Audio Amp Speaker 2-CH Stereo 6W Class-D 28-Pin HTSSOP EP T/R, TPA3113D2PWPR, Texas Instruments

The TPA3113D2 is a 6-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a “virtual” voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3113D2 can drive stereo speakers as low as 4 O. The high efficiency of the TPA3113D2, 87%, eliminates the need for an external heat sink when playing music. The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature. 

  • 6-W/ch into an 😯 Loads at 10% THD+N From a 10-V Supply
  • 12-W into a 4-O Mono Load at 10% THD+N From a 10-V Supply
  • 87% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Wide Supply Voltage Range Allows Operation from 8 V to 26 V
  • Filter-Free Operation
  • SpeakerGuard Speaker Protection Includes
    Adjustable Power Limiter plus DC Protection
  • Flow Through Pin Out Facilitates Easy Board Layout
  • Robust Pin-to-Pin Short Circuit Protection and Thermal Protection
    with Auto Recovery Option
  • Excellent THD+N / Pop-Free Performance
  • Four Selectable, Fixed Gain Settings
  • Differential Inputs
  • APPLICATIONS
    • Televisions
    • Consumer Audio Equipment
    • Monitors
  • Характеристики

    Бренд

    Typ_output_power_x_chan_load

    6×2@8Ohm W

    Totl_harmon_distortion_noise

    0.07@8Ohm@3W %

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    36 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3113D2&&fileType=pdf

    Supplier_package

    HTSSOP EP

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Gold

    Max_power_dissipation

    4480 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential, Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    28

    Power_supply_type

    Single

    Product_dimensions

    9.8 x 4.5 x 1.05 mm

    Артикул: TPA3113D2PWPR

    Описание

    The TPA3113D2 is a 6-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a “virtual” voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3113D2 can drive stereo speakers as low as 4 O. The high efficiency of the TPA3113D2, 87%, eliminates the need for an external heat sink when playing music. The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature. 

  • 6-W/ch into an 😯 Loads at 10% THD+N From a 10-V Supply
  • 12-W into a 4-O Mono Load at 10% THD+N From a 10-V Supply
  • 87% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Wide Supply Voltage Range Allows Operation from 8 V to 26 V
  • Filter-Free Operation
  • SpeakerGuard Speaker Protection Includes
    Adjustable Power Limiter plus DC Protection
  • Flow Through Pin Out Facilitates Easy Board Layout
  • Robust Pin-to-Pin Short Circuit Protection and Thermal Protection
    with Auto Recovery Option
  • Excellent THD+N / Pop-Free Performance
  • Four Selectable, Fixed Gain Settings
  • Differential Inputs
  • APPLICATIONS
    • Televisions
    • Consumer Audio Equipment
    • Monitors
  • Детали

    Бренд

    Typ_output_power_x_chan_load

    6×2@8Ohm W

    Totl_harmon_distortion_noise

    0.07@8Ohm@3W %

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    36 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3113D2&&fileType=pdf

    Supplier_package

    HTSSOP EP

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Gold

    Max_power_dissipation

    4480 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential, Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    28

    Power_supply_type

    Single

    Product_dimensions

    9.8 x 4.5 x 1.05 mm