Audio Amp Speaker 1-CH Mono 1W Class-AB 8-Pin SOIC N T/R, LM4890MX/NOPB, Texas Instruments

The LM4890 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4890 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4890 features a low-power consumption shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4890 features an internal thermal shutdown protection mechanism. The LM4890 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.The LM4890 is unity-gain stable and can be configured by external gain-setting resistors.  

  • Available in Space-Saving Packages: DSBGA, VSSOP, SOIC, and WSON
  • Ultra Low Current Shutdown Mode
  • BTL Output Can Drive Capacitive Loads
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Thermal Shutdown Protection
  • Unity-Gain Stable
  • External Gain Configuration Capability
  • PSRR at 217Hz, VDD = 5V (Fig. 1): 62dB(typ.)
  • Power Output at 5.0V & 1% THD: 1W(typ.)
  • Power Output at 3.3V & 1% THD: 400mW(typ.)
  • Shutdown Current: 0.1µA(typ.)
  • Характеристики

    Бренд

    Input_signal_type

    Single

    Power_supply_type

    Single

    Pin_count

    8

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Matte Tin

    Htsn

    8542330001

    Typical_psrr

    66 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Malaysia

    Supplier_package

    SOIC N

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4890&&fileType=pdf

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.1@8Ohm@400mW %

    Typ_output_power_x_chan_load

    1×1@8Ohm W

    Product_dimensions

    4.9 x 3.9 x 1.45 mm

    Артикул: LM4890MX/NOPB

    Описание

    The LM4890 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4890 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4890 features a low-power consumption shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4890 features an internal thermal shutdown protection mechanism. The LM4890 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.The LM4890 is unity-gain stable and can be configured by external gain-setting resistors.  

  • Available in Space-Saving Packages: DSBGA, VSSOP, SOIC, and WSON
  • Ultra Low Current Shutdown Mode
  • BTL Output Can Drive Capacitive Loads
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2 – 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Thermal Shutdown Protection
  • Unity-Gain Stable
  • External Gain Configuration Capability
  • PSRR at 217Hz, VDD = 5V (Fig. 1): 62dB(typ.)
  • Power Output at 5.0V & 1% THD: 1W(typ.)
  • Power Output at 3.3V & 1% THD: 400mW(typ.)
  • Shutdown Current: 0.1µA(typ.)
  • Детали

    Бренд

    Input_signal_type

    Single

    Power_supply_type

    Single

    Pin_count

    8

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Matte Tin

    Htsn

    8542330001

    Typical_psrr

    66 dB

    Функция

    Speaker

    Eccn

    EAR99

    Country_of_origin

    Malaysia

    Supplier_package

    SOIC N

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4890&&fileType=pdf

    Max_load_resistance

    8 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.1@8Ohm@400mW %

    Typ_output_power_x_chan_load

    1×1@8Ohm W

    Product_dimensions

    4.9 x 3.9 x 1.45 mm