Audio Amp Speaker 1-CH Mono 1.3W Class-AB 10-Pin MSOP T/R, LM4667MM, Texas Instruments

The LM4667 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4667 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators. The LM4667 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8? transducer loads at a continuous average output of 450mW with less than 1%THD+N. Its flexible power supply requirements allow operation from 2.7V to 5.5V. The LM4667 has high efficiency with an 8? transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC"s efficiency for a 100mW power level is 74%, reaching 84% at 450mW output power.The LM4667 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND).The LM4667 has fixed selectable gain of either 6dB or 12dB. The LM4667 has short circuit protection against a short from the outputs to VDD, GND, or across the outputs.

  • No Output Filter Required for Inductive Transducers
  • Selectable Gain of 6dB or 12dB
  • Very Fast Turn on Time: 5ms (typ)
  • Minimum External Components
  • “Click and Pop” Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Short Circuit Protection
  • Space-Saving DSBGA and VSSOP Packages
  • Efficiency at 3V, 100mW into 😯 Transducer 74% (typ)
  • Efficiency at 3V, 450mW into 😯 Transducer 84% (typ)
  • Efficiency at 5V, 1W into 😯 Transducer 86% (typ)
  • Total Quiescent Power Supply Current: 3.5mA (typ)
  • Total Shutdown Power Supply Current: 0.01µA (typ)
  • Single Supply Range: 2.7V to 5.5V
  • Характеристики

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    1.3×1@8Ohm W

    Totl_harmon_distortion_noise

    0.8@8Ohm@100mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    12 dB

    Min_cmrr

    41 dB

    Specifications

    http://www.ti.com/lit/ds/symlink/lm4667.pdf

    Supplier_package

    MSOP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    65 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Tin/Lead

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    10

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.86 mm

    SKU: LM4667MM

    Description

    The LM4667 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4667 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators. The LM4667 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8? transducer loads at a continuous average output of 450mW with less than 1%THD+N. Its flexible power supply requirements allow operation from 2.7V to 5.5V. The LM4667 has high efficiency with an 8? transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC"s efficiency for a 100mW power level is 74%, reaching 84% at 450mW output power.The LM4667 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND).The LM4667 has fixed selectable gain of either 6dB or 12dB. The LM4667 has short circuit protection against a short from the outputs to VDD, GND, or across the outputs.

  • No Output Filter Required for Inductive Transducers
  • Selectable Gain of 6dB or 12dB
  • Very Fast Turn on Time: 5ms (typ)
  • Minimum External Components
  • “Click and Pop” Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Short Circuit Protection
  • Space-Saving DSBGA and VSSOP Packages
  • Efficiency at 3V, 100mW into 😯 Transducer 74% (typ)
  • Efficiency at 3V, 450mW into 😯 Transducer 84% (typ)
  • Efficiency at 5V, 1W into 😯 Transducer 86% (typ)
  • Total Quiescent Power Supply Current: 3.5mA (typ)
  • Total Shutdown Power Supply Current: 0.01µA (typ)
  • Single Supply Range: 2.7V to 5.5V
  • Additional information

    Бренд

    Функция

    Speaker

    Typ_output_power_x_chan_load

    1.3×1@8Ohm W

    Totl_harmon_distortion_noise

    0.8@8Ohm@100mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Typical_voltage_gain

    12 dB

    Min_cmrr

    41 dB

    Specifications

    http://www.ti.com/lit/ds/symlink/lm4667.pdf

    Supplier_package

    MSOP

    Country_of_origin

    United States

    Eccn

    EAR99

    Typical_psrr

    65 dB

    Input_signal_type

    Differential

    Htsn

    8542330001

    Lead_finish

    Tin/Lead

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    10

    Power_supply_type

    Single

    Product_dimensions

    3 x 3 x 0.86 mm