Audio Amp Headphone/Speaker 2-CH Stereo 2W Class-AB 32-Pin TQFN EP, MAX9789AETJ+, Maxim Integrated

The MAX9789/MAX9790 combine a stereo, 2W Class AB speaker power amplifier with a stereo 100mW DirectDrive headphone amplifier in a single device. The MAX9789/MAX9790 are designed for use with the Microsoft Windows Vista operating system and are fully compliant with Microsoft"s Windows Vista specifications. The headphone amplifier features Maxim"s DirectDrive architecture that produces a ground-referenced output from a single supply to eliminate the need for large DC-blocking capacitors, as well as save cost, board space, and component height. A high +90dB PSRR and low 0.002% THD+N ensures clean, low-distortion amplification of the audio signal. Separate speaker and headphone amplifier control inputs provide independent shutdown of the speaker and headphone amplifiers, allowing speaker and headphone amplifiers to be active simultaneously, if required. The industry-leading click-and-pop suppression circuitry reduces audible transients during startup and shutdown cycles. The MAX9789 features an internal LDO that can be used as a clean power supply for a CODEC or other circuits. The LDO output voltage is set internally at 4.75V or can be adjusted between 1.21V and 4.75V using a simple resistive divider. The LDO is protected against thermal overloads and short circuits while providing 120mA of continuous output current and can be enabled independently of the audio amplifiers. By disabling the speaker and headphone amplifiers, and the LDO (for MAX9789), the MAX9789/MAX9790 enter low-power shutdown mode and draw only 0.3µA. The MAX9789/MAX9790 operate from a single 4.5V to 5.5V supply and feature thermal-overload and output short-circuit protection. Devices are specified over the -40°C to +85°C extended temperature range.

  • Microsoft Windows Vista Compliant
  • Class AB 2W Stereo BTL Speaker Amplifier
  • 100mW DirectDrive Headphone Amplifier Eliminates Costly, Bulky DC-Blocking Capacitors
  • Excellent RF Immunity
  • Integrated 120mA LDO (MAX9789)
  • High +90dB PSRR, Low 0.002% THD+N
  • Low-Power Shutdown Mode
  • Click-and-Pop Suppression
  • Short-Circuit and Thermal-Overload Protection
  • Available in 32-Pin Thin QFN (5mm x 5mm x 0.8mm) Package

Характеристики

Бренд

Typical_psrr

95 dB

Typ_output_power_x_chan_load

0.1×2@16Ohm W, 2×2@4Ohm

Totl_harmon_distortion_noise

0.002@8Ohm@1W %

Amplifier_type

Class-AB

Max_load_resistance

32 Ohm

Typical_voltage_gain

21.6 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS10636/MAXMS10636-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFN EP

Screening_level

Extended

Country_of_origin

United States

Eccn

EAR99

Функция

Headphone/Speaker

Htsn

8542330001

Input_signal_type

Single

Lead_finish

Gold

Max_power_dissipation

1990 mW

Max_processing_temp

260, 300

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

1

Operating_supply_voltage

5 V

Operating_temperature

-40 to 85 °C

Output_current

1700 mA

Output_signal_type

Differential, Single-Ended

Output_type

2-Channel Stereo

Pin_count

32

Power_supply_type

Quad

Product_dimensions

5 x 5 x 0.73 mm

Артикул: MAX9789AETJ+

Описание

The MAX9789/MAX9790 combine a stereo, 2W Class AB speaker power amplifier with a stereo 100mW DirectDrive headphone amplifier in a single device. The MAX9789/MAX9790 are designed for use with the Microsoft Windows Vista operating system and are fully compliant with Microsoft"s Windows Vista specifications. The headphone amplifier features Maxim"s DirectDrive architecture that produces a ground-referenced output from a single supply to eliminate the need for large DC-blocking capacitors, as well as save cost, board space, and component height. A high +90dB PSRR and low 0.002% THD+N ensures clean, low-distortion amplification of the audio signal. Separate speaker and headphone amplifier control inputs provide independent shutdown of the speaker and headphone amplifiers, allowing speaker and headphone amplifiers to be active simultaneously, if required. The industry-leading click-and-pop suppression circuitry reduces audible transients during startup and shutdown cycles. The MAX9789 features an internal LDO that can be used as a clean power supply for a CODEC or other circuits. The LDO output voltage is set internally at 4.75V or can be adjusted between 1.21V and 4.75V using a simple resistive divider. The LDO is protected against thermal overloads and short circuits while providing 120mA of continuous output current and can be enabled independently of the audio amplifiers. By disabling the speaker and headphone amplifiers, and the LDO (for MAX9789), the MAX9789/MAX9790 enter low-power shutdown mode and draw only 0.3µA. The MAX9789/MAX9790 operate from a single 4.5V to 5.5V supply and feature thermal-overload and output short-circuit protection. Devices are specified over the -40°C to +85°C extended temperature range.

  • Microsoft Windows Vista Compliant
  • Class AB 2W Stereo BTL Speaker Amplifier
  • 100mW DirectDrive Headphone Amplifier Eliminates Costly, Bulky DC-Blocking Capacitors
  • Excellent RF Immunity
  • Integrated 120mA LDO (MAX9789)
  • High +90dB PSRR, Low 0.002% THD+N
  • Low-Power Shutdown Mode
  • Click-and-Pop Suppression
  • Short-Circuit and Thermal-Overload Protection
  • Available in 32-Pin Thin QFN (5mm x 5mm x 0.8mm) Package

Детали

Бренд

Typical_psrr

95 dB

Typ_output_power_x_chan_load

0.1×2@16Ohm W, 2×2@4Ohm

Totl_harmon_distortion_noise

0.002@8Ohm@1W %

Amplifier_type

Class-AB

Max_load_resistance

32 Ohm

Typical_voltage_gain

21.6 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS10636/MAXMS10636-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFN EP

Screening_level

Extended

Country_of_origin

United States

Eccn

EAR99

Функция

Headphone/Speaker

Htsn

8542330001

Input_signal_type

Single

Lead_finish

Gold

Max_power_dissipation

1990 mW

Max_processing_temp

260, 300

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

1

Operating_supply_voltage

5 V

Operating_temperature

-40 to 85 °C

Output_current

1700 mA

Output_signal_type

Differential, Single-Ended

Output_type

2-Channel Stereo

Pin_count

32

Power_supply_type

Quad

Product_dimensions

5 x 5 x 0.73 mm