Battery Charger Li-Ion/Li-Pol 0mA to 1000mA 4.2V 10-Pin LLP EP T/R, LM3658SD-B/NOPB, Texas Instruments

Описание

The LM3658 is a single chip charger IC designed for handheld applications.It can safely charge and maintain a single cellLi-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic.With both power sources present, the AC power source has priority. Charge current is programmed through an external resistorwhen operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USBpower, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V. The LM3658 requires few external components and integrates internal power FETs, reverse current protection and current sensing.The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature. The LM3658 operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode andmaintenance mode. Additionally, the charger IC operates as a linear regulator in “LDO mode”, when the AC wall adapter is connectedand no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurementand multiple safety timers.The LM3658 provides two open-drain outputs for LED status indication or connection to GPIOs.

Charges from either an AC wall adapter or USB power source with automatic source selection 50 mA to 1000 mA charge currents using AC wall adapter Pin-selectable USB charge currents of 100 mA or 500 mA LDO mode with 1A of source current is automatically invoked when the battery is absent and the AC wall adapter is connected Continuous battery temperature monitoring Built-in multiple safety timers Charge status indication Continuous over-current and temperature protection Near-depleted battery pre-conditioning Sleep mode with ultra low quiescent current On-board Kelvin-sensing achieves ±0.35% termination accuracy Maintenance mode with automatic recharge Thermally enhanced 3 mm x 3 mm LLP package