Audio Amp Speaker 4-CH Stereo 78W Class-D 100-Pin TQFP Tray, FDA450LV, STMicroelectronics

The FDA450LV is a new BCD- SOI (silicon on insulation) technology QUAD BRIDGE class D amplifier, specially intended for car radio applications.Thanks to the technology used, it is possible to integrate a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared with the standard class AB.The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio with 108 dB of dynamic range). The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently of the inductor and capacitor quality.FDA450LV is fully configurable through I²C bus interface and integrates a full diagnostics array specially intended for automotive applications.Thanks to the solutions implemented to solve the EMI problems, the device is conceived to be used in the standard single DIN car-radio box together with the tuner.The possibility to parallelize the outputs allows to drive both 2 O and 1 O speakers.Moreover FDA450LV is able to work with power supply as low as 6 V, thus supporting the most recent low voltage ("start-stop") car-makers specification.

  • Integrated 108 dB D/A conversion
  • I2S and TDM digital input (3.3/1.8 V)
  • Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
  • MOSFET power outputs
  • EMI control for FM/AM compatibility
  • EMI compliance at the CEI EN 55025 (2009-10)
  • Dithering possibility
  • Very low external component count filter
  • Output lowpass filter included in the feedback
  • Low radiation function (LRF)
  • Max. output power
  • 4 x 50 W/4 O @ 15.2 V, 1 kHz
  • High output power capability
  • 28 W/4 O 10 % THD, Vd = 14.4 V
  • Full I²C bus driving (3.3/1.8 V):
  • Independent front/rear soft play/ mute
  • I2C bus diagnostics (including DC and AC load detection, test signal internally generated)
  • Very flexible fault detection though integrated diagnostic
  • Offset detector (play or mute mode)
  • Four independent short circuit protection
  • Clipping detector
  • C-MOS compatible enable pin (3.3/5 V)
  • ESD protection
  • 6 V operation (“Start – Stop”)
  • Характеристики

    Бренд

    Input_signal_type

    Single

    Totl_harmon_distortion_noise

    0.03@10W, 0.2@10W %

    Amplifier_type

    Class-D

    Max_load_resistance

    4 Ohm

    Max_output_power_x_chan_load

    78×4@2Ohm W

    Max_input_offset_voltage

    20 mV

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS36239/SGSTS36239-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    TQFP

    Screening_level

    Automotive

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    50×4@4Ohm W

    Max_power_dissipation

    80000 mW

    Lead_finish

    Bismuth, Silver, Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    250@14.4V mA

    Operating_temperature

    -40 to 85 °C

    Output_current

    7200 mA

    Output_signal_type

    Differential

    Output_type

    4-Channel Stereo

    Pin_count

    100

    Power_supply_type

    Single

    Product_dimensions

    14 x 14 x 1

    Артикул: FDA450LV

    Описание

    The FDA450LV is a new BCD- SOI (silicon on insulation) technology QUAD BRIDGE class D amplifier, specially intended for car radio applications.Thanks to the technology used, it is possible to integrate a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared with the standard class AB.The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio with 108 dB of dynamic range). The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently of the inductor and capacitor quality.FDA450LV is fully configurable through I²C bus interface and integrates a full diagnostics array specially intended for automotive applications.Thanks to the solutions implemented to solve the EMI problems, the device is conceived to be used in the standard single DIN car-radio box together with the tuner.The possibility to parallelize the outputs allows to drive both 2 O and 1 O speakers.Moreover FDA450LV is able to work with power supply as low as 6 V, thus supporting the most recent low voltage ("start-stop") car-makers specification.

  • Integrated 108 dB D/A conversion
  • I2S and TDM digital input (3.3/1.8 V)
  • Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
  • MOSFET power outputs
  • EMI control for FM/AM compatibility
  • EMI compliance at the CEI EN 55025 (2009-10)
  • Dithering possibility
  • Very low external component count filter
  • Output lowpass filter included in the feedback
  • Low radiation function (LRF)
  • Max. output power
  • 4 x 50 W/4 O @ 15.2 V, 1 kHz
  • High output power capability
  • 28 W/4 O 10 % THD, Vd = 14.4 V
  • Full I²C bus driving (3.3/1.8 V):
  • Independent front/rear soft play/ mute
  • I2C bus diagnostics (including DC and AC load detection, test signal internally generated)
  • Very flexible fault detection though integrated diagnostic
  • Offset detector (play or mute mode)
  • Four independent short circuit protection
  • Clipping detector
  • C-MOS compatible enable pin (3.3/5 V)
  • ESD protection
  • 6 V operation (“Start – Stop”)
  • Детали

    Бренд

    Input_signal_type

    Single

    Totl_harmon_distortion_noise

    0.03@10W, 0.2@10W %

    Amplifier_type

    Class-D

    Max_load_resistance

    4 Ohm

    Max_output_power_x_chan_load

    78×4@2Ohm W

    Max_input_offset_voltage

    20 mV

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS36239/SGSTS36239-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    TQFP

    Screening_level

    Automotive

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    50×4@4Ohm W

    Max_power_dissipation

    80000 mW

    Lead_finish

    Bismuth, Silver, Tin

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    250@14.4V mA

    Operating_temperature

    -40 to 85 °C

    Output_current

    7200 mA

    Output_signal_type

    Differential

    Output_type

    4-Channel Stereo

    Pin_count

    100

    Power_supply_type

    Single

    Product_dimensions

    14 x 14 x 1