Товарно-сырьевая торговая площадка

WPCS 2.1.7
Регистрация
Создать позицию

Audio Amp Speaker 1-CH Mono 2W Class-D 48-Pin BGA MICROSTAR JUNIOR T/R, TPA2000D1GQCR, Texas Instruments

The TPA2000D1 is a 2-W mono bridge-tied-load (BTL) class-D amplifier designed to drive a speaker with at least 4-O impedance. The amplifier uses TI’s third generation modulation technique, which results in improved efficiency and SNR. It also allows the device to be connected directly to the speaker without the use of the LC output filter commonly associated with class-D amplifiers (this results in EMI which must be shielded at the system level). These features make the device ideal for use in devices where high-efficiency is needed to extend battery run time. The gain of the amplifier is controlled by two input terminals, GAIN1, and GAIN0. This allows the amplifier to be configured for a gain of 6, 12, 18, and 23.5 dB. The differential input terminals are high-impedance CMOS inputs, and can be used as summing nodes. The class-D BTL amplifier includes depop circuitry to reduce the amount of turnon pop at power up, and when cycling SHUTDOWN. The TPA2000D1 is available in the 16-pin TSSOP and MicroStar Junior BGA packages that drive 2 W of continuous output power into a 4-O load. TPA2000D1 operates over an ambient temperature range of –40°C to 85°C.

  • Modulation Scheme Optimized to Operate Without a Filter
  • 4 mm × 4 mm MicroStar Junior BGA and TSSOP Package Options
  • 2 W Into a 4-O Speaker (THD+N<1%)
  • <0.2% THD+N at 1.5 W, 1 kHz, Into a 4-O Load
  • Extremely Efficient Third Generation 5-V Class-D Technology:
    • Low-Supply Current (No Filter) …4 mA
    • Low-Supply Current (Filter) . . . 7.5 mA
    • Low-Shutdown Current . . . 0.05 µA
    • Low-Noise Floor …40 µVRMS(No-Weighting Filter)
    • Maximum Efficiency Into 8 O, 75 – 85 %
    • 4 Internal Gain Settings …6 – 23.5 dB
    • PSSR . . . –77 dB
  • Integrated Depop Circuitry
  • Short-Circuit Protection (Short to Battery, Ground, and Load)
  • APPLICATIONS
    • High-Efficiency For Extended Battery Run Time

    • Характеристики

    Бренд

    Input_signal_type

    Differential
    Typ_output_power_x_chan_load

    2×1@4Ohm W
    Totl_harmon_distortion_noise

    0.2@4Ohm@1.5W %
    Amplifier_type

    Class-D
    Max_load_resistance

    4 Ohm
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA2000D1&&fileType=pdf
    Supplier_package

    BGA MICROSTAR JUNIOR
    Country_of_origin

    United States
    Eccn

    EAR99
    Функция

    Speaker
    Htsn

    8542330001
    Typical_psrr

    77 dB
    Max_power_dissipation

    774 mW
    Lead_finish

    Tin/Lead
    Max_processing_temp

    235
    Mounting

    Surface Mount
    Schedule_b

    8542330000
    Msl_level

    2A
    Operating_supply_current

    6@5V mA
    Operating_temperature

    -40 to 85 °C
    Output_signal_type

    Differential
    Output_type

    1-Channel Mono
    Pin_count

    48
    Power_supply_type

    Single
    Product_dimensions

    4 x 4 x 0.79 mm
    Артикул: TPA2000D1GQCR

    Описание

    The TPA2000D1 is a 2-W mono bridge-tied-load (BTL) class-D amplifier designed to drive a speaker with at least 4-O impedance. The amplifier uses TI’s third generation modulation technique, which results in improved efficiency and SNR. It also allows the device to be connected directly to the speaker without the use of the LC output filter commonly associated with class-D amplifiers (this results in EMI which must be shielded at the system level). These features make the device ideal for use in devices where high-efficiency is needed to extend battery run time. The gain of the amplifier is controlled by two input terminals, GAIN1, and GAIN0. This allows the amplifier to be configured for a gain of 6, 12, 18, and 23.5 dB. The differential input terminals are high-impedance CMOS inputs, and can be used as summing nodes. The class-D BTL amplifier includes depop circuitry to reduce the amount of turnon pop at power up, and when cycling SHUTDOWN. The TPA2000D1 is available in the 16-pin TSSOP and MicroStar Junior BGA packages that drive 2 W of continuous output power into a 4-O load. TPA2000D1 operates over an ambient temperature range of –40°C to 85°C.

  • Modulation Scheme Optimized to Operate Without a Filter
  • 4 mm × 4 mm MicroStar Junior BGA and TSSOP Package Options
  • 2 W Into a 4-O Speaker (THD+N<1%)
  • <0.2% THD+N at 1.5 W, 1 kHz, Into a 4-O Load
  • Extremely Efficient Third Generation 5-V Class-D Technology:
    • Low-Supply Current (No Filter) …4 mA
    • Low-Supply Current (Filter) . . . 7.5 mA
    • Low-Shutdown Current . . . 0.05 µA
    • Low-Noise Floor …40 µVRMS(No-Weighting Filter)
    • Maximum Efficiency Into 8 O, 75 – 85 %
    • 4 Internal Gain Settings …6 – 23.5 dB
    • PSSR . . . –77 dB
  • Integrated Depop Circuitry
  • Short-Circuit Protection (Short to Battery, Ground, and Load)
  • APPLICATIONS
    • High-Efficiency For Extended Battery Run Time

    • Детали

    Бренд

    Input_signal_type

    Differential
    Typ_output_power_x_chan_load

    2×1@4Ohm W
    Totl_harmon_distortion_noise

    0.2@4Ohm@1.5W %
    Amplifier_type

    Class-D
    Max_load_resistance

    4 Ohm
    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA2000D1&&fileType=pdf
    Supplier_package

    BGA MICROSTAR JUNIOR
    Country_of_origin

    United States
    Eccn

    EAR99
    Функция

    Speaker
    Htsn

    8542330001
    Typical_psrr

    77 dB
    Max_power_dissipation

    774 mW
    Lead_finish

    Tin/Lead
    Max_processing_temp

    235
    Mounting

    Surface Mount
    Schedule_b

    8542330000
    Msl_level

    2A
    Operating_supply_current

    6@5V mA
    Operating_temperature

    -40 to 85 °C
    Output_signal_type

    Differential
    Output_type

    1-Channel Mono
    Pin_count

    48
    Power_supply_type

    Single
    Product_dimensions

    4 x 4 x 0.79 mm

    Похожие товары