Audio Amp Headphone/Speaker 2-CH Stereo 2.2W Class-D 28-Pin TQFN EP, MAX9791CETI+, Maxim Integrated

The MAX9791 combines a stereo 2W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA low-dropout (LDO) linear regulator in a single device. The MAX9792 combines a mono 3W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA LDO linear regulator in a single device. The MAX9791/MAX9792 feature Maxim"s DirectDrive headphone amplifier architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. High 107dB DC PSRR and low 0.006% THD+N ensure clean, low-distortion amplification of the audio signal. The ground sense feature senses and corrects for the voltage difference between the output jack ground and device signal ground. This feature minimizes headphone amplifier crosstalk by sensing the impedance in the ground return trace and correcting for it at the output jack. This feature also minimizes ground-loop noise when the output socket is used as a line out connection to other grounded equipment (for example, a PC connected to a home hi-fi system). The MAX9791/MAX9792 feature low RF susceptibility, allowing the amplifiers to successfully operate in close proximity to wireless applications. The MAX9791/MAX9792 Class D amplifiers feature Maxim"s spread-spectrum modulation and active emissions limiting circuitry. Industry-leading click-and-pop suppression eliminates audible transients during power-up and shutdown cycles. The MAX9791/MAX9792 wake-on-beep feature wakes up the speaker and headphone amplifiers when a qualified beep signal is detected at the BEEP input. For maximum flexibility, separate speaker and headphone amplifier control inputs provide independent shutdown of the speaker and headphone amplifiers. Additionally the LDO can be enabled independently of the audio amplifiers. The MAX9791/MAX9792 feature thermal-overload and output short-circuit protection. The devices are available in 28-pin TQFN packages and are specified over the -40°C to +85°C extended temperature range.

  • Windows Vista® Premium Compliant
  • Low EMI Filterless Class D Speaker Amplifiers Pass EN55022B Emissions Limit with 30cm of Speaker Cable
  • 180mW DirectDrive Headphone Amplifier
  • Excellent RF Immunity
  • Integrated 120mA LDO
  • Eliminates Headphone Ground Loop Noise
  • Wake-on-Beep Function
  • Click-and-Pop Suppression
  • Short-Circuit and Thermal-Overload Protection
  • Thermally Efficient, Space-Saving Package
    • 28-Pin TQFN-EP (4mm x 4mm x 0.75mm)

Характеристики

Бренд

Input_signal_type

Single

Typ_output_power_x_chan_load

0.18×2@32Ohm W, 2.2×2@4Ohm

Totl_harmon_distortion_noise

0.006@32Ohm@100mW %, 0.04@8Ohm@500mW

Amplifier_type

Class-D

Max_load_resistance

32 Ohm

Typical_voltage_gain

12 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS10681/MAXMS10681-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFN EP

Screening_level

Extended

Eccn

EAR99

Функция

Headphone/Speaker

Htsn

8542330001

Typical_psrr

107 dB

Max_power_dissipation

2286 mW

Lead_finish

Matte Tin

Max_processing_temp

260, 300

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

1

Operating_supply_voltage

3, 5 V

Operating_temperature

-40 to 85 °C

Output_current

1700 mA

Output_signal_type

Differential, Single-Ended

Output_type

2-Channel Stereo

Pin_count

28

Power_supply_type

Triple

Product_dimensions

4 x 4 x 0.73 mm

Артикул: MAX9791CETI+

Описание

The MAX9791 combines a stereo 2W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA low-dropout (LDO) linear regulator in a single device. The MAX9792 combines a mono 3W Class D power amplifier, a stereo 180mW DirectDrive headphone amplifier, and a 120mA LDO linear regulator in a single device. The MAX9791/MAX9792 feature Maxim"s DirectDrive headphone amplifier architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. High 107dB DC PSRR and low 0.006% THD+N ensure clean, low-distortion amplification of the audio signal. The ground sense feature senses and corrects for the voltage difference between the output jack ground and device signal ground. This feature minimizes headphone amplifier crosstalk by sensing the impedance in the ground return trace and correcting for it at the output jack. This feature also minimizes ground-loop noise when the output socket is used as a line out connection to other grounded equipment (for example, a PC connected to a home hi-fi system). The MAX9791/MAX9792 feature low RF susceptibility, allowing the amplifiers to successfully operate in close proximity to wireless applications. The MAX9791/MAX9792 Class D amplifiers feature Maxim"s spread-spectrum modulation and active emissions limiting circuitry. Industry-leading click-and-pop suppression eliminates audible transients during power-up and shutdown cycles. The MAX9791/MAX9792 wake-on-beep feature wakes up the speaker and headphone amplifiers when a qualified beep signal is detected at the BEEP input. For maximum flexibility, separate speaker and headphone amplifier control inputs provide independent shutdown of the speaker and headphone amplifiers. Additionally the LDO can be enabled independently of the audio amplifiers. The MAX9791/MAX9792 feature thermal-overload and output short-circuit protection. The devices are available in 28-pin TQFN packages and are specified over the -40°C to +85°C extended temperature range.

  • Windows Vista® Premium Compliant
  • Low EMI Filterless Class D Speaker Amplifiers Pass EN55022B Emissions Limit with 30cm of Speaker Cable
  • 180mW DirectDrive Headphone Amplifier
  • Excellent RF Immunity
  • Integrated 120mA LDO
  • Eliminates Headphone Ground Loop Noise
  • Wake-on-Beep Function
  • Click-and-Pop Suppression
  • Short-Circuit and Thermal-Overload Protection
  • Thermally Efficient, Space-Saving Package
    • 28-Pin TQFN-EP (4mm x 4mm x 0.75mm)

Детали

Бренд

Input_signal_type

Single

Typ_output_power_x_chan_load

0.18×2@32Ohm W, 2.2×2@4Ohm

Totl_harmon_distortion_noise

0.006@32Ohm@100mW %, 0.04@8Ohm@500mW

Amplifier_type

Class-D

Max_load_resistance

32 Ohm

Typical_voltage_gain

12 dB

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/MAXM/MAXMS10681/MAXMS10681-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFN EP

Screening_level

Extended

Eccn

EAR99

Функция

Headphone/Speaker

Htsn

8542330001

Typical_psrr

107 dB

Max_power_dissipation

2286 mW

Lead_finish

Matte Tin

Max_processing_temp

260, 300

Mounting

Surface Mount

Schedule_b

8542330000

Msl_level

1

Operating_supply_voltage

3, 5 V

Operating_temperature

-40 to 85 °C

Output_current

1700 mA

Output_signal_type

Differential, Single-Ended

Output_type

2-Channel Stereo

Pin_count

28

Power_supply_type

Triple

Product_dimensions

4 x 4 x 0.73 mm