Audio Amp Speaker 1-CH Mono/2-CH Stereo/4-CH Stereo 20W Class-D 56-Pin HTSSOP EP Tube, TAS5602DCA, Texas Instruments

The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4O.The high efficiency of the TAS5602 eliminates the need for an external heat sink.A simple interface to a digital audio PWM processor is shown below.The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions. 

  • Supports Multiple Output Configurations
    • 2×20-W into a 😯 BTL Load at 18 V
    • 4×10-W into a 4-O SE Load at 18 V
    • 2×10W (SE) + 1×20W (BTL) at 18 V
  • Thermally Enhanced Package
    • DCA (56-pin HTTSOP)
  • Wide Voltage Range: 10V—26V
    • No Separate Supply Required for Gate Drive
  • Efficient Class-D Operation Eliminates Needfor Heat Sinks
  • Closed Loop Power Stage Architecture
    • Improved PSRR Reduces Power Supply Performance Requirements
    • High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
    • Constant Output Power Over Variation in Supply Voltage
  • Single Ended Inputs
  • Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
  • APPLICATIONS
    • Flat-Panel,Rear-Projection, and CRT TV
    • Consumer Audio Applications
  • Характеристики

    Бренд

    Max_processing_temp

    260

    Power_supply_type

    Triple

    Pin_count

    56

    Output_type

    1-Channel Mono, 2-Channel Stereo, 4-Channel Stereo

    Output_signal_type

    Differential, Single-Ended

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    12, 15, 18, 24 V, 3.3

    Operating_supply_current

    50@3.3V mA

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_power_dissipation

    5500 mW

    Typ_output_power_x_chan_load

    19×2@4Ohm, 19×4@4Ohm W, 20×1@8Ohm, 20×2@8Ohm

    Lead_finish

    Gold

    Input_signal_type

    Differential

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5602&&fileType=pdf

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.04@8Ohm@10W %

    Product_dimensions

    14 x 6.1 x 1.15 mm

    Артикул: TAS5602DCA

    Описание

    The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4O.The high efficiency of the TAS5602 eliminates the need for an external heat sink.A simple interface to a digital audio PWM processor is shown below.The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions. 

  • Supports Multiple Output Configurations
    • 2×20-W into a 😯 BTL Load at 18 V
    • 4×10-W into a 4-O SE Load at 18 V
    • 2×10W (SE) + 1×20W (BTL) at 18 V
  • Thermally Enhanced Package
    • DCA (56-pin HTTSOP)
  • Wide Voltage Range: 10V—26V
    • No Separate Supply Required for Gate Drive
  • Efficient Class-D Operation Eliminates Needfor Heat Sinks
  • Closed Loop Power Stage Architecture
    • Improved PSRR Reduces Power Supply Performance Requirements
    • High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
    • Constant Output Power Over Variation in Supply Voltage
  • Single Ended Inputs
  • Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
  • APPLICATIONS
    • Flat-Panel,Rear-Projection, and CRT TV
    • Consumer Audio Applications
  • Детали

    Бренд

    Max_processing_temp

    260

    Power_supply_type

    Triple

    Pin_count

    56

    Output_type

    1-Channel Mono, 2-Channel Stereo, 4-Channel Stereo

    Output_signal_type

    Differential, Single-Ended

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    12, 15, 18, 24 V, 3.3

    Operating_supply_current

    50@3.3V mA

    Msl_level

    3

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_power_dissipation

    5500 mW

    Typ_output_power_x_chan_load

    19×2@4Ohm, 19×4@4Ohm W, 20×1@8Ohm, 20×2@8Ohm

    Lead_finish

    Gold

    Input_signal_type

    Differential

    Htsn

    8542330001

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    HTSSOP EP

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TAS5602&&fileType=pdf

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-D

    Totl_harmon_distortion_noise

    0.04@8Ohm@10W %

    Product_dimensions

    14 x 6.1 x 1.15 mm