Audio Amp Speaker 3-CH Stereo 25W Class-AB 27-Pin(27+Tab) TO-220 Rail, LM4782TA/NOPB, Texas Instruments

The LM4782 is a three channel audio amplifier capable of typically delivering 25W per channel of continuous average output power into an 8? load with less than 0.5% THD+N from 20Hz – 20kHz. The LM4782 is fully protected utilizing TI"s Self Peak Instantaneous Temperature (°Ke) (SPiKeTM) protection circuitry. SPiKe provides a dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the LM4782"s outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks. The advanced protection features of the LM4782 places it in a class above discrete and hybrid amplifiers.Each amplifier of the LM4782 has an independent smooth transition fade-in/out mute and a power conserving standby mode. The mute and standby modes can be controlled by external logic. The LM4782 can easily be configured for bridge or parallel operation for higher power and bi-amp solutions. 

  • SPiKe Protection
  • Low External Component Count
  • Quiet Fade-In/Out Mute Mode
  • Low Power Standby Mode
  • Wide Supply Range: 20V – 64V
  • Signal-to-Noise Ratio = 98dB (ref. to PO = 1W)
  • Output Power/Channel with 0.5% THD+N, 1kHz into 8O: 25W (typ)
  • THD+N at 3x15W into 😯 (20Hz – 20kHz):
    0.2% (typ)
  • THD+N at 3x15W into 6O (20Hz – 20kHz):
    0.3% (typ)
  • THD+N at 3x15W into 4O (20Hz – 20kHz):
    0.4% (typ)
  • Mute Attenuation: 115dB (typ)
  • PSRR: 85dB (min)
  • Slew Rate: 18V/µs (typ)
  • Характеристики

    Бренд

    Typical_psrr

    115 dB

    Typ_output_power_x_chan_load

    25×3@8Ohm W

    Totl_harmon_distortion_noise

    0.2@4Ohm@15W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    110 dB

    Max_input_offset_voltage

    15@±25V mV

    Min_cmrr

    80 dB

    Typ_gain_bandwidth_product

    7.5 MHz

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4782&&fileType=pdf

    Max_input_bias_current

    0.5@±25V uA

    Supplier_package

    TO-220

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Max_power_dissipation

    125000 mW

    Max_processing_temp

    260

    Mounting

    Through Hole

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    ±12, ±15, ±18, ±24, ±28 V

    Operating_temperature

    -20 to 85 °C

    Output_current

    3500 mA

    Output_signal_type

    Single-Ended

    Output_type

    3-Channel Stereo

    Pin_count

    27

    Power_supply_type

    Dual, Single

    Product_dimensions

    29.21 x 4.5 x 15.7 mm

    Артикул: LM4782TA/NOPB

    Описание

    The LM4782 is a three channel audio amplifier capable of typically delivering 25W per channel of continuous average output power into an 8? load with less than 0.5% THD+N from 20Hz – 20kHz. The LM4782 is fully protected utilizing TI"s Self Peak Instantaneous Temperature (°Ke) (SPiKeTM) protection circuitry. SPiKe provides a dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the LM4782"s outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks. The advanced protection features of the LM4782 places it in a class above discrete and hybrid amplifiers.Each amplifier of the LM4782 has an independent smooth transition fade-in/out mute and a power conserving standby mode. The mute and standby modes can be controlled by external logic. The LM4782 can easily be configured for bridge or parallel operation for higher power and bi-amp solutions. 

  • SPiKe Protection
  • Low External Component Count
  • Quiet Fade-In/Out Mute Mode
  • Low Power Standby Mode
  • Wide Supply Range: 20V – 64V
  • Signal-to-Noise Ratio = 98dB (ref. to PO = 1W)
  • Output Power/Channel with 0.5% THD+N, 1kHz into 8O: 25W (typ)
  • THD+N at 3x15W into 😯 (20Hz – 20kHz):
    0.2% (typ)
  • THD+N at 3x15W into 6O (20Hz – 20kHz):
    0.3% (typ)
  • THD+N at 3x15W into 4O (20Hz – 20kHz):
    0.4% (typ)
  • Mute Attenuation: 115dB (typ)
  • PSRR: 85dB (min)
  • Slew Rate: 18V/µs (typ)
  • Детали

    Бренд

    Typical_psrr

    115 dB

    Typ_output_power_x_chan_load

    25×3@8Ohm W

    Totl_harmon_distortion_noise

    0.2@4Ohm@15W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    110 dB

    Max_input_offset_voltage

    15@±25V mV

    Min_cmrr

    80 dB

    Typ_gain_bandwidth_product

    7.5 MHz

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4782&&fileType=pdf

    Max_input_bias_current

    0.5@±25V uA

    Supplier_package

    TO-220

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Max_power_dissipation

    125000 mW

    Max_processing_temp

    260

    Mounting

    Through Hole

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    ±12, ±15, ±18, ±24, ±28 V

    Operating_temperature

    -20 to 85 °C

    Output_current

    3500 mA

    Output_signal_type

    Single-Ended

    Output_type

    3-Channel Stereo

    Pin_count

    27

    Power_supply_type

    Dual, Single

    Product_dimensions

    29.21 x 4.5 x 15.7 mm