Audio Amp Speaker 1-CH Mono 10W Class-D 48-Pin HTSSOP EP Tube, TPA032D01DCA, Texas Instruments

The TPA032D01 is a monolithic power IC mono audio amplifier that operates in extremely efficient Class-D operation, using the high switching speed of power DMOS transistors to replicate the analog input signal through high-frequency switching of the output stage. This allows the TPA032D01 to be configured as a bridge-tied load (BTL) amplifier capable of delivering up to 10 W of continuous average power into a 4- O load at 0.5% THD+N from a 12-V power supply in the high-fidelity audio frequency range (20 Hz to 20 kHz). A BTL configuration eliminates the need for external coupling capacitors on the output. A chip-level shutdown control is provided to limit total supply current to 20 uA, making the device ideal for battery-powered applications. The output stage is compatible with a range of power supplies from 8 V to 14 V. Protection circuitry is included to increase device reliability: thermal and under-voltage shutdown, with a status feedback terminal for use when any error condition is encountered. The high switching frequency of the TPA032D01 allows the output filter to consist of three small capacitors and two small inductors per channel. The high switching frequency also allows for good THD+N performance. The TPA032D01 is offered in the thermally enhanced 48-pin PowerPADTM TSSOP surface-mount package (designator DCA).

  • Extremely Efficient Class-D Mono Operation
  • Drives Mono Speaker
  • 10-W BTL Output Into 4O From 12 V
  • 32-W Peak Music Power
  • Fully Specified for 12-V Operation
  • Low Shutdown Current
  • Thermally-Enhanced PowerPADTM Surface- Mount Packaging
  • Thermal and Under-Voltage Protection
  • Характеристики

    Бренд

    Lead_finish

    Gold

    Typ_output_power_x_chan_load

    10×1@4Ohm W

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    25 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA032D01&&fileType=pdf

    Supplier_package

    HTSSOP EP

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Typical_psrr

    40 dB

    Max_processing_temp

    260

    Max_power_dissipation

    5600 mW

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    35@12V mA

    Operating_supply_voltage

    12 V, 5, 9

    Operating_temperature

    -40 to 125 °C

    Output_current

    1 mA

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    48

    Power_supply_type

    Quint

    Product_dimensions

    12.5 x 6.1 x 1.15 mm

    Артикул: TPA032D01DCA

    Описание

    The TPA032D01 is a monolithic power IC mono audio amplifier that operates in extremely efficient Class-D operation, using the high switching speed of power DMOS transistors to replicate the analog input signal through high-frequency switching of the output stage. This allows the TPA032D01 to be configured as a bridge-tied load (BTL) amplifier capable of delivering up to 10 W of continuous average power into a 4- O load at 0.5% THD+N from a 12-V power supply in the high-fidelity audio frequency range (20 Hz to 20 kHz). A BTL configuration eliminates the need for external coupling capacitors on the output. A chip-level shutdown control is provided to limit total supply current to 20 uA, making the device ideal for battery-powered applications. The output stage is compatible with a range of power supplies from 8 V to 14 V. Protection circuitry is included to increase device reliability: thermal and under-voltage shutdown, with a status feedback terminal for use when any error condition is encountered. The high switching frequency of the TPA032D01 allows the output filter to consist of three small capacitors and two small inductors per channel. The high switching frequency also allows for good THD+N performance. The TPA032D01 is offered in the thermally enhanced 48-pin PowerPADTM TSSOP surface-mount package (designator DCA).

  • Extremely Efficient Class-D Mono Operation
  • Drives Mono Speaker
  • 10-W BTL Output Into 4O From 12 V
  • 32-W Peak Music Power
  • Fully Specified for 12-V Operation
  • Low Shutdown Current
  • Thermally-Enhanced PowerPADTM Surface- Mount Packaging
  • Thermal and Under-Voltage Protection
  • Детали

    Бренд

    Lead_finish

    Gold

    Typ_output_power_x_chan_load

    10×1@4Ohm W

    Amplifier_type

    Class-D

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    25 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA032D01&&fileType=pdf

    Supplier_package

    HTSSOP EP

    Country_of_origin

    Taiwan

    Eccn

    EAR99

    Функция

    Speaker

    Htsn

    8542330001

    Input_signal_type

    Differential

    Typical_psrr

    40 dB

    Max_processing_temp

    260

    Max_power_dissipation

    5600 mW

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    3

    Operating_supply_current

    35@12V mA

    Operating_supply_voltage

    12 V, 5, 9

    Operating_temperature

    -40 to 125 °C

    Output_current

    1 mA

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    48

    Power_supply_type

    Quint

    Product_dimensions

    12.5 x 6.1 x 1.15 mm