Audio Amp Speaker 1-CH Mono/2-CH Stereo 50W Class-D 32-Pin HTSSOP EP Tube, TPA3118D2DAP, Texas Instruments

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 O in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 O without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 O with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

  • Supports Multiple Output Configurations
    • 2 × 50 W Into a 4-O BTL Load at 21 V (TPA3116D2)
    • 2 × 30 W Into a 😯 BTL Load at 24 V (TPA3118D2)
    • 2 × 15 W Into a 😯 BTL Load at 15 V (TPA3130D2)
  • Wide Voltage Range: 4.5 V to 26 V
  • Efficient Class-D Operation
    • >90% Power Efficiency Combined With Low Idle Loss
      Greatly Reduces Heat Sink Size
    • Advanced Modulation Schemes
  • Multiple Switching Frequencies
    • AM Avoidance
    • Master and Slave Synchronization
    • Up to 1.2-MHz Switching Frequency
  • Feedback Power-Stage Architecture With High PSRR Reduces
    PSU Requirements
  • Programmable Power Limit
  • Differential and Single-Ended Inputs
  • Stereo and Mono Mode With Single-Filter Mono Configuration
  • Single Power Supply Reduces Component Count
  • Integrated Self-Protection Circuits Including Overvoltage,
    Undervoltage, Overtemperature, DC-Detect, and Short Circuit
    With Error Reporting
  • Thermally Enhanced Packages
    • DAD (32-Pin HTSSOP Pad Up)
    • DAP (32-Pin HTSSOP Pad Down)
  • –40°C to 85°C Ambient Temperature Range
  • Характеристики

    Бренд

    Lead_finish

    Gold

    Power_supply_type

    Single

    Pin_count

    32

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Input_signal_type

    Differential, Single

    Typ_output_power_x_chan_load

    50×2@4Ohm W

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3130D2&&fileType=pdf

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.1@4Ohm@25W %

    Product_dimensions

    11 x 6.2 x 1.15 mm

    Артикул: TPA3118D2DAP

    Описание

    The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 O in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 O without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 O with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

  • Supports Multiple Output Configurations
    • 2 × 50 W Into a 4-O BTL Load at 21 V (TPA3116D2)
    • 2 × 30 W Into a 😯 BTL Load at 24 V (TPA3118D2)
    • 2 × 15 W Into a 😯 BTL Load at 15 V (TPA3130D2)
  • Wide Voltage Range: 4.5 V to 26 V
  • Efficient Class-D Operation
    • >90% Power Efficiency Combined With Low Idle Loss
      Greatly Reduces Heat Sink Size
    • Advanced Modulation Schemes
  • Multiple Switching Frequencies
    • AM Avoidance
    • Master and Slave Synchronization
    • Up to 1.2-MHz Switching Frequency
  • Feedback Power-Stage Architecture With High PSRR Reduces
    PSU Requirements
  • Programmable Power Limit
  • Differential and Single-Ended Inputs
  • Stereo and Mono Mode With Single-Filter Mono Configuration
  • Single Power Supply Reduces Component Count
  • Integrated Self-Protection Circuits Including Overvoltage,
    Undervoltage, Overtemperature, DC-Detect, and Short Circuit
    With Error Reporting
  • Thermally Enhanced Packages
    • DAD (32-Pin HTSSOP Pad Up)
    • DAP (32-Pin HTSSOP Pad Down)
  • –40°C to 85°C Ambient Temperature Range
  • Детали

    Бренд

    Lead_finish

    Gold

    Power_supply_type

    Single

    Pin_count

    32

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Input_signal_type

    Differential, Single

    Typ_output_power_x_chan_load

    50×2@4Ohm W

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Taiwan

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA3130D2&&fileType=pdf

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.1@4Ohm@25W %

    Product_dimensions

    11 x 6.2 x 1.15 mm