Description
The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications. Stereo Class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply. The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input. Stereo 24-bit Delta Sigma ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface. The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly used clocking schemes. The WM8960 operates at analog supply voltages down to 2.7V. The digital core can operate at voltages down to 1.71V to save power. The speaker supply can operate at up to 5.5V, providing 1W per channel into 8W loads. The maximum for all other supplies is 3.6V. Different sections of the chip can also be powered down under software control. The WM8960 is supplied in a very small and thin 5x5mm 32-pin QFN package, ideal for use in hand-held and portable systems.
- DAC SNR 98dB (‘A’ weighted), THD -84dB at 48kHz, 3.3V
- ADC SNR 94dB (‘A’ weighted), THD -82dB at 48kHz, 3.3V
- Pop and click suppression
- 3D Enhancement
- Stereo Class D Speaker Driver
- <0.1% THD with 1W per channel into 8? BTL speakers
- 70dB PSRR @217Hz
- 87% efficiency (1W output)
- Flexible internal switching clock
- On-chip Headphone Driver
- 40mW output power into 16? at 3.3V
- Capless mode support
- THD -75dB at 20mW, SNR 90dB with 16? load
- Microphone Interface
- Pseudo differential for high noise immunity
- Integrated low noise MICBIAS
- Programmable ALC / Limiter and Noise Gate
- Low Power Consumption
- Low Supply Voltages
- Analogue 2.7V to 3.6V (Speaker supply up to 5.5V)
- Digital core and I/O: 1.71V to 3.6V
- On-chip PLL provides flexible clocking scheme
- Sample rates: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48
- 5x5x0.9mm QFN package
