Audio Amp Speaker 1-CH Mono/2-CH Stereo 250W Class-D 36-Pin HSOP Tube, TDF8599ATH/N2,512, NXP

The TDF8599 is a dual Bridge-Tied Load (BTL) car audio amplifier comprising an NDMOST-NDMOST output stage based on SOI BCDMOS technology. Low power dissipation enables the TDF8599 high-efficiency, class-D amplifier to be used with a smaller heat sink than those normally used with standard class-AB amplifiers. The TDF8599 can operate in either non-I2C-bus mode or I2C-bus mode. When in I2C-bus mode, DC load detection results and fault conditions can be easily read back from the device. Up to five I2C-bus addresses can be selected depending on the value of the external resistor connected to pins ADS and MOD. When pin ADS is short circuited to pin AGND, the TDF8599 operates in non-I2C-bus mode. Switching between Operating mode and Mute mode in non-I2C-bus mode is only possible using pins EN and SEL_MUTE.

  • High-efficiency
  • Low quiescent current
  • Operating voltage from 8 V to 18 V
  • Two 4 O/2 O capable BTL channels or one 1 Ω capable BTL channel
  • Differential inputs
  • Supports I2C-bus mode with five I2C-bus addresses or non-I2C-bus mode operation
  • Clip detect
  • Independent short circuit protection for each channel
  • Advanced short circuit protection for load, GND and supply
  • Load dump protection
  • Thermal foldback and thermal protection
  • DC offset protection
  • Selectable AD or BD modulation
  • Parallel channel mode for high current drive capability
  • Advanced clocking:
  • Switchable oscillator clock source: internal for Master mode or external for Slave mode
  • Spread spectrum mode
  • Phase staggering
  • Frequency hopping
  • No pop noise caused by DC output offset voltage

Характеристики

Бренд

Typ_output_power_x_chan_load

135×2@4Ohm W, 250×1@2Ohm

Totl_harmon_distortion_noise

0.02@4Ohm@1W %

Amplifier_type

Class-D

Max_load_resistance

4 Ohm

Typical_voltage_gain

26 dB

Min_cmrr

65 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGLS27967/PHGLS27967-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

HSOP

Country_of_origin

Taiwan

Eccn

EAR99

Функция

Speaker

Htsn

8542330001

Input_signal_type

Differential

Lead_finish

Tin

Max_processing_temp

245

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

3

Operating_supply_current

0.01@14.4V

Operating_temperature

-40 to 85 °C

Output_current

18 A

Output_signal_type

Differential

Output_type

1-Channel Mono, 2-Channel Stereo

Pin_count

36

Power_supply_type

Single

Product_dimensions

16 x 11.1 x 3.5 mm

Артикул: TDF8599ATH/N2,512

Описание

The TDF8599 is a dual Bridge-Tied Load (BTL) car audio amplifier comprising an NDMOST-NDMOST output stage based on SOI BCDMOS technology. Low power dissipation enables the TDF8599 high-efficiency, class-D amplifier to be used with a smaller heat sink than those normally used with standard class-AB amplifiers. The TDF8599 can operate in either non-I2C-bus mode or I2C-bus mode. When in I2C-bus mode, DC load detection results and fault conditions can be easily read back from the device. Up to five I2C-bus addresses can be selected depending on the value of the external resistor connected to pins ADS and MOD. When pin ADS is short circuited to pin AGND, the TDF8599 operates in non-I2C-bus mode. Switching between Operating mode and Mute mode in non-I2C-bus mode is only possible using pins EN and SEL_MUTE.

  • High-efficiency
  • Low quiescent current
  • Operating voltage from 8 V to 18 V
  • Two 4 O/2 O capable BTL channels or one 1 Ω capable BTL channel
  • Differential inputs
  • Supports I2C-bus mode with five I2C-bus addresses or non-I2C-bus mode operation
  • Clip detect
  • Independent short circuit protection for each channel
  • Advanced short circuit protection for load, GND and supply
  • Load dump protection
  • Thermal foldback and thermal protection
  • DC offset protection
  • Selectable AD or BD modulation
  • Parallel channel mode for high current drive capability
  • Advanced clocking:
  • Switchable oscillator clock source: internal for Master mode or external for Slave mode
  • Spread spectrum mode
  • Phase staggering
  • Frequency hopping
  • No pop noise caused by DC output offset voltage

Детали

Бренд

Typ_output_power_x_chan_load

135×2@4Ohm W, 250×1@2Ohm

Totl_harmon_distortion_noise

0.02@4Ohm@1W %

Amplifier_type

Class-D

Max_load_resistance

4 Ohm

Typical_voltage_gain

26 dB

Min_cmrr

65 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/PHGL/PHGLS27967/PHGLS27967-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

HSOP

Country_of_origin

Taiwan

Eccn

EAR99

Функция

Speaker

Htsn

8542330001

Input_signal_type

Differential

Lead_finish

Tin

Max_processing_temp

245

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

3

Operating_supply_current

0.01@14.4V

Operating_temperature

-40 to 85 °C

Output_current

18 A

Output_signal_type

Differential

Output_type

1-Channel Mono, 2-Channel Stereo

Pin_count

36

Power_supply_type

Single

Product_dimensions

16 x 11.1 x 3.5 mm