Audio Amp Headphone 2-CH Stereo 0.08W Class-AB 16-Pin DSBGA T/R, TPA4411YZHT, Texas Instruments

The TPA4411 and TPA4411M are stereo headphone drivers designed to allowthe removal of the output DC-blocking capacitors for reduced component count and cost. The TPA4411 and TPA4411M are ideal for small portable electronics where size and cost are critical design parameters. The TPA4411 and TPA4411M are capable of driving 80 mW into a 16-O load at 4.5 V. Both TPA4411 and TPA4411M have a fixed gain of 1.5 V/V and headphone outputs that have ±8-kV IEC ESD protection. The TPA4411 and TPA4411Mhave independent shutdown control for the right and left audio channels.The TPA4411 is available in a 2.18 mm × 2.18 mm WCSP and 4 mm × 4 mm Thin QFN packages.The TPA4411M is available in a 4 mm × 4 mm Thin QFN package.The TPA4411RTJ package is a thermally optimized PowerPAD package allowing the maximum amount of thermal dissipation and the TPA4411MRTJ is a thermally enhanced PowerPAD package designed to match competitive package footprints.

  • Space Saving Packages
    • 20-Pin, 4 mm × 4 mm Thin QFN
      • PA4411 — Thermally Optimized PowerPAD™ Package
      • TTPA4411M — Thermally Enhanced PowerPAD™ Package
    • 16-Ball, 2.18 mm × 2.18 mm WCSP
  • Ground-Referenced Outputs Eliminate
    DC-Bias Voltages on Headphone Ground Pin
    • No Output DC-Blocking Capacitors
      • Reduced Board Area
      • Reduced Component Cost
      • Improved THD+N Performance
      • No Degradation of Low-Frequency Response Due to Output Capacitors
    • Wide Power Supply Range: 1.8 V to 4.5 V
    • 80-mW/Ch Output Power into 16-O at 4.5 V
    • Independent Right and Left Channel
      Shutdown Control
    • Short-Circuit and Thermal Protection
    • Pop Reduction Circuitry
  • APPLICATIONS
    • Notebook Computers
    • CD / MP3 Players
    • Smart Phones
    • Cellular Phones
    • PDAs
  • Характеристики

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.08×2@16Ohm W

    Totl_harmon_distortion_noise

    0.01@16Ohm@25mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    16 Ohm

    Typical_voltage_gain

    63.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA4411&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_power_dissipation

    1200 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_current

    10@4.5V mA

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    2.3 x 2.3 x 0.48 mm

    Артикул: TPA4411YZHT

    Описание

    The TPA4411 and TPA4411M are stereo headphone drivers designed to allowthe removal of the output DC-blocking capacitors for reduced component count and cost. The TPA4411 and TPA4411M are ideal for small portable electronics where size and cost are critical design parameters. The TPA4411 and TPA4411M are capable of driving 80 mW into a 16-O load at 4.5 V. Both TPA4411 and TPA4411M have a fixed gain of 1.5 V/V and headphone outputs that have ±8-kV IEC ESD protection. The TPA4411 and TPA4411Mhave independent shutdown control for the right and left audio channels.The TPA4411 is available in a 2.18 mm × 2.18 mm WCSP and 4 mm × 4 mm Thin QFN packages.The TPA4411M is available in a 4 mm × 4 mm Thin QFN package.The TPA4411RTJ package is a thermally optimized PowerPAD package allowing the maximum amount of thermal dissipation and the TPA4411MRTJ is a thermally enhanced PowerPAD package designed to match competitive package footprints.

  • Space Saving Packages
    • 20-Pin, 4 mm × 4 mm Thin QFN
      • PA4411 — Thermally Optimized PowerPAD™ Package
      • TTPA4411M — Thermally Enhanced PowerPAD™ Package
    • 16-Ball, 2.18 mm × 2.18 mm WCSP
  • Ground-Referenced Outputs Eliminate
    DC-Bias Voltages on Headphone Ground Pin
    • No Output DC-Blocking Capacitors
      • Reduced Board Area
      • Reduced Component Cost
      • Improved THD+N Performance
      • No Degradation of Low-Frequency Response Due to Output Capacitors
    • Wide Power Supply Range: 1.8 V to 4.5 V
    • 80-mW/Ch Output Power into 16-O at 4.5 V
    • Independent Right and Left Channel
      Shutdown Control
    • Short-Circuit and Thermal Protection
    • Pop Reduction Circuitry
  • APPLICATIONS
    • Notebook Computers
    • CD / MP3 Players
    • Smart Phones
    • Cellular Phones
    • PDAs
  • Детали

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.08×2@16Ohm W

    Totl_harmon_distortion_noise

    0.01@16Ohm@25mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    16 Ohm

    Typical_voltage_gain

    63.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA4411&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_power_dissipation

    1200 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_current

    10@4.5V mA

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Differential

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    2.3 x 2.3 x 0.48 mm