Audio Amp Speaker 1-CH Mono 2.7W Class-D 16-Pin DSBGA T/R, TPA2013D1YZHR, Texas Instruments

The TPA2013D1 is a high efficiency Class-D audio power amplifier with an integrated boost converter.It drives up to 2.7 W (10% THD+N) into a 4 O speaker.With 85% typical efficiency, the TPA2013D1 helps extend battery life when playing audio.The built-in boost converter generates the voltage rail for the Class-D amplifier.This provides a louder audio output than a stand-alone amplifier connected directly to the battery.It also maintains a consistent loudness, regardless of battery voltage.Additionally, the boost converter can be used to supply external devices. The TPA2013D1 has an integrated low pass filter to improve RF rejection and reduce out-of-band noise, increasing the signal to noise ratio (SNR).A built-in PLL synchronizes the boost converter and Class-D switching frequencies, thus eliminating beat frequencies and improving audio quality.All outputs are fully protected against shorts to ground, power supply, and output-to-output shorts.

  • High Efficiency Integrated Boost Converter (Over 90% Efficiency)
  • 2.2-W into an 😯 Load from a 3.6-V Supply
  • Operates from 1.8 V to 5.5 V
  • Efficient Class-D Prolongs Battery Life
  • Independent Shutdown for Boost Converter and Class-D Amplifier
  • Differential Inputs Reduce RF Common Noise
  • Built-in INPUT Low Pass Filter Decreases RF and Out of Band Noise Sensitivity
  • Synchronized Boost and Class-D Eliminates Beat Frequencies
  • Thermal and Short-Circuit Protection
  • Available in 2.275 mm x 2.275 mm 16-ball WCSP and 4 mm x 4 mm 20-Lead QFN Packages
  • 3 Selectable Gain Settings of 2 V/V, 6 V/V, and
    10 V/V
  • APPLICATIONS
    • Cell Phones
    • PDA
    • GPS
    • Portable Electronics
  • Характеристики

    Бренд

    Input_signal_type

    Differential

    Totl_harmon_distortion_noise

    0.1@8Ohm@1W %, 10@8Ohm@2.2W

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    20 dB

    Min_cmrr

    75 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA2013D1&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    2.7×1@4Ohm W

    Max_power_dissipation

    1500 mW

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    3, 5 V

    Operating_temperature

    -40 to 85 °C

    Output_current

    1700 mA

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    16

    Power_supply_type

    Dual

    Product_dimensions

    2.3 x 2.3 x 0.48 mm

    Артикул: TPA2013D1YZHR

    Описание

    The TPA2013D1 is a high efficiency Class-D audio power amplifier with an integrated boost converter.It drives up to 2.7 W (10% THD+N) into a 4 O speaker.With 85% typical efficiency, the TPA2013D1 helps extend battery life when playing audio.The built-in boost converter generates the voltage rail for the Class-D amplifier.This provides a louder audio output than a stand-alone amplifier connected directly to the battery.It also maintains a consistent loudness, regardless of battery voltage.Additionally, the boost converter can be used to supply external devices. The TPA2013D1 has an integrated low pass filter to improve RF rejection and reduce out-of-band noise, increasing the signal to noise ratio (SNR).A built-in PLL synchronizes the boost converter and Class-D switching frequencies, thus eliminating beat frequencies and improving audio quality.All outputs are fully protected against shorts to ground, power supply, and output-to-output shorts.

  • High Efficiency Integrated Boost Converter (Over 90% Efficiency)
  • 2.2-W into an 😯 Load from a 3.6-V Supply
  • Operates from 1.8 V to 5.5 V
  • Efficient Class-D Prolongs Battery Life
  • Independent Shutdown for Boost Converter and Class-D Amplifier
  • Differential Inputs Reduce RF Common Noise
  • Built-in INPUT Low Pass Filter Decreases RF and Out of Band Noise Sensitivity
  • Synchronized Boost and Class-D Eliminates Beat Frequencies
  • Thermal and Short-Circuit Protection
  • Available in 2.275 mm x 2.275 mm 16-ball WCSP and 4 mm x 4 mm 20-Lead QFN Packages
  • 3 Selectable Gain Settings of 2 V/V, 6 V/V, and
    10 V/V
  • APPLICATIONS
    • Cell Phones
    • PDA
    • GPS
    • Portable Electronics
  • Детали

    Бренд

    Input_signal_type

    Differential

    Totl_harmon_distortion_noise

    0.1@8Ohm@1W %, 10@8Ohm@2.2W

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    20 dB

    Min_cmrr

    75 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA2013D1&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    2.7×1@4Ohm W

    Max_power_dissipation

    1500 mW

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_voltage

    3, 5 V

    Operating_temperature

    -40 to 85 °C

    Output_current

    1700 mA

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    16

    Power_supply_type

    Dual

    Product_dimensions

    2.3 x 2.3 x 0.48 mm