Analog Video Crosspoint 100MHz 8 x 4 40-Pin PDIP

The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels. The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two. In each device, any one of eight input lines can be connected to any of four output amplifiers. The output buffers are capable of driving loads of 75O. Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPI, QSPI, and Microwire compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses. Three-state amplifier output capability makes it possible to multiplex MAX458/MAX459s to form larger switch networks. The output buffers can be disabled individually or the entire device can be shut down to conserve power.

• 100MHz Unity-Gain Bandwidth
• 300V/µs Slew Rate
• Low 0.05° Differential Phase Error
• Low 0.01% Differential Gain Error
• Directly Drives 75O Cables
• Fast 60ns Switching Time
• High-Z Amplifier Output Capability
• Shutdown Capability
• 16-Bit Serial and 6-Bit Parallel Address Modes
• 40-Pin DIP and 44-Pin PLCC Packages