Light to Digital Ambient Light Sensor Digital O/P 0.008lux to 65535lux 6-Pin WSOF Embossed T/R

Digital output type ambient light sensor IC is composed of photodiodes, current-voltage converter circuit, A / D converter, control logic circuits, interface circuits and etc.It connects with I2C Bus in an equipment. ·I2C bus Interface ( f / s Mode Support, Slave address "0101001". )
·There are two outputs that peaks of a spectrum response are in visible light (Type0) and in infrared light (Type1).
·Illuminance to Digital Converter
·Very wide range and High resolution. ( 0.008 - 65535 lx )
·Low Current by power down function
·50Hz / 60Hz light noise reject-function
·Correspond to 1.8V logic input interface
·Light source dependency is little by calculating with Type0 and Type1.
    ( ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light )
·Interrupt function is available.
·Adjustable measurement result for influence of optical window.
    (It is possible to detect min. 0.001 lx, max. 100000 lx by using this function.)
·Small measurement variation (+/- 15%)
·Built in power on reset circuit.

Характеристики

Бренд ROHM
Max Proce 260
Supplier WSOF
Описание продукта 1.6 x 2.6 x 0.75 (Max)
Рабочая температура -40 to 70 °C
Schedule B 8542310000
HTSN 8542310001
Output Type Digital
Maximum O 3.6 V
Sensor Type Light to Digital
Lux Range 0.008 to 65535 lux
Minimum O 2.4 V
Peak Wavelength 840 nm
Interface Type Serial (I2C)
Maximum C 400 kHz
SKU: BH1730FVC-TR