Описание
These compact high-power connectors complement the AirMax VS high-speed signal connector offering. Contacts are flat except for minimal forming at the plug contact’s mating interfaces, which enables the use of high conductivity base metal. The unique insulator design includes openings to help air flow around the contacts to improve heat dissipation. These design features contribute to the connectors’ higher current-carrying capacity Each contact in a 1×2 connector module is designed to carry a maximum of 40 Amps, or a total of 80 Amps per module. Individual contacts in the 2×2 or 2×3 modules are designed to carry a maximum of 20 Amps. Reference the current rating chart for additional information The right-angle headers and vertical receptacles enable power connections at a backplane-to-daughter card interface. Each header offers 2, 4, or 6 individual power contacts positioned in 1×2, 2×2, or 2×3 arrays. The backplane receptacles are offered in only 2×2 and 2×3 configurations; the 2×2 receptacle mates to either the 1×2 or 2×2 header configuration. The protected backplane receptacles are UL 60950 Compliant (Finger Probe) Standard-profile 1×2 and 2×2 right-angle modules stand 14.7mm above the top surface of the PCB. The lower-profile 2×2 and 2×3 modules are designed to match the 11.5mm above-board height of AirMax VS 3-pair signal connectors. The lower vertical profile enables the power modules to be employed on the same 16.7mm slot pitch as the 3-pair signal connectors, or as a means to increase air flow in a chassis having wider slot spacing A 2×2 right-angle receptacle extends use to co-planar applications when used with a 1×2 or 2×2 right-angle header.
- Current rating to 80 amps for 1×2 or 2×2 modules
- Hard Metric (HM) Equipment Practice
- Layout compatible with ZipLine, AirMax VS andMillipacs®connector series
- 1×2, 2×2 or 2×3 contact configurations for backplane applications
- Standard-profile 1×2 and 2×2 right-angle modules extend 14.7mm above the PCB
- Lower-profile 2×2 and 2×3 modules stand only 11.5mm above board
- Options for first-mate/last-break sequencing, 2 mating lengths available
- Protected Backplane connector UL 60950 Compliant (Finger Probe)
- Options for 1×2 or 2×2 Co-planar applications
- Press-fit termination
- Compatible with lead-free processing temperatures
- Number of Contacts: 2
