Audio Amp Speaker 3-CH Stereo 35W Class-AB 27-Pin(27+Tab) TO-220 Rail, LM4781TA/NOPB, Texas Instruments

The LM4781 is a three channel audio amplifier capable of typically delivering 35W per channel of continuous average output power into an 8? load with less than 0.5% THD+N from 20Hz – 20kHz. The LM4781 is fully protected utilizing TI"s Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry. SPiKe provides a dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the LM4781"s outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks. The advanced protection features of the LM4781 places it in a class above discrete and hybrid amplifiers.Each amplifier of the LM4781 has an independent smooth transition fade-in/out mute. The LM4781 can easily be configured for bridge or parallel operation for higher power and bi-amp solutions. 

  • SPiKe Protection
  • Low External Component Count
  • Quiet Fade-In/Out Mute Mode
  • Wide Supply Range: 20V – 70V
  • Signal-to-Noise Ratio = 93dB (ref. to PO = 1W)
  • Output Power/Channel with 0.5% THD+N, 1kHz into 8O: 35W (typ)
  • THD+N at 3 x 20W into 😯 (20Hz – 20kHz): 0.2% (typ)
  • THD+N at 3 x 20W into 6O (20Hz – 20kHz): 0.3% (typ)
  • THD+N at 3 x 20W into 4O (20Hz – 20kHz): 0.5% (typ)
  • Mute Attenuation: 110dB (typ)
  • PSRR: 85dB (min)
  • Slew Rate: 9V/µs (typ)
  • Характеристики

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    35×3@8Ohm W

    Totl_harmon_distortion_noise

    0.2@8Ohm@20W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    115 dB

    Max_input_offset_voltage

    10@±28V mV

    Min_cmrr

    75 dB

    Typ_gain_bandwidth_product

    8 MHz

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4781&&fileType=pdf

    Max_input_bias_current

    1@±28V uA

    Supplier_package

    TO-220

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    125 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    125000 mW

    Max_processing_temp

    260

    Mounting

    Through Hole

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    ±12, ±15, ±18, ±24, ±28 V

    Operating_temperature

    -20 to 85 °C

    Output_current

    4 A

    Output_signal_type

    Single-Ended

    Output_type

    3-Channel Stereo

    Pin_count

    27

    Power_supply_type

    Dual, Single

    Product_dimensions

    29.21 x 4.5 x 15.7 mm

    Артикул: LM4781TA/NOPB

    Описание

    The LM4781 is a three channel audio amplifier capable of typically delivering 35W per channel of continuous average output power into an 8? load with less than 0.5% THD+N from 20Hz – 20kHz. The LM4781 is fully protected utilizing TI"s Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry. SPiKe provides a dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the LM4781"s outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks. The advanced protection features of the LM4781 places it in a class above discrete and hybrid amplifiers.Each amplifier of the LM4781 has an independent smooth transition fade-in/out mute. The LM4781 can easily be configured for bridge or parallel operation for higher power and bi-amp solutions. 

  • SPiKe Protection
  • Low External Component Count
  • Quiet Fade-In/Out Mute Mode
  • Wide Supply Range: 20V – 70V
  • Signal-to-Noise Ratio = 93dB (ref. to PO = 1W)
  • Output Power/Channel with 0.5% THD+N, 1kHz into 8O: 35W (typ)
  • THD+N at 3 x 20W into 😯 (20Hz – 20kHz): 0.2% (typ)
  • THD+N at 3 x 20W into 6O (20Hz – 20kHz): 0.3% (typ)
  • THD+N at 3 x 20W into 4O (20Hz – 20kHz): 0.5% (typ)
  • Mute Attenuation: 110dB (typ)
  • PSRR: 85dB (min)
  • Slew Rate: 9V/µs (typ)
  • Детали

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    35×3@8Ohm W

    Totl_harmon_distortion_noise

    0.2@8Ohm@20W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    115 dB

    Max_input_offset_voltage

    10@±28V mV

    Min_cmrr

    75 dB

    Typ_gain_bandwidth_product

    8 MHz

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4781&&fileType=pdf

    Max_input_bias_current

    1@±28V uA

    Supplier_package

    TO-220

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    125 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Max_power_dissipation

    125000 mW

    Max_processing_temp

    260

    Mounting

    Through Hole

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    ±12, ±15, ±18, ±24, ±28 V

    Operating_temperature

    -20 to 85 °C

    Output_current

    4 A

    Output_signal_type

    Single-Ended

    Output_type

    3-Channel Stereo

    Pin_count

    27

    Power_supply_type

    Dual, Single

    Product_dimensions

    29.21 x 4.5 x 15.7 mm