Battery Charger Li-Ion/Li-Pol 800mA 4.5V 10-Pin DFN EP, ISL9301IRZ, Renesas Electronics

The ISL9301 is a fully integrated high input voltage single-cell Li-ion battery charger with power path management function. This charger performs the CC/CV charge function required by Li-ion batteries. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds 10.5V OVP threshold. The 28V rating eliminates the overvoltage protection circuit required in a low-voltage charger. The charge current and the end-of-charge (EOC) current are programmable with external resistors. When the battery voltage is lower than 2.8V, the charger preconditions the battery with 16% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, the EOC indicator (CHG) will toggle to logic HIGH to indicate the end-of-charge condition. The charger will continue to charge until the user programmed timeout interval has elapsed, then the charger is terminated. The ISL9301 uses separate power paths to supply the system load and charge the battery. This feature allows the system to immediately operate with a completely discharged battery. This feature also allows the charge to terminate when the battery is full while continuing to supply the system with the input source, thus minimizing unnecessary charge/discharge cycles and improving the battery life. Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs.

  • Complete Charger for Single-Cell Li-ion/Polymer Batteries
  • Power Path Management Optimize Charge and System Currents
  • Intelligent Timeout Interval Based on Actual Charge Current
  • Integrated Disconnect Switch to Disconnect the Battery
  • 1% Charger Output Voltage Accuracy
  • Programmable Charge Current
  • Programmable End-of-Charge Current
  • Charge Current Thermal Foldback for Thermal Protection
  • Trickle Charge for Fully Discharged Batteries
  • 28V Maximum Voltage at VIN pin
  • Power Presence and Charge Indications
  • Ambient Temperature Range: -40°C to +85°C
  • 10 Ld 3×3 DFN Package
  • Pb-Free (RoHS Compliant)

Характеристики

Battery_type

Li-Ion, Li-Pol

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/RNCC/RNCC-S-A0005454684/RNCC-S-A0005454644-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

3 x 3 x 0.9 mm

Pin_count

10

Output_voltage

4.5 V

Output_current

800 mA

Operating_temperature

-40 to 85 °C

Бренд

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Battery Charger

Htsn

8542390001

Eccn

EAR99

Country_of_origin

United States

Артикул: ISL9301IRZ

Описание

The ISL9301 is a fully integrated high input voltage single-cell Li-ion battery charger with power path management function. This charger performs the CC/CV charge function required by Li-ion batteries. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds 10.5V OVP threshold. The 28V rating eliminates the overvoltage protection circuit required in a low-voltage charger. The charge current and the end-of-charge (EOC) current are programmable with external resistors. When the battery voltage is lower than 2.8V, the charger preconditions the battery with 16% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, the EOC indicator (CHG) will toggle to logic HIGH to indicate the end-of-charge condition. The charger will continue to charge until the user programmed timeout interval has elapsed, then the charger is terminated. The ISL9301 uses separate power paths to supply the system load and charge the battery. This feature allows the system to immediately operate with a completely discharged battery. This feature also allows the charge to terminate when the battery is full while continuing to supply the system with the input source, thus minimizing unnecessary charge/discharge cycles and improving the battery life. Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs.

  • Complete Charger for Single-Cell Li-ion/Polymer Batteries
  • Power Path Management Optimize Charge and System Currents
  • Intelligent Timeout Interval Based on Actual Charge Current
  • Integrated Disconnect Switch to Disconnect the Battery
  • 1% Charger Output Voltage Accuracy
  • Programmable Charge Current
  • Programmable End-of-Charge Current
  • Charge Current Thermal Foldback for Thermal Protection
  • Trickle Charge for Fully Discharged Batteries
  • 28V Maximum Voltage at VIN pin
  • Power Presence and Charge Indications
  • Ambient Temperature Range: -40°C to +85°C
  • 10 Ld 3×3 DFN Package
  • Pb-Free (RoHS Compliant)

Детали

Battery_type

Li-Ion, Li-Pol

Supplier_package

DFN EP

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/RNCC/RNCC-S-A0005454684/RNCC-S-A0005454644-1.pdf?hkey=52A5661711E402568146F3353EA87419

Screening_level

Industrial

Schedule_b

8542390000

Product_dimensions

3 x 3 x 0.9 mm

Pin_count

10

Output_voltage

4.5 V

Output_current

800 mA

Operating_temperature

-40 to 85 °C

Бренд

Msl_level

1

Mounting

Surface Mount

Max_processing_temp

260

Lead_finish

Matte Tin

Kind

Battery Charger

Htsn

8542390001

Eccn

EAR99

Country_of_origin

United States