Audio Amp Speaker 1-CH Mono 1.1W Class-AB 8-Pin LLP EP T/R, LM4879SD/NOPB, Texas Instruments

The LM4879 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4879 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for lower-power portable applications where minimal space and power consumption are primary requirements.The LM4879 features a low-power consumption global shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4879 features an internal thermal shutdown protection mechanism. The LM4879 contains advanced pop and click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.The LM4879 is unity-gain stable and can be configured by external gain-setting resistors.  

  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Unity Gain Stable
  • Ultra Low Current Shutdown Mode
  • Fast Turn On: 80ms (typ), 110ms (max) with 1.0µF Capacitor
  • BTL Output Can Drive Capacitive Loads up to 100pF
  • Advanced Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2V – 5.0V Operation
  • Available in Space-Saving DSBGA, WSON, and VSSOP Packages
  • PSRR: 5V, 3V at 217Hz: 62dB (typ)
  • Power Output at 5V, 1%THD+N: 1.1W (typ)
  • Power Output at 3V, 1%THD+N: 350mW (typ)
  • Shutdown Current: 0.1µA (typ)
  • Характеристики

    Бренд

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    1.1×1@8Ohm W

    Totl_harmon_distortion_noise

    0.1@8Ohm@400mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4879&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Typical_psrr

    68 dB

    Lead_finish

    Matte Tin

    Input_signal_type

    Single

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm

    SKU: LM4879SD/NOPB

    Description

    The LM4879 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.1 watt of continuous average power to an 8? BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4879 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for lower-power portable applications where minimal space and power consumption are primary requirements.The LM4879 features a low-power consumption global shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4879 features an internal thermal shutdown protection mechanism. The LM4879 contains advanced pop and click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.The LM4879 is unity-gain stable and can be configured by external gain-setting resistors.  

  • No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
  • Unity Gain Stable
  • Ultra Low Current Shutdown Mode
  • Fast Turn On: 80ms (typ), 110ms (max) with 1.0µF Capacitor
  • BTL Output Can Drive Capacitive Loads up to 100pF
  • Advanced Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2V – 5.0V Operation
  • Available in Space-Saving DSBGA, WSON, and VSSOP Packages
  • PSRR: 5V, 3V at 217Hz: 62dB (typ)
  • Power Output at 5V, 1%THD+N: 1.1W (typ)
  • Power Output at 3V, 1%THD+N: 350mW (typ)
  • Shutdown Current: 0.1µA (typ)
  • Additional information

    Бренд

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    1.1×1@8Ohm W

    Totl_harmon_distortion_noise

    0.1@8Ohm@400mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    8 Ohm

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM4879&&fileType=pdf

    Supplier_package

    LLP EP

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Speaker

    Typical_psrr

    68 dB

    Lead_finish

    Matte Tin

    Input_signal_type

    Single

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    1-Channel Mono

    Pin_count

    8

    Power_supply_type

    Single

    Product_dimensions

    4 x 4 x 0.8 mm