Audio Amp Speaker 1-CH Mono 3W Class-AB 8-Pin LLP EP T/R, LM4991LDX/NOPB, Texas Instruments

The LM4991 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3? load with less than 10% THD when powered by a 5V power supply (see Note below). To conserve power in portable applications, the LM4991"s micropower shutdown mode (ISD = 0.1µA, typ) is activated when VDD is applied to the SHUTDOWN pin.Boomer audio power amplifiers are designed specifically to provide high power, high fidelity audio output. They require few external components and operate on low supply voltages from 2.2V to 5.5V. Since the LM4991 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is ideally suited for low-power portable systems that require minimum volume and weight.Additional LM4991 features include thermal shutdown protection, unity-gain stability, and external gain set.Note: An LM4991LD that has been properly mounted to a circuit board will deliver 3W into 3? (at 10% THD). The other package options for the LM4991 will deliver 1.5W into 8? (at 10% THD). See thesections for further information concerning the LM4991LD and LM4991M. 

  • Available in Space-Saving WSON and SOIC Packages
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Click and Pop Circuitry Reduces Noises During Turn-On and Turn-Off Transitions
  • 2.2 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors or Gain-Setting Resistors Required
  • Unity-Gain Stable
  • Improved PSRR at 217kHz and 1kHz: 64 dB (typ)
  • PO at VDD = 5.0V, 10% THD, 1kHz
    • LM4991LD (only), 3?, 4?: 3W (typ), 2.5 W (typ)
    • All packages, 8? load: 1.5 W (typ)
  • Shutdown current: 0.1µA (typ)
  • Характеристики

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    1.5×1@8Ohm W

    Totl_harmon_distortion_noise

    0.2@8Ohm@0.5W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4991&&fileType=pdf

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    64 dB

    Input_signal_type

    Single

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm

    Артикул: LM4991LDX/NOPB

    Описание

    The LM4991 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3? load with less than 10% THD when powered by a 5V power supply (see Note below). To conserve power in portable applications, the LM4991"s micropower shutdown mode (ISD = 0.1µA, typ) is activated when VDD is applied to the SHUTDOWN pin.Boomer audio power amplifiers are designed specifically to provide high power, high fidelity audio output. They require few external components and operate on low supply voltages from 2.2V to 5.5V. Since the LM4991 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is ideally suited for low-power portable systems that require minimum volume and weight.Additional LM4991 features include thermal shutdown protection, unity-gain stability, and external gain set.Note: An LM4991LD that has been properly mounted to a circuit board will deliver 3W into 3? (at 10% THD). The other package options for the LM4991 will deliver 1.5W into 8? (at 10% THD). See thesections for further information concerning the LM4991LD and LM4991M. 

  • Available in Space-Saving WSON and SOIC Packages
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Click and Pop Circuitry Reduces Noises During Turn-On and Turn-Off Transitions
  • 2.2 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors or Gain-Setting Resistors Required
  • Unity-Gain Stable
  • Improved PSRR at 217kHz and 1kHz: 64 dB (typ)
  • PO at VDD = 5.0V, 10% THD, 1kHz
    • LM4991LD (only), 3?, 4?: 3W (typ), 2.5 W (typ)
    • All packages, 8? load: 1.5 W (typ)
  • Shutdown current: 0.1µA (typ)
  • Детали

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    1.5×1@8Ohm W

    Totl_harmon_distortion_noise

    0.2@8Ohm@0.5W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4991&&fileType=pdf

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    64 dB

    Input_signal_type

    Single

    Htsn

    8542330001

    Lead_finish

    Matte Tin

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm