Charge Controller Li-Ion/Li-Pol 15mA to 500mA 4.4V 8-Pin DFN EP, MCP73831-4ADI/MC, Microchip

The MCP73831 device is highly advanced linear charge management controllers for use in space-limited, cost-sensitive applications. The MCP73831 is available in an 8-Lead, 2 mm x 3 mm DFN package or a 5-Lead, SOT-23 package. Along with their small physical size, the low number of external components required make the MCP73831 ideally suited for portable applications. For applications charging from a USB port, the MCP73831 adhere to all the specifications governing the USB power bus. The MCP73831 employ a constant-current/constantvoltage charge algorithm with selectable preconditioning and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V or 4.50V, to accommodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73831 device limit the charge current based on die temperature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio, or percentage, of the programmed constant current value. Preconditioning can be disabled. The MCP73831 devices is fully specified over the ambient temperature range of -40°C to +85°C.

  • Linear Charge Management Controller:
    • Integrated Pass Transistor
    • Integrated Current Sense
    • Reverse Discharge Protection
  • High Accuracy Preset Voltage Regulation: + 0.75%
  • Four Voltage Regulation Options:
    • 4.20V, 4.35V, 4.40V, 4.50V
  • Programmable Charge Current: 15 mA to 500 mA
  • Selectable Preconditioning:
    • 10%, 20%, 40%, or Disable
  • Selectable End-of-Charge Control:
    • 5%, 7.5%, 10%, or 20%
  • Charge Status Output
    • Tri-State Output – MCP73831
    • Open-Drain Output – MCP73832
  • Automatic Power-Down
  • Thermal Regulation
  • Temperature Range: -40°C to +85°C
  • Packaging:
    • 8-Lead, 2 mm x 3 mm DFN
    • 5-Lead, SOT-23

Характеристики

Battery_type

Li-Ion, Li-Pol

Output_current

15 to 500 mA

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS05673/MCHPS05673-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

2 x 3 x 0.88 mm

Pin_count

8

Output_voltage

4.4 V

Supplier_package

DFN EP

Бренд

Operating_temperature

-40 to 85 °C

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Charge Controller

Htsn

8542390001

Eccn

EAR99

Артикул: MCP73831-4ADI/MC

Описание

The MCP73831 device is highly advanced linear charge management controllers for use in space-limited, cost-sensitive applications. The MCP73831 is available in an 8-Lead, 2 mm x 3 mm DFN package or a 5-Lead, SOT-23 package. Along with their small physical size, the low number of external components required make the MCP73831 ideally suited for portable applications. For applications charging from a USB port, the MCP73831 adhere to all the specifications governing the USB power bus. The MCP73831 employ a constant-current/constantvoltage charge algorithm with selectable preconditioning and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V or 4.50V, to accommodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73831 device limit the charge current based on die temperature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio, or percentage, of the programmed constant current value. Preconditioning can be disabled. The MCP73831 devices is fully specified over the ambient temperature range of -40°C to +85°C.

  • Linear Charge Management Controller:
    • Integrated Pass Transistor
    • Integrated Current Sense
    • Reverse Discharge Protection
  • High Accuracy Preset Voltage Regulation: + 0.75%
  • Four Voltage Regulation Options:
    • 4.20V, 4.35V, 4.40V, 4.50V
  • Programmable Charge Current: 15 mA to 500 mA
  • Selectable Preconditioning:
    • 10%, 20%, 40%, or Disable
  • Selectable End-of-Charge Control:
    • 5%, 7.5%, 10%, or 20%
  • Charge Status Output
    • Tri-State Output – MCP73831
    • Open-Drain Output – MCP73832
  • Automatic Power-Down
  • Thermal Regulation
  • Temperature Range: -40°C to +85°C
  • Packaging:
    • 8-Lead, 2 mm x 3 mm DFN
    • 5-Lead, SOT-23

Детали

Battery_type

Li-Ion, Li-Pol

Output_current

15 to 500 mA

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MCHP/MCHPS05673/MCHPS05673-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

2 x 3 x 0.88 mm

Pin_count

8

Output_voltage

4.4 V

Supplier_package

DFN EP

Бренд

Operating_temperature

-40 to 85 °C

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Charge Controller

Htsn

8542390001

Eccn

EAR99