Audio Amp Earpiece/Microphone/Speaker 1-CH Mono 0.083W Class-AB 25-Pin Micro SMD T/R, LMV1099TL/NOPB, Texas Instruments

The LMV1099 is an uplink and downlink voice intelligibility enhancing analog IC, ideally suited for mobile handsets. Uplink voice intelligibility is improved by rejecting far-field noise through a unique two-microphone solution. Downlink voice intelligibility is improved by enhancing the SNR (Signal-to-Noise Ratio) between the downlink voice and the ambient noise environment at the user’s earpiece.The LMV1099 preserves uplink near-field voice signals within close range of the microphones while rejecting far-field acoustic noise greater than 0.5m from the microphones. The LMV1099 also enhances downlink voice intelligibility by improving near-field SNR based on the user’s environment. The analog circuitry adapts dynamically to both the user’s ambient noise environment as well as the downlink signal amplitude to ensure optimum SNRI (signal-to-noise ratio improvement). The downlink path also provides uplink noise attenuation through an adjustable high pass filter before the SNR enhanced downlink voice reaches the user’s earpiece. Unlike digital-based noise reduction solutions, the all-analog low power consuming LMV1099 increases both uplink and downlink voice intelligibility without DSP-type artifacts, distortions or processing delays.

  • Noise Reduction Without DSP-Type Artifacts
  • Adapting AGC (Automatic Gain Control) on Ambient Noise Level and Downlink Signal Strength
  • Downlink Adjustable Noise-reducing High Pass Filter
  • Separate Uplink and Downlink Enable Functions
  • No Added Process Delays
  • Low Power Consumption
  • Shutdown Function
  • Maximum AGC Limiter
  • Differential Inputs and Outputs for Noise Immunity
  • Earpiece Amplifier
  • Available in a 25-Bump DSBGA Package
  • Uplink Far Field Noise Suppression (Electrical FFNSE at f = 1kHz) 33dB (typ)
  • Near-Field SNR Enhancement 6 to 18dB (typ)
  • Downlink SNRIE 16dB (typ)
  • Supply Voltage Range 2.7V to 5.5V
  • Supply Current (VDD = 3.6V) 3.8mA (typ)
  • Shutdown Current 0.06µA (typ)
  • Uplink PSRR (f = 217Hz) 106dB (typ)
  • Downlink SNR (A-weighted) 102dB (typ)
  • Downlink THD+N 0.03% (typ)
  • Earpiece Output Power (RL = 32O) 83mW (typ)
  • Характеристики

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Single

    Pin_count

    25

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Tin/Silver/Copper

    Htsn

    8542330001

    Typical_psrr

    106 dB

    Функция

    Earpiece/Microphone/Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    Micro SMD

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LMV1099&&fileType=pdf

    Min_cmrr

    50 dB

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    32 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.03@32Ohm@35mW %

    Typ_output_power_x_chan_load

    0.083×1@32Ohm W

    Product_dimensions

    2.77 x 2.64 x 0.41 mm

    Артикул: LMV1099TL/NOPB

    Описание

    The LMV1099 is an uplink and downlink voice intelligibility enhancing analog IC, ideally suited for mobile handsets. Uplink voice intelligibility is improved by rejecting far-field noise through a unique two-microphone solution. Downlink voice intelligibility is improved by enhancing the SNR (Signal-to-Noise Ratio) between the downlink voice and the ambient noise environment at the user’s earpiece.The LMV1099 preserves uplink near-field voice signals within close range of the microphones while rejecting far-field acoustic noise greater than 0.5m from the microphones. The LMV1099 also enhances downlink voice intelligibility by improving near-field SNR based on the user’s environment. The analog circuitry adapts dynamically to both the user’s ambient noise environment as well as the downlink signal amplitude to ensure optimum SNRI (signal-to-noise ratio improvement). The downlink path also provides uplink noise attenuation through an adjustable high pass filter before the SNR enhanced downlink voice reaches the user’s earpiece. Unlike digital-based noise reduction solutions, the all-analog low power consuming LMV1099 increases both uplink and downlink voice intelligibility without DSP-type artifacts, distortions or processing delays.

  • Noise Reduction Without DSP-Type Artifacts
  • Adapting AGC (Automatic Gain Control) on Ambient Noise Level and Downlink Signal Strength
  • Downlink Adjustable Noise-reducing High Pass Filter
  • Separate Uplink and Downlink Enable Functions
  • No Added Process Delays
  • Low Power Consumption
  • Shutdown Function
  • Maximum AGC Limiter
  • Differential Inputs and Outputs for Noise Immunity
  • Earpiece Amplifier
  • Available in a 25-Bump DSBGA Package
  • Uplink Far Field Noise Suppression (Electrical FFNSE at f = 1kHz) 33dB (typ)
  • Near-Field SNR Enhancement 6 to 18dB (typ)
  • Downlink SNRIE 16dB (typ)
  • Supply Voltage Range 2.7V to 5.5V
  • Supply Current (VDD = 3.6V) 3.8mA (typ)
  • Shutdown Current 0.06µA (typ)
  • Uplink PSRR (f = 217Hz) 106dB (typ)
  • Downlink SNR (A-weighted) 102dB (typ)
  • Downlink THD+N 0.03% (typ)
  • Earpiece Output Power (RL = 32O) 83mW (typ)
  • Детали

    Бренд

    Input_signal_type

    Differential

    Power_supply_type

    Single

    Pin_count

    25

    Output_type

    1-Channel Mono

    Output_signal_type

    Differential

    Operating_temperature

    -40 to 85 °C

    Msl_level

    1

    Schedule_b

    8542330000

    Mounting

    Surface Mount

    Max_processing_temp

    260

    Lead_finish

    Tin/Silver/Copper

    Htsn

    8542330001

    Typical_psrr

    106 dB

    Функция

    Earpiece/Microphone/Speaker

    Eccn

    EAR99

    Country_of_origin

    United States

    Supplier_package

    Micro SMD

    Specifications

    http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=LMV1099&&fileType=pdf

    Min_cmrr

    50 dB

    Typical_voltage_gain

    36 dB

    Max_load_resistance

    32 Ohm

    Amplifier_type

    Class-AB

    Totl_harmon_distortion_noise

    0.03@32Ohm@35mW %

    Typ_output_power_x_chan_load

    0.083×1@32Ohm W

    Product_dimensions

    2.77 x 2.64 x 0.41 mm