Codec General Purpose 16-CH 24bit 1.8V/3.3V/5V 48-Pin QFN EP Rail, CS4207-DNZ, Cirrus Logic

The CS4207 is a highly integrated multi-channel lowpower HD Audio Codec featuring 192 kHz DACs, 96 kHz ADCs, 192 kHz S/PDIF Transmitters and Receiver, Microphone pre-amp and bias voltage, and a ground centered Headphone driver. Based on multi-bit, delta-sigma modulation, it allows infinite sample rate adjustment between 32 kHz and 192 kHz. The ADC input path allows control of a number of features. The microphone input path includes a selectable programmable-gain pre-amplifier stage and a low-noise MIC bias voltage supply. A PGA is available for line and microphone inputs and provides analog gain with soft ramp and zero cross transitions. The ADC also features an additional digital volume attenuator with soft ramp transitions. The stereo headphone amplifier is powered from a separate internally generated positive supply, with an integrated charge pump providing a negative supply. This allows a ground-centered analog output with a wide signal swing and eliminates external DC-blocking capacitors. The integrated digital audio interface receiver and transmitters utilize a 24-bit, high-performance, monolithic CMOS stereo asynchronous sample rate converter to clock align the PCM samples to/from the S/PDIF interfaces. Auto detection of non-PCM encoded data disables the sample rate conversion to preserve bit accuracy of the data. In addition to its many features, the CS4207 operates from a low-voltage analog and digital core, making this part ideal for portable systems that require low power consumption in a minimal amount of space. The CS4207 is available in a 48-pin WQFN package in both Automotive (-40°C to +105°C) and Commercial (-40°C to +85°C) grades.

  • DAC1 (Headphone)
    • 101 dB Dynamic Range (A-wtd)
    • -89 dB THD+N
  • Headphone Amplifier – GND Centered
    • Integrated Negative-voltage Regulator
    • No DC-blocking Capacitor Required
    • 50 mW Power/Channel into 16 ?
  • DAC2 & DAC3 (Line Outs)
    • 110 dB Dynamic Range (A-wtd)
    • -94 dB THD+N
    • Differential Balanced or Single-ended
  • Each DAC Supports 32 kHz to 192 kHz Sample Rates Independently.
  • Digital Volume Control
    • +6.0 dB to -57.5 dB in 0.5 dB Steps
    • Zero Cross and/or Soft Ramp Transitions
  • Independent Support of D0 and D3 Power States for Each DAC
  • Fast D3 to D0 Transition
    • Audio Playback in Less Than 50 ms

Характеристики

Бренд

Number_of_dac_outputs

2

Adc_dac_resolution

24 Bit

Number_of_adc_inputs

2

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CIRR/CIRRS01623/CIRRS01623-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Automotive

Schedule_b

8542390000

Product_dimensions

6 x 6 x 0.75 mm

Pin_count

48

Operating_temperature

-40 to 105 °C

Categoria

General Purpose

Operating_supply_voltage

1.8, 3.3, 5 V

Number_of_dacs

3

Number_of_channels_per_chip

16

Number_of_adcs

2

Mounting

Surface Mount

Htsn

8542390001

Eccn

EAR99

Country_of_origin

Taiwan

Gain_control

Programmable

Артикул: CS4207-DNZ

Описание

The CS4207 is a highly integrated multi-channel lowpower HD Audio Codec featuring 192 kHz DACs, 96 kHz ADCs, 192 kHz S/PDIF Transmitters and Receiver, Microphone pre-amp and bias voltage, and a ground centered Headphone driver. Based on multi-bit, delta-sigma modulation, it allows infinite sample rate adjustment between 32 kHz and 192 kHz. The ADC input path allows control of a number of features. The microphone input path includes a selectable programmable-gain pre-amplifier stage and a low-noise MIC bias voltage supply. A PGA is available for line and microphone inputs and provides analog gain with soft ramp and zero cross transitions. The ADC also features an additional digital volume attenuator with soft ramp transitions. The stereo headphone amplifier is powered from a separate internally generated positive supply, with an integrated charge pump providing a negative supply. This allows a ground-centered analog output with a wide signal swing and eliminates external DC-blocking capacitors. The integrated digital audio interface receiver and transmitters utilize a 24-bit, high-performance, monolithic CMOS stereo asynchronous sample rate converter to clock align the PCM samples to/from the S/PDIF interfaces. Auto detection of non-PCM encoded data disables the sample rate conversion to preserve bit accuracy of the data. In addition to its many features, the CS4207 operates from a low-voltage analog and digital core, making this part ideal for portable systems that require low power consumption in a minimal amount of space. The CS4207 is available in a 48-pin WQFN package in both Automotive (-40°C to +105°C) and Commercial (-40°C to +85°C) grades.

  • DAC1 (Headphone)
    • 101 dB Dynamic Range (A-wtd)
    • -89 dB THD+N
  • Headphone Amplifier – GND Centered
    • Integrated Negative-voltage Regulator
    • No DC-blocking Capacitor Required
    • 50 mW Power/Channel into 16 ?
  • DAC2 & DAC3 (Line Outs)
    • 110 dB Dynamic Range (A-wtd)
    • -94 dB THD+N
    • Differential Balanced or Single-ended
  • Each DAC Supports 32 kHz to 192 kHz Sample Rates Independently.
  • Digital Volume Control
    • +6.0 dB to -57.5 dB in 0.5 dB Steps
    • Zero Cross and/or Soft Ramp Transitions
  • Independent Support of D0 and D3 Power States for Each DAC
  • Fast D3 to D0 Transition
    • Audio Playback in Less Than 50 ms

Детали

Бренд

Number_of_dac_outputs

2

Adc_dac_resolution

24 Bit

Number_of_adc_inputs

2

Supplier_package

QFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/CIRR/CIRRS01623/CIRRS01623-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Automotive

Schedule_b

8542390000

Product_dimensions

6 x 6 x 0.75 mm

Pin_count

48

Operating_temperature

-40 to 105 °C

Categoria

General Purpose

Operating_supply_voltage

1.8, 3.3, 5 V

Number_of_dacs

3

Number_of_channels_per_chip

16

Number_of_adcs

2

Mounting

Surface Mount

Htsn

8542390001

Eccn

EAR99

Country_of_origin

Taiwan

Gain_control

Programmable