Audio Amp Headphone 2-CH Stereo 0.032W Class-G 16-Pin DSBGA T/R, TPA6141A2YFFT, Texas Instruments

The TPA6141A2 (also known as TPA6141) is a Class-G DirectPath stereo headphone amplifier with selectable gain. Class-G technology maximizes batterylife by adjusting the voltage supplies of the headphone amplifier based on the audio signal level. At low level audio signals, the internal supply voltage is reduced to minimize power dissipation. DirectPathTM technology eliminates external DC-blocking capacitors. The device features fully differential inputs with an integrated low pass filter to reduce system noise pickup between the audio source and the headphone amplifier and to reduce DAC out-of-band noise. The high power supply noise rejection performance and differential architecture provides increased RF noise immunity. For single-ended input signals, connect INL+ and INR+ to ground. The device operates from a 2.5 V to 5.5 V supply voltage. Class-G operation keeps total supply current below 5.0 mA while delivering500 µW per channel into 32 O. Shutdown mode reduces the supply current to less than 3 µA and is activated through the EN pin. The device has built-in pop suppression circuitry to completely eliminate disturbing pop noise during turn-on and turn-off. The amplifier outputs haveshort-circuit and thermal-overload protection along with ±8 kV HBM ESD protection, simplifying end equipment compliance to the IEC 61000-4-2 ESD standard.

  • TI Class-G Technology Significantly Prolongs Battery Life and Music PlaybackTime
    • 0.6 mA / Ch Quiescent Current
    • 50% to 80% Lower Quiescent Current Than Ground-Referenced Class-AB Headphone Amplifiers
  • DirectPathTM Technology Eliminates Large Output DC-Blocking Capacitors
    • Outputs Biased at 0 V
    • Improves Low Frequency Audio Fidelity
  • Active Click and Pop Suppression
  • Fully Differential Inputs Reduce System Noise
    • Also Configurable as Single-Ended Inputs
  • SGND Pin Eliminates Ground Loop Noise
  • Wide Power Supply Range: 2.5 V to 5.5 V
  • 100 dB Power Supply Noise Rejection
  • Built-in Input Low Pass Filter
  • Gain Settings: 0 dB and 6dB
  • Short-Circuit Current Limiter
  • Thermal-Overload Protection
  • ±8 kV HBM ESD Protected Outputs
  • 0,4 mm Pitch, 1,6 mm × 1,6 mm 16-Bump WCSP (YFF) Package
  • APPLICATIONS
    • Cellular Phones / Music Phones
    • Smart Phones
    • Portable Media / MP3 Players
    • Portable CD / DVD Players
  • Характеристики

    Бренд

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    0.032×2@32Ohm W

    Totl_harmon_distortion_noise

    0.01@32Ohm@20mW %

    Amplifier_type

    Class-G

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    8 dB

    Min_cmrr

    68 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA6141A2&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Typical_psrr

    105 dB

    Lead_finish

    Tin/Silver/Copper

    Input_signal_type

    Differential

    Max_power_dissipation

    1250 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_current

    2@1.3V

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    1.9 x 1.9 x 0.43 mm

    Артикул: TPA6141A2YFFT

    Описание

    The TPA6141A2 (also known as TPA6141) is a Class-G DirectPath stereo headphone amplifier with selectable gain. Class-G technology maximizes batterylife by adjusting the voltage supplies of the headphone amplifier based on the audio signal level. At low level audio signals, the internal supply voltage is reduced to minimize power dissipation. DirectPathTM technology eliminates external DC-blocking capacitors. The device features fully differential inputs with an integrated low pass filter to reduce system noise pickup between the audio source and the headphone amplifier and to reduce DAC out-of-band noise. The high power supply noise rejection performance and differential architecture provides increased RF noise immunity. For single-ended input signals, connect INL+ and INR+ to ground. The device operates from a 2.5 V to 5.5 V supply voltage. Class-G operation keeps total supply current below 5.0 mA while delivering500 µW per channel into 32 O. Shutdown mode reduces the supply current to less than 3 µA and is activated through the EN pin. The device has built-in pop suppression circuitry to completely eliminate disturbing pop noise during turn-on and turn-off. The amplifier outputs haveshort-circuit and thermal-overload protection along with ±8 kV HBM ESD protection, simplifying end equipment compliance to the IEC 61000-4-2 ESD standard.

  • TI Class-G Technology Significantly Prolongs Battery Life and Music PlaybackTime
    • 0.6 mA / Ch Quiescent Current
    • 50% to 80% Lower Quiescent Current Than Ground-Referenced Class-AB Headphone Amplifiers
  • DirectPathTM Technology Eliminates Large Output DC-Blocking Capacitors
    • Outputs Biased at 0 V
    • Improves Low Frequency Audio Fidelity
  • Active Click and Pop Suppression
  • Fully Differential Inputs Reduce System Noise
    • Also Configurable as Single-Ended Inputs
  • SGND Pin Eliminates Ground Loop Noise
  • Wide Power Supply Range: 2.5 V to 5.5 V
  • 100 dB Power Supply Noise Rejection
  • Built-in Input Low Pass Filter
  • Gain Settings: 0 dB and 6dB
  • Short-Circuit Current Limiter
  • Thermal-Overload Protection
  • ±8 kV HBM ESD Protected Outputs
  • 0,4 mm Pitch, 1,6 mm × 1,6 mm 16-Bump WCSP (YFF) Package
  • APPLICATIONS
    • Cellular Phones / Music Phones
    • Smart Phones
    • Portable Media / MP3 Players
    • Portable CD / DVD Players
  • Детали

    Бренд

    Htsn

    8542330001

    Typ_output_power_x_chan_load

    0.032×2@32Ohm W

    Totl_harmon_distortion_noise

    0.01@32Ohm@20mW %

    Amplifier_type

    Class-G

    Max_load_resistance

    32 Ohm

    Typical_voltage_gain

    8 dB

    Min_cmrr

    68 dB

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=TPA6141A2&&fileType=pdf

    Supplier_package

    DSBGA

    Country_of_origin

    United States

    Eccn

    EAR99

    Функция

    Headphone

    Typical_psrr

    105 dB

    Lead_finish

    Tin/Silver/Copper

    Input_signal_type

    Differential

    Max_power_dissipation

    1250 mW

    Max_processing_temp

    260

    Mounting

    Surface Mount

    Schedule_b

    8542330000

    Msl_level

    1

    Operating_supply_current

    2@1.3V

    Operating_temperature

    -40 to 85 °C

    Output_signal_type

    Single-Ended

    Output_type

    2-Channel Stereo

    Pin_count

    16

    Power_supply_type

    Single

    Product_dimensions

    1.9 x 1.9 x 0.43 mm