Audio Amp Headphone 2-CH Stereo 0.095W Class-AB 14-Pin uSMD T/R, LM48820TM/NOPB, Texas Instruments

The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16? single-ended load, with less than 1% THD+N from a 3V power supply.The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM48820 has an internal fixed gain of 1.5V/V.

  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current
  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16O, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05µA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V
  • Характеристики

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.095×2@16Ohm W

    Totl_harmon_distortion_noise

    0.007@32Ohm@50mW %, 0.01@16Ohm@60mW

    Amplifier_type

    Class-AB

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    3.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48820&&fileType=pdf

    Supplier_package

    uSMD

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    14

    Power_supply_type

    Single

    Product_dimensions

    1.62 x 1.62 x 0.47 mm

    Артикул: LM48820TM/NOPB

    Описание

    The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16? single-ended load, with less than 1% THD+N from a 3V power supply.The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM48820 has an internal fixed gain of 1.5V/V.

  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current
  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16O, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05µA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V
  • Детали

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.095×2@16Ohm W

    Totl_harmon_distortion_noise

    0.007@32Ohm@50mW %, 0.01@16Ohm@60mW

    Amplifier_type

    Class-AB

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    3.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48820&&fileType=pdf

    Supplier_package

    uSMD

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    14

    Power_supply_type

    Single

    Product_dimensions

    1.62 x 1.62 x 0.47 mm