Audio Amp Headphone 2-CH Stereo 0.05W Class-AB 12-Pin Micro SMD T/R, LM48860TL/NOPB, Texas Instruments

The LM48860 is a ground referenced, fixed-gain audio power amplifier capable of delivering 40mW per channel of continuous average power into a 16? single-ended load with less than 1% THD+N from a 3V power supply.The LM48860 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48860 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM48860 features a low-power consumption shutdown mode selectable for either channel separately. This is accomplished by driving either the SD_RC (Shutdown Right Channel) or SD_LC (Shutdown Left Channel) (or both) pins with logic low, depending on which channel is desired shutdown. Additionally, the LM48860 features an internal thermal shutdown protection mechanism.The LM48860 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM48860 has an internal fixed gain of 1.5V/V.

  • Fixed Logic Levels with Supply Voltage
  • Ground Referenced Outputs
  • High PSRR
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • PSRR at 217Hz (VDD = 3.0V): 80dB (typ)
  • Stereo Power Output at VDD = 3V, RL = 16?, THD+N = 1%: 40mW (typ)
  • Shutdown Current 0.1µA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Operating Voltage: 2.0V to 5.5V
  • Характеристики

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.05×2@32Ohm W

    Totl_harmon_distortion_noise

    0.014@32Ohm@25mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    3.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48860&&fileType=pdf

    Supplier_package

    Micro SMD

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    12

    Power_supply_type

    Single

    Product_dimensions

    2 x 1.5 x 0.42 mm

    Артикул: LM48860TL/NOPB

    Описание

    The LM48860 is a ground referenced, fixed-gain audio power amplifier capable of delivering 40mW per channel of continuous average power into a 16? single-ended load with less than 1% THD+N from a 3V power supply.The LM48860 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48860 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM48860 features a low-power consumption shutdown mode selectable for either channel separately. This is accomplished by driving either the SD_RC (Shutdown Right Channel) or SD_LC (Shutdown Left Channel) (or both) pins with logic low, depending on which channel is desired shutdown. Additionally, the LM48860 features an internal thermal shutdown protection mechanism.The LM48860 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM48860 has an internal fixed gain of 1.5V/V.

  • Fixed Logic Levels with Supply Voltage
  • Ground Referenced Outputs
  • High PSRR
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • PSRR at 217Hz (VDD = 3.0V): 80dB (typ)
  • Stereo Power Output at VDD = 3V, RL = 16?, THD+N = 1%: 40mW (typ)
  • Shutdown Current 0.1µA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Operating Voltage: 2.0V to 5.5V
  • Детали

    Бренд

    Typical_psrr

    80 dB

    Typ_output_power_x_chan_load

    0.05×2@32Ohm W

    Totl_harmon_distortion_noise

    0.014@32Ohm@25mW %

    Amplifier_type

    Class-AB

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    3.52 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LM48860&&fileType=pdf

    Supplier_package

    Micro SMD

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Htsn

    8542330001

    Input_signal_type

    Single

    Lead_finish

    Tin/Silver/Copper

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    12

    Power_supply_type

    Single

    Product_dimensions

    2 x 1.5 x 0.42 mm