Audio Amp Speaker 1-CH Mono/2-CH Stereo 150W Class-AB 36-Pin PowerSSO Slug Up T/R, TDA7575BPDTR, STMicroelectronics

The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound.Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions.This device is equipped with a full diagnostic array that communicates the status of each speaker through the I²C bus. The TDA7575B has also the possibility of driving loads down to 1O paralleling the outputs into a single channel. It is also possible to disable the I²C and control the TDA7575B by means of the usual standby and mute pins.

  • Multipower bcd technology
  • MOSFET output power stage
  • DMOS power output
  • New high-efficiency (class AB)
  • Single-channel 1 Odriving capability
  • High output power capability 2×28 W/4O@ 14.4 V, 1 kHz, 10 % THD
  • Max. output power 2×75 W/2O,1×150 W/1O
  • Single-channel 1Odriving capability
  • 84 W undistorted power
  • Full I²C bus driving with 4 address possibilities:
  • Standby
  • Play/mute
  • Gain 12/26 dB
  • Full digital diagnostic (AC and DC loads)
  • Possibility to disable the I²C bus
  • Differential inputs
  • Full fault protection
  • DC offset detection
  • Two independent short circuit protections
  • Diagnostic on clipping detector with selectable threshold (2 % / 10 %)
  • Clipping detector as diagnostic pin when I²C bus is disabled
  • Standby/mute pins
  • ESD protection
  • Характеристики

    Бренд

    Typ_output_power_x_chan_load

    150×1@1Ohm, 75×2@2Ohm W

    Totl_harmon_distortion_noise

    0.02@4Ohm@30W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    4 Ohm

    Typical_voltage_gain

    26 dB

    Max_input_offset_voltage

    45@14.4V mV

    Min_cmrr

    56 dB

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS49738/SGSTS49738-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    PowerSSO Slug Up

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Max_power_dissipation

    86000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_temperature

    -55 to 150 °C

    Output_current

    8 A

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Pin_count

    36

    Power_supply_type

    Single

    Product_dimensions

    16 x 11.1 x 3.2 mm

    SKU: TDA7575BPDTR

    Description

    The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound.Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions.This device is equipped with a full diagnostic array that communicates the status of each speaker through the I²C bus. The TDA7575B has also the possibility of driving loads down to 1O paralleling the outputs into a single channel. It is also possible to disable the I²C and control the TDA7575B by means of the usual standby and mute pins.

  • Multipower bcd technology
  • MOSFET output power stage
  • DMOS power output
  • New high-efficiency (class AB)
  • Single-channel 1 Odriving capability
  • High output power capability 2×28 W/4O@ 14.4 V, 1 kHz, 10 % THD
  • Max. output power 2×75 W/2O,1×150 W/1O
  • Single-channel 1Odriving capability
  • 84 W undistorted power
  • Full I²C bus driving with 4 address possibilities:
  • Standby
  • Play/mute
  • Gain 12/26 dB
  • Full digital diagnostic (AC and DC loads)
  • Possibility to disable the I²C bus
  • Differential inputs
  • Full fault protection
  • DC offset detection
  • Two independent short circuit protections
  • Diagnostic on clipping detector with selectable threshold (2 % / 10 %)
  • Clipping detector as diagnostic pin when I²C bus is disabled
  • Standby/mute pins
  • ESD protection
  • Additional information

    Бренд

    Typ_output_power_x_chan_load

    150×1@1Ohm, 75×2@2Ohm W

    Totl_harmon_distortion_noise

    0.02@4Ohm@30W %

    Amplifier_type

    Class-AB

    Max_load_resistance

    4 Ohm

    Typical_voltage_gain

    26 dB

    Max_input_offset_voltage

    45@14.4V mV

    Min_cmrr

    56 dB

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS49738/SGSTS49738-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Supplier_package

    PowerSSO Slug Up

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Lead_finish

    Matte Tin

    Max_power_dissipation

    86000 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_temperature

    -55 to 150 °C

    Output_current

    8 A

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono, 2-Channel Stereo

    Pin_count

    36

    Power_supply_type

    Single

    Product_dimensions

    16 x 11.1 x 3.2 mm