropout Linear Regulator Mode
  • Automatic Power-Down when Input Power Removed
  • Under Voltage Lockout
  • Numerous Selectable Options Available for a Variety of Applications
  • Available Packages:
    • DFN-10 (3 mm x 3 mm)
    • MSOP-10

Детали

Battery_type

Li-Ion, Li-Pol

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS02791/MCHPS02791-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

3 x 3 x 0.88 mm

Pin_count

10

Output_voltage

4.2, 4.35, 4.4, 4.5 V

Output_current

1 mA

Operating_temperature

-40 to 85 °C

Бренд

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Linear Charge Management Controller

Htsn

8542390001

Eccn

EAR99

Country_of_origin

China